Weed control is one of the most important activities that every family needs to engage from time to time in order to maintain a decent and great lawn.
In the process of wanting to achieve all this, there is one tool that every family needs in order to clear weeds and that valuable tool is the weed eater echo.
However, it should be noted that the weed eater echo is a machine that runs on fuel, and that fuel is not a charity donation but one that is bought by your hard-earned money.
This fact that the weed eater runs on gas behooves homeowners to device means and come up with strategies that will enable them to get optimum service from these weed eaters by making optimal use of costly fuel.
One of the best and easiest ways of achieving optimal fuel consumption is through the adjustment of the carburetor.
This article therefore seeks lay out an elaborate outline of how you can do this under different circumstances in order to attain an optimal combination of air and fuel.
Table of Contents
The altitude of your home may affect the performance of your weed eater echo. This is because the carburetor needs a good supply of air in order to function well.
However, it is important that you check the air filter and clean off all the residues.
You need to clean the spark arrestor screen and ensure that the trim lines and cutting head are all in their correct length.
You can confirm the correctness of their length by ensuring that the lines stretch their way to the blade on the deflector. After getting through with each of these stages, ignite the engine and give it some time to warm up.
At higher sea levels
On the side of your weed eater echo, locate the screws that are used to adjust low and high speed respectively.
Turn these screws anticlockwise in order to achieve a decent level of restricting the flow of air into the carburetor and in turn this restriction will supply extra fuel.
In order to attain optimal results and correct setting, you may be required to adjust the screws as much as possible.
In places with higher altitude, your weed eater echo only needs a lean mixture of that will provide the engine with a low amount of fuel.
You will need to turn the high and low speed adjustment screws left to right in order to achieve the above results.
For you to attain an optimal mixture of fuel, you will be required to adjust the screws until they reach their extreme end.
Dealing with matters of idleness
You can change the trimmer’s idling speed through the adjusting of the carburetor in order to optimize its functionality.
To do this, you will need to get to the screw that adjusts the idle speed and then change its positioning in accordance with idling issues at hand.
Irregularity with idling speed
When the mixture of fuel in the weed eater echo is very lean, it may lead to the irregularity of the weed eater’s idling or it may even interfere with the weed whacker’s proper acceleration.
In such cases, you will need to turn the low speed adjusting screw anticlockwise till the engine regains its normal acceleration.
When the engine cuts off during idling
In cases where the weed eater’s engine goes off while the trimmer is idling, you need to make adjustment to the idle speed.
You will need to idle speed adjusting screw left to right until the engine regains smooth running.
Read more related product reviews
- Best Cordless Electric Weed Eater
- Best Corded Electric Weed Eater
- Best Gas Weed Eater
- Best Weed Wacker Reviews
- Best Push Lawn Mower