Brother PE-770 is a cool sewing machine of the Brother’s band. This is a type of sewing machine that provides you accurate experience along with good stitching designs. Therefore, you can easily make a good stitch over any fabric. Before you are going to use the machine, you will need to check needle to hook timing properly.
This is one of the biggest problems with the sewing machines especially Brother PE-770 model. Because of not having a proper needle to hook timing, the stitches are not good enough to provide the solid design. Moreover, this damages the fabric too.
Today we will show you how to check needle to hook timing properly. Just follow our tutorial and check it in a short time.
Table of Contents
First of all, you will need to open the side and bottom panel to work. Use a suitable screw driver to open the panel to work. Then, take out the bobbin from the metal frame of the sewing machine.
When the needle is down, it connects with the bobbin area and creates a loop. At the time of upping the needle, the loop hits the hook.
Measure & Check the Distance
Normally, the Brother PE-770 machine works well when the distance between the eye of the needle and bobbin metal is only 2mm. in this case, you can use any measuring tool to measure 2 mm.
Or, you can also use to mark a paper with 2 mm and put it to the eye of the needle. Make sure that the needle is properly down. Now measure the distance and it must be 2 mm.
The sewing machine works properly when the distance is okay. Otherwise, you will need to fix the thing to work it properly.
Fix the Distance
This is important to fix the distance. Otherwise, the needle will not able to create a loop and capture the thread of bobbin to work. In this case, you will need to see the manual.
You will notice that the needle must be up properly and it should not lose. In this case, you will find the screw that tightens the needle properly. Therefore, check the screw and make sure that it is enough time.
On the other hand, in the internal mechanism, you will find a align bar over the screw bar. Open the panel and find the align bar. Make sure this is 1.5 mm only because this is an ideal measurement to perform the internal mechanism. You can use a align key and use 1.5 mm bar to enter. If it holds tightly, then, this is okay to work!
Enter the Bobbin & Check the Loop
Now it is time to enter the bobbin and check that the needle thread is creating the loop. You need to use the head top over the bobbin in order to keep the bobbin safe.
Join the Panels
Your task is over. Now you can join the panels in the machine for further work. Don’t worry because you will need to fix or check the things once.
Sometimes you may face the same trouble. This is mainly for not joining the needle properly into the sewing machine.
Hope you will never feel the same problem in the Brother PE-770. The problem will be fixed whenever you will go through the process. Do you have any question? Then, you can leave any message and we will be there to fix your problem! Use a good measuring tool when measuring the distances because that part is really important.