You may be witnessing that in today’s fast paced world, there is a lot of competition in each sector and industry; same is the case with wood working tools. Whether you wish to have a contractor saw, cabinet saw or for one of the Best Portable Table Saws For Your Workshop, you will come across a range of different options available. The trick lies in choosing the ideal one for you. Table saws offer you great convenience of ripping through different materials but these machines also may cause some problems. Some of you may be complaining about your table saw not starting at all, some of you may be experiencing inaccurate and improper cuts and some may have other issues. But all of these problems may not need you to take your table saw to a professional or an expert for repair purpose, some of these issues can be solved by trying to troubleshoot yourself.
Table of Contents
Common Problems with a table saw
Let us go through some common problems that your table saws may have that would be troubling you and affecting your work effectiveness.
- Table saw won’t startup.
- Blade is not rising or tilting.
- Table saw is excessively vibrating and shaking.
- Out of whack crosscuts.
- Material kickbacks from the blade.
- Motor is overheated.
Solutions to some common table saw problems
- If the table saw is not starting, there may be some issues with power supply. Unplug and then reconnect the power supply. Check the socket by connecting some other appliance. If that appliance is working, there may be some issues with your power cord. Try replacing the power cord.
- If the table saw is starting but the speed is quite low than usual. In that case you need to check if the extension cord is not of appropriate length to offer enough power to the saw. Replace the extension cord by trying with a shorter one and connect the saw again.
- If the blade of the saw is not rising or tilting. Try blowing the dust and dirt of the saw out of the elevation and tilting function. The problem may be arising because of clogging of debris and dirt that may be blocking movement of the blade.
- If the table saw is vibrating excessively. Check if the saw is mounted properly at the work place with legs straighten and placed firmly. Check all the parts of the tool to see if they are properly aligned and tightened and then try using table saw again.
- If you are experiencing out of whack crosscuts. Check the blade and adjust it properly for cuts. Also check the fence or miter gauge for proper placement and alignment.
- Kickbacks usually occur because of misalignment and when parts are not properly adjusted. Tighten knobs and screws and check to see if the blade guard is adjusted properly. A missing blade guard may also result in wood binding against the blade and a dangerous kickback can occur. Kickbacks occur when the blade of the saw catches the wood and cannot move forward. This results in dangerous splitting of wood and it flies out with a really high speed that can cause a dangerous injury for operator.
Table Saw Motor Problems
Apart from alignment and adjustments of parts, if you are experiencing problem with use of your table saw, it may be because of various issues with table saw motor.
- Dragging a lot may slow down the blade as the blade has to push through hard in order to cut through the wood. If a blade has more teeth count and depending upon the size of the stock, a blade may need to drag a lot. More dragging may cause more heat to create and it would affect motor. Table saw motor may become overheated and if not shut down, it can cause a permanent damage to the motor.
- If the motor is overheated or over used, it may need to drag more and it could result in kickbacks to occur. You must be careful about use of a table saw motor. Too worn out or weak motor may give you ineffective performance.
- Another thing that can cause table saw motor to wear out excessively is the choice of wrong blade and feeding rate. If your saw is experiencing trouble in cutting the material you are feeding with the blade installed, it will have to struggle and thus excessive strain will be placed on the motor causing it to wear out easily. You must control the stock feeding rate according to instructions given on your saw manual. Do not make it too fast or too slow as it would affect performance and lifetime of motor.
- Table saws produce a lot of dust when operating and this dust usually scatters away however some of it may make its way to the motor. Clogging of dust is dangerous as it may block motor operation. Keep an eye on cleaning and maintaining your table saw motor to avoid any dust to clog and cause problems.
Table saws reviews suggest that these are powerful tools designed for cleaner and smoother cuts of wood and these can prove useful for varied construction projects. Following proper protocols of safety, cleaning and maintenance with proper usage can give you a lifetime of trouble-free working. Some simple problems may arise that you can take care by yourself. For issues that you find unfamiliar and uncommon, take advice of repair experts in order to avoid any permanent damage.