When you buy through links on our site, we may earn an affiliate commission at no cost to you.
The embroidery machine is one of the most interesting but hard to learn sewing machine in the market. There are many models of embroidery machine available that you can use for creating a new design on your fabric. However, learning the use of embroidery machine is very hard and time-consuming. For that reason, you must need to know some tips to use the embroidery machine perfectly and efficiently.
Do you want to learn to use the machine quickly and efficiently? Then, you must need some tips that will help you to learn to use the embroidery machine properly. Therefore, we have researched and found some tips that would help you to learn using the machine more quickly and efficiently. The tips are really great for the users especially for beginner users of embroidery machine.
Table of Contents
1. Have Proper Knowledge about the Embroidery Machine
This is important to have a proper knowledge about the embroidery machine that you have purchased. In this case, you should read the instruction book, get the accessories properly in the machine. Therefore, you will have a better idea about the machine and can easily handle it.
2. Withdraw the Thread for Embroidering
Withdrawing the thread for embroidering in the embroidery machine is a good idea to have a better experience. Basically, there are 6 lines in the machine depending on different types of fabrics. You will need to use the head point of the thread and withdraw it properly.
The line thread of the machine is easy to change and withdraw in the machine. Different lines of thread are special and efficient for different types of fabrics. For that reason, you will need to identify the right thread line for your fabric. Moreover, the number of the thread also depends on the design you are using. Otherwise, you will run short of thread in the middle of the design.
3. Flatten As Strong As You Can
Try to flatten the fabric as strong as possible because this will help you to make a design properly. You should hold the fabric tightly in order to find the center of the fabric. Then, you can start the embroidery machine in order to make embroidery design. If you can’t find the center, your design will go elsewhere and damage the design or fabric. In addition, you should understand the right speed level of the machine too. Too much speed cans the fabric slippery and hard to control while embroidering.
4. Identify the Area for Embroidering
The new users find it difficult to identify the embroidering area of the machine. For that reason, you should identify the area before you start embroidering. In this case, you can use any raw fabric in order to get the point.
In order to get a good and quick embroidering design, you should use both of your hands. Otherwise, you may lose the balance of controlling the fabric and damage the design of the fabric.
5. Avoid the Thread to Be Messy
The embroidering thread should not become messy; otherwise, this will make you both frustrated and angry. In this case, you can give some time to manage the thread and don’t make the thread too much flat.
6. Apply Oil to the Withdrawn
You should use some oil on the thread withdrawn head regularly. This will make the head slippery and give you smoothly to withdraw. This is one of the biggest problems that waste the time of the users. When you will apply oil liquid in the embroidery machine, this will keep it smooth. As a result, the quality and color of the thread will remain same and good enough.
Conclusion
These are some of the tips to use the embroidery machine efficiently and quickly for beginners. In fact, the tips will always help the embroidering professionals to finish the work properly and in a real speed. Don’t worry about the design, but you will need to keep the fabric flat enough during embroidering.
Leave a Reply