If your vacuum stops working in critical moments, you may be very frustrated! Some people are tempted to buy another vac. However, most vacuum cleaner problems are simple to fix.
Whether your vacuum is a new or an old model, you can find a solution to its problem. Therefore, if you spend some time investigating the problem, you may end up saving a lot of cash!
>> Check the best vacuum cleaner that you never have to worry about troubleshooting now!
When your vacuum develops a technical issue, follow these tips to fix it.
Table of Contents
Inspect the Bag
When a vacuum cleaner is not functioning correctly, the first step should be checking the bag or cylinder. If it becomes full, the vacuum will not produce any suction. Simply remove the bag and replace it with a new one.
For vacuums that come with a washable dirt bag, empty the bag, clean, leave it to dry. Then fit it back to the cleaner. Resume your washing to see if the vacuum picks up dust and dirt.
Replacing or emptying the bag before it’s totally full keeps the vac running more efficiently. It also puts less strain on the vacuum’s motor making the machine more durable.
Suction without Picking Dirt and Dust
If your cleaner produces enough suction, but it doesn’t pick up dust and dirt, inspect the hose for any blockages. Detach the hose from your vacuum and check it for any holes or cracks.
If you find any crack or hole, repair it with duct tape. This tape works great to restore the condition of your vacuum cleaner.
In case, of any blockages, push a long, thin device like a broom handle or wire through the length of the hose. Connect the hose, plug on power and try to vacuum and see what happens. The hose is a very vital part of a vacuum cleaner, and it should be frequently checked for splits and cracks.
The brushes may also prevent the vacuum from functioning normally. If all the other parts are fine but your vacuum still won’t function, check the brushes. Swivel the vacuum upside down and remove hair and other substance from the brushes, particularly at the sides.
Fixing a Broken Belt
A broken or a worn belt is a common problem with vacuum cleaners. Unsnap or unscrew the cover plate beneath the brush and check the vacuum belt for tightness and wear.
In case, it looks broken or split, or it has excessive play, replace it. To replace the belt, simply remove the brush out the housing. Then slide off the belt prior to installing a new one.
After fixing a new belt, rotate the brush by your hand several times to ensure it revolves tightly but smoothly.
Fixing a Vacuum that Shows No Power
In case, the power to the vacuum breaks, and it fails to start, inspect the circuit. Is the cleaner having a blown fuse or has it stamped a circuit breaker?
Check the fuse or circuit breakers and simply replace or reset it. Switch on the vacuum cleaner and check if it functions properly.
If it continues failing, and everything seems fine, try unplugging some appliances from the circuit and try it again.
Inspect the cord. Is the cord worn in the machine or at the plug end? If it is worn, that could be the problem. Try replacing the cord and ensure the wires are attached to the correct terminals. Then plug the machine back in, switch it on and try it to see if it picks up dirt and dust.
8 Safety Precautions When Handling a Vacuum Cleaner
- Unplug the vacuum cleaner from the power outlet after cleaning. This guard the plug and cord and assists prevent accidents.
- If your cleaner is not labeled for outdoor use, only use it inside your house and store it indoors.
- Never clean a wet surface. Because it can damage the motor and it also puts you at risk of electrical shock. If you accidentally use your cleaner to vacuum wet surfaces, dry it thoroughly or have it inspected by a technician before use.
- Avoid dropping your vacuum cleaner. In case of accidental fall, take it to a technician before use.
- Never pull the cord of a vacuum cleaner. Always ensure the cord is away from corners and sharp edges.
- Don’t place fingers in/on any moving parts of the vacuum cleaner.
- Never use your vacuum to clean flammable or toxic substances.
- Don’t use your vacuum to pick up sharp or hard objects like nails, glass, coins or screws.