When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
Top 10 Rated amber led marker lights in 2021 Comparison Table
- 12V 3/4" Round Bullet Mini Grommet Side Marker Light ,3 PCS High Quality SMD LED Inside of the Lamp Offer Extreme Bright light. SAE P2 PC,DOT. Waterproof PC Lens,Shock Proof ,Dust Proof ,Rubber Cover Sealed Light.
- Universal All Cars Trailer Clearance Bus Van Caravan Boat Lorry Truck. Easy to install in all locations : Side Front Rear Undercarriage As Exterior Safety Signal Light At Night.
- ENJOY 5 YEAR QUALITY WARRANTY , Our Strict Quality Control System, We Test Each Item and 100% Ensure In Good Condition Before We Ship. Offering Customer Technical Service, Feel Free Contact Us for Technical, Installation and Use Question.
- Oval Amber 2.5" 2 Diodes LED Clearance Side Marker Light For Trailer Truck Pickups
- 2 Diodes Trailer lighting,Led marker Clearance Light,Side Marker Assemblies Replacements
- Universal for Pickups,Truck Trailers,SUV vanaravan and Boat Lorry Bus; Hardwired with 2 wires: Black is ground and red is positive;
- Functions as Led clearance light, side marker or identification light,trailer Light etc.
- Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc.
- CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.
- BETTER THAN THE REST - Our lights are IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.
- ATTENTION TO DETAIL- Top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.
- CONSPICUOUS - The high intensity LED is placed behind a light dispersing lens designed to intensify light output and surrounded by an effective reflex reflector for improved day and nighttime visibility.
- YOU'RE COVERED - Designed with water drain holes, our lights are better equipped to deal with condensation and moisture buildup than other undrained marker lights, that means clearer light, better performance, and a longer life.
- Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;
- These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;
- Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;
- The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow wire is positive; These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them; As every truck lamp come with two wires, they can only use as one function a time;
- Tips and Warranty: 1. These led lights are not dimmable; 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true; 3. When you wire several lights together, you can wire them in parallel; 4. These trailer lights are polarity dependent and They will not work if polarity is reversed; 5.These are Waterproof, not submersible. Please do not use it under water; We offer 1 Year Warranty for these 12v amber led strip bar lights;
- Partsam's High Quality Thin-design Smoke Black Lens Amber LED Led Marker Light, Stylish & Functional as side marker lights, clearance lights, indicator lights, identificaiton lights, utility lights etc.;
- DC12V Each Light with High Quality 6 LEDs; Waterproof + Shock Proof + Viberation + Dust Proof; Brightness: 120 lumen each light with 6 pcs High Quality SMD LED 50,000hrs life span.
- Two-wire design includes both lead wire and ground wire for mounting to all surfaces; The Black Wire is Negative/Ground. Light Dimension: 9.6cm x 2cm x 1cm (3.8" x 0.8" x 0.4") approx. Distance between center-to-center holes: 8.2cm (3.2") approx. Easy to Install with FREE Screw set included & Foam tape base.
- Fits for most Buses/Trucks/Trailers/Lorries; can be used for side marker light, rear light, indicator light, turn signal light, rear tail light, license light, Parking light etc. Anywhere you can image as well as the size fit
- Easy to Install, Long-lasting and Durable, Longer Life LED Lifetime, Minimal Maintenance Cost. Good Looking and Utility, Energy Saving, Environmental Protection, Waterproof, Reliable and Safe. Increase Safety when Driving at Night.
- (Set of 2) 250 lumens per 168 194 LED bulb, total 500 lumens for both 168 194 LED Lights Bulbs. LED Type: 18 pieces high power & high quality 3014 SMD led chips per 194 168 LED bulb., triple brighter than normal 5050 SMD & 500% brighter than stock halogen T10 wedge bulb.
- Optional colors: Amber Yellow; Volts: 12V - 18V DC with built in current resistance,360° view angle. No UV or IR radiation, just plug and play. non-polarity.
- Base Type: T10 Wedge fits both T10/T15 base. Direct replacement for 158 161 168 168A 168NA 175 194 194NA 2821 2825 2827 147 152 159 555 558 585 906 912 921 1250 1251 2886X 3652 658 PC168 PC175 PC194 PC195 W5W W5WLL2825L,W10W, etc.
- It may fit one or 2 applications which varies on the vehicle's trim: reading lights, exterior license plate tag light, side door courtesy light, interior map lights, dome lights, parking city lights, side marker lights, glove box lights, trunk cargo/room lights, stepwell lights, luggage compartment light, inner tail light bulb,etc.
- Warranty: Fully "ONE YEAR" guaranteed for manufacturer quality. Energy-Saving, Low temperature, Low Power Consumption, Longer lifespan up to 50,000 hrs, best value in the market.
- This listing features for (10) Smoke/Amber, round, mini-light.
- It can be function as clearance, side marker, identification light, turn signal light or trailer light etc.
- Great replacement Part for incandescent lights Its 2-Wire design including lead and ground wires ensures for mounting to all surfaces.
- 3/4" round LED lamp, you can use it anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel; sealed; waterproof; recessed grommet mount; 2-wire(black for positive & white for ground); single LED; Smoke lens
- Applications: Works on any 12V Vehicles such as truck trailers pickup cars.
- Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.
- Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light
- Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance
- Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse
- To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center holeTo run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center hole. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center hole
- 2 Year Warranty with MADCATZ: Our products come with a warranty. If you have any questions or any issues with using our product, please directly contact us for advice and remedy.
- Pack of 200: There are 200 pcs of 3/4 inch round amber side marker lights with rubber grommets in a set, the led comes with mini size, it won’t take a large number of areas to install.
- Good Design: It comes with 3 PC High Quality 2835 SMD LEDs provided an extra brightness to make your night safety, the light can stand by with 50,000 hrs lifespan but power saving and low power consumption.
- Work: Widely used as Side Marker Lights, Trailer Lights, Signal Lights, etc. and work on any 12V DC vehicles like Truck, RV, Cabin Cars, Caravan, Trailer, Pickup, Lorry, etc; Improve water resistant, shock and vibration proof.
- Easy to Connect: It comes with 2 wires (White is Negative/Black is Positive).
Our Best Choice: 4pc 2.5″ Amber Round Trailer LED Clearance Marker Lights [DOT FMVSS 108] [SAE P2] [Reflector Lens] [Grommet] [Flush-Mount] [Waterproof IP67] Marker Clearance Lights for Trailer Truck
“For us, the quality of support a customer receives before, during, and after a sale is just as important as the quality of the products we provide.”
GIVE YOUR TRAILER WHAT IT DESERVES
Trailers are how we work and how we play. And for those who hauls, there are just too many things to do before a long drive to waste time worrying about your trailer’s clearance lights. But if you’re using short-lived incandescent bulbs, you could be making a trip to the parts store to fix your lights before you can hit the road. With a long-lasting set of LED clearance lights, you’ll spend less time maintaining and more time doing what you love.
DOT FMVSS-108 Compliant
IP 67 Waterproof
90 Degree Plug and New Grommet
TOP Marking for Easy Orientation
No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflex reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.
Some other side marker light companies employ only one or two LEDs in their lights, but our side markers pack in 13 individual LEDs to maximize visibility and safety.
BETTER THAN THE REST
Our lights are sonically sealed and IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.
Available in amber and red with new grommets included, these lights are an excellent choice for the front, back, and sides of your vehicle.
WE DON’T SETTLE FOR SECOND BEST
Not all clearance lights are created equal. Many manufacturers are happy to equip their lights with only one or two LEDs, but our lights are outfitted with 13 attention-getting LED lights for improved visibility and safety. And with an IP67 waterproof rating, these lights are better suited to a wide range of applications including boat and jet ski trailers.
MORE THAN JUST AN LED LIGHT
More than just practical and long-lasting, our lights are also legal. According to the FMVSS-108, all trucks and trailers over 80” wide and with a GVWR of over 10,000 lbs must use clearance lights and reflective materials to legally operate on the road. Our lights combine the features and benefits of an LED side marker with a highly visible reflectorized lens so you can quickly and easily satisfy both requirements with one piece of equipment.
Details & Specs
L1: 3-3/4″, H1: 3-3/4″, W1: 1-9/16″, W2: 15/16″
LED Type: 0603 SMD, Light Color: Amber, LED Wattage: 0.52, Number of LEDs: 13.00
Operating Voltage: 8-16V DC, Amperage: 0.09, Power Output (Watt): 1.09
Connector Type: Pigtail, Lens Cover Color: Amber, Lens Cover Material: Plastic
Mounting Type: Flush-Mount, Mounting Hardware: Grommet, Wire Length (In): 6.00
Housing Material: Plastic, Certifications: DOT SAE, IP Rating: IP67
Package & Dimension: Length (In): 3.75, Width (In): 1.00, Height (In): 3.75
(4) 2.5″ 13-LED Round Clearance Side Marker – Amber
(1) 2.5″ Round Side Marker
(1) 2-Pin Connector
(1) 2.5″ Round Rubber Grommet
(1) Instruction Manual
ULTRA REFLECTIVE POLYCARBONATE LENS – The amber 2.5″ round LED side marker uses a specially designed polycarbonate lens to reflect back direct light, allowing your tractor or trailer to be more visible at night and providing a safer driving experience for you and other drivers on the road. The round LED side marker also comes with a “TOP” orientation, designed to allow you to uniformly install multiple units, while maximizing the amount of reflectiveness from each lens.
2 IN 1 FUNCTIONALITY – Driving a tractor, trailer, truck, or any other large vehicle mandates that you drive with side marker lights and reflectors depending on the size of your vehicle. The LED clearance light comes with 13 high powered LEDs, allowing it to serve as both a reflector and clearance light that federal law requires for larger trailers. This LED clearance light is also D.O.T FMVSS-108 compliant.
WATERPROOF, SUBMERSION READY – The waterproof IP67 rated LED side markers are fully capable of being submersible. This makes the clearance light ideal for boat trailers that launch and pick up watercraft into the water.
EASY INSTALLATION – The OLS amber clearance light comes with a rubber grommet so you never have to mess around with screws. Simply use a preexisting hole, or create a new cut out for the grommet, and use the industry standard two prong plug to light up the night.
HIGH QUALITY COMPONENTS – Each amber 2.5″ round LED clearance light uses high quality components made in Taiwan, and is reverse polarity protected, meaning that plugging it in the wrong way will not damage the unit itself. The amber clearance light has been certified safe by the D.O.T. and comes with D.O.T. SAE certification printed directly on the unit itself.