When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
Top 10 Best 1 4 to 1 8 compressor adapter in 2023 Comparison Table
- Master Airbrush Brand Airbrush Fitting Conversion Adapter for compressors, airbrushes, hoses, hose splitters and manifolds
- Airbrush Fitting Connector Adapter Bushing: 1/4" BSP Female to 1/8" BSP Male
- Screw the adapters 1/4" BSP female thread side onto a 1/4" BSP male fitting to convert it to a 1/8" BSP male size thread that is most common for compressors, airbrushes and hoses
- The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata
- SIZE - 1/4 NPT to 1/8 NPT male brass hex nipples. PLEASE NOTE, NPT Taper Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
- MATERIAL - Premium solid brass nipple, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces brass hex nipple adapters.
- FUNCTION - Used to connect female pipes with different diameters, or extending the pipe length. Apply to plumbing connections, compressed air, hydraulic, refrigeration, instrumentation, gas and other applications, hex nipples for easy tightening and loosening.
- Operating pressure: 1200 psi, Temperature range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
- NPT TAPER THREAD - The standard NPT taper threads allow the brass fittings better mesh with the object, strengthen the fixation to prevent leakage. The threads are smoother, the installation is easier and faster.
- 1/4" Female NPT x 1/8" Male NPT Adapter
- 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)Temperature range of -65°F to 250°F (-53°C to 121°C)Temperature range of -65°F to 250°F (-53°C to 121°C)
- PLEASE NOTE, 1/8" NPT MEASURES 0.405" OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- Backed by EDGE Industrial full manufacturers warranty
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
- Reducing adapter allows for connecting and extending different size pipes or fittings, can be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools
- 1/8" Male National Pipe Taper (NPT) threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- Heavy Duty RV and Camper Winterizing Blowout Plug Quick Connect Air Compressor Easy Grip Commercial Grade Quick Connect Brass Fitting to Winterize Boats Motorhomes Travel Trailers Garden Hoses
- 1/4" Quick Connect Air Compressors in North America. 3/4 GHT Female (Garden Hose Threading). Heavy Duty Winterize Sprinkler Systems Blowout Lines Air Compressor Quick Connect 1/4" Adapter Fits Garden Hose 3/4" Threading, Easily Blowout Water Lines Faucets Hoses ,Winterize with Ease
- Easily connects to air compressor and garden faucet to winterize lawn sprinkler systems, drip irrigation system, soaker hoses, faucets, and plumbing to prevent damage due to freezing.
- Prevent Damage to your water lines by using air to clear your water lines. Save yourself the headaches in the spring when you are ready to hit the road again.
- This heavy duty winterization tool is machined from a solid lead-free brass casting. This blow out plug may also be used to winterize sprinkler systems, drip irrigation systems, soaker hoses, faucets, pipes, spigots, sillcocks, water garden hoses, waterlines, and hose bibbs where applicable.
- 【MATERIAL】: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female pipe, 2-Piece
- 【DURABLE Design】: brass construction for corrosion resistance, high temperature ductility, not easy to be broken, Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- 【Style】: Precisely milled, threads are tighter, deeper, smoother than regular products, making work easier and more efficient. Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance
- 【Purpose and FUNCTION】: Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. It can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools, has a wide range of uses
- 3/4" Male NPT x 1/2" Female NPT Reducing Hex Bushing
- 1000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- PLEASE NOTE, 3/4" NPT MEASURES 1.050", 1/2" NPT MEASURES 0.840" OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- Backed by EDGE Industrial full manufacturers warranty
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
- Master Airbrush Brand Airbrush Fitting Conversion Adapter For Compressors, Airbrushes, Hoses, Hose Splitters and Manifolds
- Airbrush Fitting Connector Adapter: 1/4" Bsp Male To 1/8" Bsp Female
- Screw The Adapters 1/4" Bsp Male Thread Side Into A 1/4" Bsp Female Fitting To Convert It To A 1/8" Bsp Female Size Thread That Is Most Common For Compressors, Airbrushes and Hoses
- The Adapters 1/8" Bsp Hose Thread Size Is The Most Common Hose Fitting Size Used For Many Popular Airbrush Brands Like Master and Iwata
- Details of package: there are 7 pieces different types of 1/8 inch and 1/4 inch male and female connectors, 2 pieces quick disconnect connectors (adjustable pressure), and 6 pieces 1/8 inch male connectors, which constitute a well matched combination for daily use
- Metal material: these airbrush adapter kits are made of quality metal material, which feature sturdy construction and long lasting performance, they are not easy to break or deform, rust-proof and show metallic luster on the surface, are easy to store or carry
- Designed for: the adapter attachment is designed for spray gun, air hose and compressor, when you need to use it for multiple spray guns, there is no need to release the air pressure, so you can quickly replace the spray guns
- Simply designed: our airbrush adapter kit is a simply designed spray gun connector for connecting the air hose to the spray gun, which is easy to use and install, can save you much time and energy when using
- Compatible with: these spray gun quick disconnect kits are compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex spray guns and most Chinese spray guns, please check the information before purchasing
- Please Note Before You Buy This:this is only an inflator hose adapter, was designed to convert screw-on(twist-on) air chuck to lock-on air chuck, not for connecting to tire inflator/pump directly, please refer to the left second&third product image.Hose end thread is standard us fine thread connection(0.305"x32TPI), the same as the thread on all USA standard car valve stems, compatible with screw-on(twist-on) air chuck's inner thread.
- Premium Tire Inflator Hose Adapter, designed for tire inflator hose converting, easily convert tire inflator's twist-on connection to lock-on connection. Screw adapter end onto original inflator hose, press to clamp adapter head onto tire valve, start the inflator for a quickly and none leaking inflation.
- Excellent tight seal lock-on tire chuck, make sure no annoying leaking. High quality strengthen nylon-wrapped rubber hose, durable and flexible.
- All metal construction air chuck, portable tire inflator chuck adapter, for bike, motorcycle, car air fill. Open flow 90 degree thumb-press air chuck, easy and quick hands-free inflation.
- Buy with confidence,100% satisfaction customer service. Use under 200psi,heavy truck/vehicle forbidden.
Our Best Choice: Boeray 1/4 Inch NPT Male Thread to 1/8 Inch NPT Female Thread Brass Pipe Fitting, Reducing Hex Head Hose Bushing Adapter Convert Pack of 2
[ad_1]
Solution Description
Essential Aspect
Very clear Thread
More innovative creation system makes sure the clarity of the thread.Clear threads are much better at stopping leaks.
Extra Thick
The wall is thick ample to preserve the fitting from breaking at -65 to 250 levels Fahrenheit.
Heavier Weight
Heavier body weight with prime grade brass materials makes our item a lot much better. Greater corrosion resistance than steels.
Measurement
3/8″ Male to 1/8″ Woman
3/8″ Male to 1/4″ Female
1/2″ Male to 1/8″ Female
1/2″ Male to 1/4″ Female
1/2″ Male to 3/8″ Woman
Amount
pack of 2
pack of 2
pack of 2
pack of 2
pack of 2
Normal
NPT
NPT
NPT
NPT
NPT
Materials
brass
brass
brass
brass
brass
Boeray Components
Boeray Equipment, which is a expert seller for all types of brass fitting.
size: 1/4″ NPT male x 1/8″ Female pack qty: 2pcs
Meet up with NPTF necessity of US, greater than NPT thread, could be utilised as NPT thread, as well
Fantastic raw materials brass, large corrosion resistance, very low magnetic attributes and high temperature ductility
Meet up with ASTM B584 and ASME/ANSI B16, some elements have DOT certification
Immediate company gross sales so bulk orders are suitable with great price and brief guide time
Leave a Reply