When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best 3 ft compressor hose in 2022 Comparison Table
SaleBestseller No. 1
Goodyear 3' x 3/8" Rubber Whip Hose Yellow 250 Psi
- Solid Brass End Fittings: 1/4-Inch MNPT
- Spiral Synthetic Yarn Reinforcement
- Abrasion-Resistant Rubber Outer Jacket
- 100% Made and Assembled in the USA
- 10 Year Guarantee
Bestseller No. 2
Rapidair F0215 Compressor Jumper Hose, 3/4 x 3-Feet
- 3/4" NPT Male x Female Swivel Brass fittings
- 3 ft. Length
- 200 psi rated
Bestseller No. 3
TEKTON 3/8 Inch I.D. x 3 Foot Hybrid Lead-In Air Hose (300 PSI) | 46132
- Makes a flexible connection from rigid supply line to hose reel to isolate vibrations
- Stays flexible and easy to work with, even in the cold
- Slides over rough surfaces without abrasion
- Lightweight, low friction hybrid polymer resists kinking and tangling
- Solid brass connectors never corrode and seal better than aluminum, steel, or zinc
Bestseller No. 4
WYNNsky Hybrid Lead in Air Hose 3/8" X 30"(1/4 in. MNPT Ball Swivel x 1/4 in. FNPT Ends) 300 PSI Max Working Pressure, Heavy Duty Air Compressor Hose
- Rubber/PVC blend construction offers the best of both material, lightweight than rubber air hose, more flexible than PVC.
- Max. working pressure is 300 PSI
- 1/4" MNPT Ball Swivel x 1/4" FNPT Ends.
- 3/8" x 30" Hybrid Air Hose, with 2 years limited warranty.
- Solid brass connectors never corrode and seal better than aluminum, steel, or zinc.
Bestseller No. 5
Milton 2780-3LH x 3' Leader Hose, 1/2" NPT, 0
- CONNECT: Rigid air piping to other devices (such as hose reels, air compressors, and more).
- 3’ EPDM Performance Hose: Stays flexible in cold conditions. Resists cracks, abrasions & chemicals.
- EASY INSTALLATION OR HIGH FLOW APPLICATION: with less system noise/vibration than hard connections.
- FITTINGS: 1/2" NPT male; 1/2" NPT female. Solid brass, corrosion-resistant.
- LEADER HOSE: Rated to 300 Max PSI, nylon-braid reinforced. 1/2" ID.
SaleBestseller No. 6
Milton 2760-3LH Air Leader Hose, 3/8" x 3 ft. Rubber Hose - 1/4" NPT Brass Ends - 300 Max PSI
- 3’ EPDM Performance Hose: Stays flexible in cold conditions. Resists cracks, abrasions & chemicals.
- EASY INSTALLATION OR HIGH FLOW APPLICATION: with less system noise/vibration than hard connections.
- FITTINGS: 1/4" NPT male; 1/4" NPT female. Solid brass, corrosion-resistant.
- Item Package Dimension: 9.75" L x 5.75" W x 0.375" H
Bestseller No. 7
WYNNsky Rubber Lead-in Air Hose, 3/8" X 30" (1/4 in. MNPT Ball Swivel x 1/4 in. FNPT Ends), 300 PSI, Red Heavy Duty Air Compressor Lead- in Hose
- 1/4 in. MNPT Ball Swivel x 1/4 in. FNPT Ends
- Max. working pressure is 300 PSI
- Flexible rubber stays soft and easy to work with even extreme cold weather
- 3/8" x 30 inch rubber lead-in air hose, with 1 years limited warranty
- Solid brass end fittings never corrode and seal better than aluminum, steel, or zinc
Bestseller No. 8
18-inch Short Air Compressor Hose: 1/4" Male NPT To 1/4" Male NPT Connections (Lead-Free Brass)
- Approximately 18 inches long only. Length is distance between the ends of the 1/4" Male NPT connectors. The end connectors are non-swivel and non-rotating. Perfect for use as a lead-in or leader hose to reduce stress or vibration normally associated with rigid piping.
- Note that the outer diameter of a 1/4" male NPT fitting is actually 0.54 inch. So, its outer diameter is about 0.29 inch larger than its “name.” NPT fittings are slightly tapered so the 0.54 inch diameter is the diameter in the middle of the threaded portion. PLEASE CHECK THE SIZE OF YOUR CONNECTION BEFORE PURCHASING.
- 100% outdoor rated, virtually indestructible, impervious to water and oil.
- All metal parts are solid lead-free brass, certified to contain less than 0.25% lead. Hose is Insta-Grip, 3/8" nominal diameter, more pliable and kink-resistant than other air hoses, made in USA.
- Suitable for use as an air compressor hose (compressed air hose), water hose, and hydraulic hose up to 250 psi. Always wear eye protection when handling compressed gases or fluids.
Bestseller No. 9
TEKTON 3/8 Inch I.D. x 3 Foot Rubber Lead-In Air Hose (250 PSI) | 46332
- Makes a flexible connection from rigid supply line to hose reel to isolate vibrations
- Flexible rubber stays soft and easy to work with even at -40 degrees F
- Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F
- Solid brass connectors never corrode and seal better than aluminum, steel, or zinc
Bestseller No. 10
Red Rubber Hose Whip 3' Long 1/4" I.D. with 1/4" Male Ball Swivel
- Red Rubber Hose Whip
- 3' Long 1/4" I.D. Hose
- 1/4" Male NPT Ball Swivel on One End
- 1/4" Male NPT End Plug on Other
- 300 PSI Service Pressure 1200 PSI Burst Pressure
Our Best Choice: Flexzilla Ball Swivel Whip Air Hose, 3/8 in. x 4 ft. (1/4 in. MNPT Ball Swivel x 1/4 in. FNPT Ends), Heavy Duty, Lightweight, Hybrid, ZillaGreen – HFZ3804YW2B
Our rating: (4.4 / 5)
(4.4 / 5)[ad_1] Flexzilla Air Hoses provide remarkable flexibility for restricted radius bends in both equally cold and heat environments. Engineered polymer-blend material permits use in environments the place generalpurpose PVC and rubber hoses may well develop into also rigid. Attributes of ZillaWhip hoses boost longevity of the most important hose, lessens user exhaustion by eradicating pounds of a few/plug, enhances air resource ergonomics and the ball swivel increases mobility in limited areas.
Really versatile – All temperature overall flexibility (-40 Levels to 140 Levels F)
Exceptionally durable – Abrasion resistant outer go over with bend restrictor at hose ends
Is not going to kink beneath force – Hybrid polymer coils quickly and lays flat with zero memory
Tilt and swivel action – 30 diploma tilt and 360 diploma swivel action ball increases mobility in limited workspaces
Versatility – Use on expert jobsites, in automotive retailers or at house in the garage
Leave a Reply