When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best 3 hp compressor motor in 2021 Comparison Table
- Frame: 56H
- Output: 3 HP
- Number of Poles: 2
- Frequency: 60 Hz
- Rated Speed: 3480 RPM
- Phase and Voltage: AC motor horsepower: 3HP;Voltage: 115/230 V;Model:CM03256
- RPM: Matching up the RPM is quite important. The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood. Example: 3510rpm, 3550rpm, 3450rpm are all the same. They are all fall under the umbrella of whats known as 3600RPM motors.
- Powerful AC Motor: Compact and small sized AC motor featuring output 3HP, 56 Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading.
- Totally Enclosed Fan: Big fan at one end cools the motor in hours' running, even in dusty or damp environments. Reducing energy costs or overheads, reducing running temperature, increasing winding lifetimes.
- High Speed 3450RPM: The AC motor designed with rated speed: 3450RPM to be with high working efficiency. Runs with 3 HP. Shaft Diameter: 5/8" (1.6cm), Shaft Length: 1.88" (4.8cm).
- 3 HP - 1 PHASE - 56 FRAME - 3450 RPM - 230VAC - 5/8" SHAFT
- 1 PHASE, 56 FRAME, 3450 RPM, 230VAC, 5/8" SHAFT DIAMETER
- CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR
- Amperage (15 FLA AT 230V), Voltage: 230V (NOT SUITED FOR 208V INCOMING)
- CCW (COUNTER CLOCKWISE ROTATION) WHEN VIEWED FROM SHAFT END.
- 3 HP SPL
- 3450 RPM
- 56 Frame
- Shaft: 5/8" x 1-7/8" with Keyway
- 15.0/7.5 amps
- SQUARE D DEFINITE PURPOSE MAGNETIC STARTER WITH 3 THERMAL OVERLOADS / HEATER ELEMENTS
- 10HP 3-PHASE 208-240VOLT, 40AMP CONTACTOR, NEMA 1 GENERAL PURPOSE ENCLOSURE
- SPECIFICALLY DESIGNED TO BE USED WITH 10HP 3-PHASE 208-240VOLT ELECTRIC MOTORS
- PREOFESSIONAL INSTALLATION REQUIRED
- MSL-18MAX SCHULZ INDUSTRIAL GRADE SINGLE STAGE AIR COMPRESSOR PUMP FOR 2HP, 3HP, 4HP AND 5HP APPLICATIONS
- 12 MONTH WARRANTY, PUMP SPECIFICALLY DESIGNED FOR 2HP - 5HP 56FRAME ELECTRIC MOTORS RATED BETWEEN 15-20 AMPS, FREE IN-TAKE FILTER INCLUDED
- 18 CFM DISPLACEMENT MAX, 42 LB CAST IRON 2 CYLINDER PUMP, MAXIMUM PRESSURE 125 PSI
- MANUFACTURERS SUGGESTED RPM 1190, PUMP FLYWHEEL 11.5" OUTSIDE DIAMETER SINGLE GROOVE FOR ONE BELT, 1/2" TOP WIDTH A/4L SECTION BELT. BELT NOT INCLUDED
- PLEASE READ DESCRIPTION FOR FULL DETAILS, DIMENSIONAL DATA CAN BE VIEWED ON ATTACHED PICS
- Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
- Folding handle with low profile design for easy storage with handle folded
- Price For: Each Item: Hard Start Kit Application: For Use on Residential and Commercial Air Conditioning Units, Heat Pumps and Room Air Conditioners, Provide Additional Starting Torque to all Single Phase 115 thru 288 Volt Units Includes: Lead Wires, Electronic Potential Relay (EPR), 330 V Capacitor Type: Relay and Start Capacitor Voltage: 90-277 HP: 1/2 to 10 Increased Torque (Oz.-In.): 300
- Country of Origin (subject to change): China
- Price For: Each Body Dia.: 3.3" Motor Shaft Design: Flat Mounting Pattern: 2-7/8 x 2-7/8 Motor Service Factor: 1.00 Motor Shaft Rotation: CWSE Frame: 3.3 Motor Bearings: Sleeve Stud/Base Mtg. Pattern: 2-7/8 x 2-7/8" Phase: 1 Ins. Class: B Mounting Stud Location: 4/Both Ends Motor Mounting Type: Stud Max. Ambient Temp.: 40 Degrees C
- Motor Sub Application: Direct Dr Fan/Blower Application: HVAC/R Motor Application: HVAC/R Motor Enclosure Design: Open Dripproof Item: HVAC Motor HP: 1/50 Motor Thermal Protection: Auto Motor Design: Shaded Pole Shaft Dia.: 1/4" Duty: Continuous RPM Range: 1801-3000 Voltage Compatibility: 115, 120, 115/208-230, 115/230, 120/240 No. of Speeds: 1 Length Less Shaft: 2-1/2" Voltage: 115
- Shaft Length: 2" Hz: 60 Nameplate RPM: 3000 Full Load Amps: 0.92 Country of Origin (subject to change): Mexico
- This listing is for a brand new WEG 7.5 horsepower air compressor motor model number 00718OS1CCD215T, this motor is 208-230 volt Same as L1510T
- 3.00-31.40 AMPS, 60 Hz, 215TFrame, single phase, 1-3/8" diameter shaft, and 1760 RPM. This motor is specifically designed for use with air compressors to meet start up load / torque specifications.
- This can replace a higher rpm motor, you will just have to use a larger pulley to make up the RPMs on your compressor.
- This motor has a 1 year limited manufacturer's warranty and also a 30 day warranty directly through Industrial Equipment Expert
Our Best Choice: 3 HP 3450 RPM Single Phase 56 Frame 230V 15 Amp 5/8″ Shaft NEMA Compressor motor
[ad_1] Features: Diminished starting off amperage style and design to ensure the minimized voltage starting off at rated load. Outfitted with UL accepted Handbook thermal overload, capacitors and significant excellent ball bearings to assure the life time. Open up dripproof is far better used in surroundings that are relatively cleanse and dry environments. Unique design and style for Air Compressor obligation. Motor is Non-Reversible CCW (Counter Clockwise) ONLY. “Warning The package is more than 39lbs and Fragile. Offer have to have tackle with treatment. For thoughts with motor is not going to start or any difficulty with wiring established up, be sure to speak to with your seller to resolved your issue very first and also RETURN Choices”
Solitary section Total Load amps: 15Amp, 230V
3 HP 3450 RPM
Body Sort: 56, 5/8″ Keyed shaft, Shaft duration:2 1/2″
NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY