When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best 8 gallon husky air compressor air filter in 2022 Comparison Table
- Replacement Part # HL018200AV
- 2.40" Overall Dia. 1/2" NPT mounting threads
- NPT or National Pipe Thread is measured by the inside diameter of pipe , not the outside of the threads.
- For: Campbell Hausfeld , Husky, Sears and others.
- Suitable for oil-less air compressor
- Size : 76mmx60mm,Male Thread Diameter: 20mm,Male Thread Size: 1/2 inch
- Pacakge included : 2 Pcs 1/2"PT 20mm Air Compressor Silencer Filter
- Widely Used on admitting port of the air compressor can effectively block the dust in the air moisture to reduce the noise at work.Silencer Filter can be used in noisy equipment, such as blowers, air compressors, boilers, exhaust port, generators, pumps and exhaust ports.
- If there is any quality problem, feel free to contact us and we will give you a 100% refund within 2 years of purchase. It is our intention to offer the best customer service on Amazon.If you are looking for replacement filter elements only, our new products(4 Packs Air Compressor Filter Elements) will certainly be the best choice. You can find it by browsing another listing from our store.
- FUNCTION: This Air Filter can reduce the filter noise at work. When operating the air filter, you can use this Air Filter to reduce the noise without affecting the surroundings.
- APPLICABILITY: This Air Filter is suitable for oil-free air filters, which can isolate moisture in the air and improve the efficiency and life of the filter.
- SPECIFICATIONS: This Air Filter is light in weight, about 100 grams, the thread type is 1/2", the thread is clear, and the operation is simple.
- SIZE: The size of this Air Filter is about 50 x 50 x 20 mm/2 x 2 x 0.8 inches, compact size and excellent performance.
- INSTALLATION: This Air Filter is easy to install and is an excellent air filter accessory, which can be installed directly on the air inlet.
- BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The filter element is brass that provide higher efficient filtration and long lifetime than the fiber one.
- PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure.
- GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and mpa. The Max pressure is 150 PSI. The filter cup is designed to be transparent for observing the volume of water and oil.
- EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control. Some necessaries are also included in this kit: a double MNPT fitting and a thread seal tape.
- PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
- Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor
- Product dimensions – 26" L x 14" W x 23” H | Max Pressure – 120 PSI | Voltage – 110V / 60 Hz | Min running watts – 2500 | Noise level – 60 dBA | Max Continuous run time – 30-60 min (depending on PSI & CFM) | Low Amp Draw – 8.5 Amps
- Oil-Free Pump for Less Maintenance & Costs | Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor
- The large 8.0 Gallon Steel Air Tank is Lightweight (48 lbs) and the wheel kit makes it very easy to transport
- The Oil-Free pump allows for use in a variety of temperatures and uneven terrains | This air compressor is ideal for anyone working inside where noise is a major issue
- Item Name : Silencer Filter;For : Air Compressor
- Male Thread Diameter : 20mm;Male Thread Size : 1/2"PT
- Material : Metal, Plastic;Color : Black
- Pacakge Content : 1 x Silencer Filter
- Used widely on the admitting port of air compressors, can greatly reduce the noise of air intake.
- Max Supply Pressure: 250 PSI, Max Operating Pressure: 140 PSI, 16 SCFM @ 90PSI
- Particulate Filter: 5 Micron Element, Coalescing Filter: 0.3 Micron Element, Port Size:1/4" NPT
- Manual Drain & Poly Bowl with Guard, Includes 0-140 PSI Embedded Pressure Gauge
- Use metal bowl in pressure exceeding 150PSI or when solvents harmful to polycarbonate is present
- Manufactured in Korea
- Air Compressor Air Intake Filter Kit.
- Part # D24235
- Includes D24233 Foam Filter & CAC-1373 Retaining Ring.
- Fits Many: Annovi Reverberi-AR, Westward, Bostitch, Black & Decker, Craftsman, Sears, Devilbiss Air Power, DeWalt, Emglo, Excell, Porter Cable, Speedaire
- ➦[Durable] -Air compressor intake filter element is made of a heavy duty paper material and can be used in noisy equipment, such as blowers, air compressors, boilers, exhaust port, generators, pumps and exhaust ports.
- ➦[100%Filtration Efficiency] – This air compressor filter element has a 100% filtration efficiency. This is for most common compressor (midsize to large compressors) air cleaner size and work the same as the original filter.
- ➦[4 Pack with Great Price] - A s a gift from us to your Thanksgiving Day and Christmas, the 4 pack of air compressor filter element will cost less than just one from your dealer.
- ➦[Ideal Accessories for Air Compressors] - Air compressor filter element is quite easy to install, able to reduce the compressor noise at work, fits craftsman, porter cable, and air compressor models.
- ➦[Customer Service] - Described accurately and shipped promptly and our customer services will always be available whenever you need us.
- Five Brand new #14 also known as the A424 air intake filter elements.
- This filter has a 99% filtration efficiency.
- These are a heavy duty paper elements surrounded by a galvanized mesh screen.
- 3" Inside Diameter - 4 3/8" Outside diameter - 2 5/16" Tall 35 scfm flowrate
Our Best Choice: 2 Pack VF4000 Replacement Filter Compatible with 5-20 Gallon Ridgid Shop Vac Wet Dry Vacuums and 6-9 Gallon Husky Vacuum Cleaners
❤VF4000 filter matches for Ridgid 5-20 gallon vacuums, Husky 6-9 gallon vacs and CRAFTSMAN vacuums created right after 1988(Component #17816 #9-17816)
❤Compatible with Ridgid types: WD5500, WD0671, WD6425, WD0970, WD7000, WD1270, WD1280, WD1450, WD1851, WD1680, WD1956, 6000RV, 1000RV, 1200RV, 1250RV, 3410RV, RV2400A, 1400RV, RV2400HF, RV2600B, 1650RV, 1620RV, 1610RV
❤Package is made up of 2 pack VF4000/VF4200 vacuum filters.
❤Captures sawdust, fantastic dust, wooden chips and day to day dirt devoid of clogging, hold your dwelling clear!
❤Replace and set up with out any applications. Change the filter every single 3 months for ideal suction.