When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated air compressor piston rebuild kit in 2022 Comparison Table
- Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: “Suspension error only normal height available” “Suspension fault; pressure not rising quick enough” Or “Pressure does not decrease when venting gallery”? VEHICLES AFFECTED: Discovery MK 3 (LR3) 2005-2009 Discovery MK 4 (LR4) 2010-2012 Range Rover Sport 2005-2013 Range Rover L322 2006-2009
- THE SOLUTION: Fit our improved design dryer end cap, piston seal, glide seal and filter kit and restore your compressor to full health. Our complete kit includes all needed to restore your compressor to full health. Our kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore full output. Also included is two custom tools to allow easy replacement of these seals.
- Full filter replacement kit to allow you to replace all filters and drying beads within the drier unit, the original filters saturate quickly and drastically effect output, our improved replacements will solve this problem. This kit includes a new improved design dyer end cap, re-designed and engineered to not fail again. A simple straight swap for the old dryer end cap. Made from billet aluminium with a Viton seal to provide a perfect long lasting seal with the dryer canister.
- Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? Vehicle stuck at Level 1. Failing to progress through Levels 2,3,4. Suspension error light showing. Yellow suspension error light lit?
- VEHICLES AFFECTED: BMW X5, E53 2000-2006 Associated part numbers, our kit will only repair Wabco compressors. Official Air Supply Unit: 6779712, 6753862, 6787617, 1092349 Wabco: 415 403 304 0, 415 403 109 0
- THE CAUSE: The piston ring within your vehicles EAS air compressor is worn reducing output significantly. The poor quality piston ring within your air suspensions compressor wears over time causing these symptoms. The piston ring within the compressor unit of your air suspension system deteriorates over time, the OEM piston ring is made from a soft plastic that wears quickly, this wear substantially reduces the output of your compressor leading to noisy, slow rising or non-rising suspension.
- THE SOLUTION: Fit our improved design PTFE piston ring and restore your compressor to full health! Simply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
- Viair 380C Compressors Connecting Rod / Piston, Cylinder Wall / Head Rebuild Kit
- Includes: Piston Assembly w/ Seal, Connecting Rod, Sealed Bearings w/ Counter Weights
- Cylinder Wall Kit w/ O Rings, Cylinder Wall Head, Gasket and Head Bolts
- Instructions - FOLLOW CAREFULLY OR HAVE A PROFESSIONAL DO IT
- NO WARRANTY ON REBUILD KITS OR PARTS
- Viair 380C Compressors Connecting Rod / Piston, Cylinder Wall Rebuild Kit
- Includes: Piston Assembly w/ Seal, Connecting Rod, Sealed Bearings w/ Counter Weights
- Cylinder Wall Kit w/ O Rings
- Instructions - FOLLOW CAREFULLY OR HAVE A PROFESSIONAL DO IT
- NO WARRANTY ON REBUILD KITS OR PARTS
- Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: “Suspension error only normal height available” “Suspension fault; pressure not rising quick enough” Or “Pressure does not decrease when venting gallery”?
- THE SOLUTION: Fit our replacement piston seals and restore your compressor to full health. Please note this listing is for our piston seal kit only, please check out our store for filter kits. This kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore output
- VEHICLES AFFECTED: Discovery MK 3 (LR3) 2005-2009, Discovery MK 4 (LR4) 2010-2012, Range Rover Sport 2005-2013, Range Rover L322 2006-2009, Associated part numbers, our kit will only repair Hitachi compressor. RQG000017 RQG000018 RQG000019 RQL500040 RQG500060 RQG500061 RQG500062 RQG500070 RQG500071 RQG500072 RQG500080 RQG500090 RYG500160 LR023964 LR010376 LR045251 LR044360 LR01530 LR015303 UUB504700 VUB504700
- THE CAUSE: The piston seals within your vehicles EAS air compressor are worn and the filters saturated reducing output significantly. The likely cause of the faults noted above and most common cause is a worn piston and glide ring within the air suspensions compressor unit. Coupled with saturation of the filters in the compressors drier unit. This results in reduction of compressor output and triggers vehicle faults as well as extending the time taken to lift the vehicle.
- Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: “Suspension error only normal height available” “Suspension fault; pressure not rising quick enough” Or “Pressure does not decrease when venting gallery”?
- THE SOLUTION: Fit our improved design piston ring, glide ring and filter kit and restore your compressor to full health. Our complete kit includes all needed to restore your compressor to full health. Our kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore full output. Also included is two custom tools to allow easy replacement of these seals.
- Full filter replacement kit to allow you to replace all filters and drying beads within the drier unit, the original filters saturate quickly and drastically effect output, our improved replacements will solve this problem. X2 air collet Viton o-rings, X2 piston liner Viton seals, X1 high temp Piston liner gasket no need to reuse the poor quality originals!
- X1 dryer to compressor Viton O-ring seal, X1 metal filter Viton seal, X1 dryer end cap Viton seal. Replace all dryer seals with our improved material Viton seals to cure present and prevent future leaks. PLEASE NOTE THIS IS REPAIR KIT FOR HITACHI BRAND AIR COMPRESSOR AND DRIER, NOT ACTUAL DRIER ASSY
- Viair 450C Compressors Connecting Rod / Piston / Cylinder Wall Rebuild Kit
- Includes: Piston Assembly w/ Seal, Connecting Rod, Sealed Bearings and Counter Weights
- Cylinder Wall Kit w/ O Rings, Head Cover, Gasket and Head Bolts. VERIFY PISTON STLYE - See Photo - NEW STYLE ONLY
- Instructions - FOLLOW CAREFULLY OR HAVE A PROFESSIONAL DO IT
- NO WARRANTY ON REBUILD KITS OR PARTS
- Compression ring kit for a compressor
- This part fits model number 165080
- Compression ring kit contains 5 parts
- 3.7-Inch long, 5-Inch wide, and 4.3-Inch high
- Package weight of this item is 1-Pound
- For Select Oil-less 2-3/8" Cylinder bore.Part # DAC-308 / CAC-248-2
- Fits Select: Dewalt DeVilbiss, Porter Cable, Makita, Sears, Ex-Cell, Black & Decker, Delta and others.
- Fits the following models with the replaceable piston ring (Partial List): KK-4835, KK-5081, A02743, K-0058 and K-0650
- Oil-Less or Oil-Free piston ring fits many air compressors including DeVilbiss, Porter Cable, Sears, DeWalt, Snap On, Ex-Cell, Air America, Charge Air Pro, Dayton, Makita, Grainger and many other private label air compressor brands.
- Oil-Free Air compression ring Piston Ring
- Part :CAC2482/ CAC-248-2
- Outside (OD): 2-9/16"Inside (ID): 1-7/8"
- Suitable for: Porter Cable ,Craftsman, DeVilbiss,Black and Decker etc many other private labelAir Compressor
Our Best Choice: JDLLONG NO38785 N021229 Air Compressor Repair Piston Kit Fits DeWALT D55146 D55167 D55168 Compressor Cylinder Kit
[ad_1] Kind: Air Compressor Fix Piston Package
Interchange Element#: N021229
Appropriate with:
For DeWALT as stick to models:
D55146 Sort 2, D55168 Variety 1, D55167 Kind 1, D55146 Kind 3, D55167 Sort 3, D55168 Form 3, D55149 (Form 4), D55168 (Type 4) 1.8 15G, D55168 (Variety 5) 1.8 15G
Deal Involves:
1 x Compressor Repair Piston Kit(as photograph)
Interchange Aspect Variety: N021229
Appropriate for DeWALT D55146 D55167 D55168
Remember to test section shots, part selection, aspect description above diligently to make certain it is what you want. if any concerns, remember to sense free to get in touch with us.
No installation recommendations, please check with a specialist to put in
No installation instructions, be sure to question a qualified to set up
Leave a Reply