When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated air compressor toilet paper filter in 2022 Comparison Table
- Pipe size is 1/4 NPT, Nominal airflow is 45 CFM, filtration rating is .01 micron and the maximum pressure is 125 psi
- Temperature range is 32-175 F, replacement Element is m-7231/4 and the has NPT connections on bottom
- Made in USA
- The ultimate defense against damaging dirty air by removing particulates, condensed moisture and oil aerosols down to .01 microns in size
- Unit will mount in spray booths, on plasma cutters or on other equipment requiring Ultra-clean air and a flexible connection
- Contains Motor Guard model M-30 filter, mounting bracket, hardware and 2 replacement elements
- Port size is 1/4 NPT, Nominal airflow is 45 CFM and the filtration rating is .01 micron
- Maximum pressure is 125 psi, Temperature range is 32-175 F and the replacement Element is m-723
- The wound Element in the Motor Guard filter traps contaminants and absorbs large quantities of moisture and oil
- Made in USA
- PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1
- 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer
- STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass.
- STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change.
- STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads.
- WHAT IS INFLATE-R? - Portable & lightweight Tire Pump - Fits conveniently in you're car's glove box or in a backpack.
- CAN BE USED FOR ANYTHING THAT HOLDS AIR - You can inflate Vehicle Tires, Footballs, Soccer Balls, Motorbikes, Mountain bikes, and all other inflatables. Comes with every type of Nozzle to fit on any inflatable equipment.
- POWERFUL AIR OUTPUT - This Air Pump provides up to 150 psi of air output, and inflates tires in under 8 minutes!
- EMERGENCY PUMP - Use Inflate-R when you need to inflate tires on the road or in emergencies.
- BUILT IN POWER BANK - Large 2000 mAh battery to charge phones or other electronic devices. This also makes for a long battery life when pumping.
- Standard 3/8-inch NPT desiccant air filter with 3/8-inch Female and Male inlet/outlet. Pressure range is between 90 to 150 PSI with recommended operating pressure of 90 PSI and 22 CFM.
- Reliably remove oil, dirt, moisture and water from the air line to ensure only clean air is used for quality results.
- Achieve moisture-free compressed air with Le Lematec ZN312E-3 air compressor water separator for optimal spray painting action and any dry air applications.
- Easy color change indicator as the desiccant beads turn from blue to pink when the filter needs replacing. Quickly change desiccant beads without needing any tools.
- Lightweight, durable and industrial-strength zinc material for shock-proof composition with bigger desiccant bowl capacity of 28g for extended operations.
- HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR PARTICULATE FILTER MOISTURE TRAP
- 250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET INCLUDED
- 5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE
- 5 MICRON FILTER ELEMENT REMOVES 95% MOISTURE, DEBRIS AND CONTAMINANTS
- 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"
- Air compressor dryer provides quick and easy cleaning with its push button drain valve. Just push the button to eject oil dirt and water from the filter.
- The inline air filter works between 90 PSI to 150 PSI, perfect as a plasma filter.
- LE Lematec air compressor filter oil and water separators are compatible with any air compressor and air tool. The air filter traps dirt oil and moisture as a receiving filter for air tools.
- Keep air tools in tip top working condition and prevent costly repairs by preventing dirt and moisture from damaging your air tools and accessories.
- LE Lematec air dryer is a heavy duty inline air filter. Made from aluminum and solid brass fittings, it offers excellent reliability. Complete with ¼ inch connection.
- BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The filter element is brass that provide higher efficient filtration and long lifetime than the fiber one.
- PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure.
- GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and mpa. The Max pressure is 150 PSI. The filter cup is designed to be transparent for observing the volume of water and oil.
- EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control. Some necessaries are also included in this kit: a double MNPT fitting and a thread seal tape.
- PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
- 【Multi-functional】 3 different adapters make it compatible for car bike motorcycle balls balloons and other inflatables. The pump has lighting function.
- 【Easy to Use】 BY4U electric air pump supports 4 optional units: PSI, BAR, kPa, Kg/cm². You can check the current tire pressure quickly and preset the tire pressure you need, it will automatically shut off once reaching the preset value.
- 【Built-in Lithium Battery】 Mini-body, Capacity with 2000mAh.(Attention: Please don't activate the pump when it is in charging)
- 【Mini】 The handheld electric tire pump measures 9.8 x 2.2 x 1.9 inches, weighs about 400g, and comes with a carry-on bag.
- 【Warranty】 1 year warranty.If you have any questions about the pump, you can contact us,quick reply in 24 hours.
- 1/4-Inch NPT
- Standard Filter - 5 Microns
- Manual drain
- 0.5-Ounce polycarbonate bowl with guard
- 49 CFM
Our Best Choice: Motorguard M-26 Compressed Air Filters, 1/4″ (NPT), Sub-Micronic, Plasma Machines (396-M-26)
[ad_1] Mount at level of use downstream of motor guard m-26/60 filter. removes oil vapor from air applying activated carbon. The supreme final filter for plasma cutters and other significant purposes.
Is Discontinued By Company : No
Merchandise model amount : 396-M-26
Day To start with Obtainable : September 11, 2009
Company : Motorguard
ASIN : B008C0QDVA
Country of Origin : United states of america
Mount at point of use downstream of motor guard m-26/60 filter
Eliminates oil vapor from air employing activated carbon
The Supreme remaining filter for plasma cutters and other significant purposes
Item Offer Pounds: 1. lb