When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated angle cutter in 2022 Comparison Table
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding applications
- AC/DC switch for use with alternative power source
- Tool base can be removed for cutting closer to walls; guide wheels on the tool guard for smooth traveling
- Built-in vacuum attachment port for efficient removal of dust and debris
- 【Widely Used】- Miter shear is designed for cutting hard material(thickness under 1/4 inch), such as trunking and PVC strips, molding, and weatherstrip. Note: this shear is not suitable for cutting metal, or soft material(such as cardboard, carpet or soft plastic board).
- 【Multi Angle】- 45 to 135 degrees, clean and tidy cut, no burrs. Large opening design, and with clear marks, the angle can be adjusted as needed to achieve simple and accurate operation.
- 【Premium Stainless Steel】- The stainless steel blade is quenched, which has higher impact toughness and wear resistance. It is not easy to break or fall off during use.
- 【Safety Lock】- The rotary lock is easy to close and open, safe and convenient, you don't need to worry about accidental scratching. It is comfortable to hold and suitable for long-term use.
- 【Replaceable Blades】- The miter shear kit includes 5 extra spare sharp and heavy duty replaceable blades. Please note that this miter shear cutter is not suitable for cutting metal or stainless steel.
- 📏【PRECISE SHAPE DUPLICATION】:Saker Contour Gauge designed for winding pipes, circular frames, ducts and many objects, Ideal for fitting tiles, laminate, carpet, checking dimensions, moulding, etc.Useful tool for operations on car bodies, carpentry and for all kinds of modelling.
- 📏【ADJUSTABLE AND LOCKING FEATURE】:Saker contour guage can adjust the tightness according to your needs. After using the contour ruler for a period of time, you can easily adjust the tightness;Once object has been contoured, lock contour gauge teeth in place for perfect traces every time.
- 📏【GOOD MATERIAL AND PORTABLE】:The contour gauge is made of high quality ABS plastic, high strength, rustproof and durable.
- 📏【ESAY TO USE】:Our contour gauge measures 5 inch&10inch ,can be used to measure the shape of irregular objects,instant template for marking precise tile cuts .You just press the contour gauge on one of the shapes.Trim outline and cut into shape.
- 📏【EXTENSIVE APPLICATION】:Contour gauge is used to locate profiles or edges and accurately transfer to the material to be cut.For any kind of work needs the contour duplication. In woodworking, auto body, auto metal sheet, stainless steel or any job of contour duplication.
- Wide Application --- This Multifunction Car Push Retainer Rivet Trim Clip Pry Puller is great for most models: Honda, BMW, Mercedes, Nissan, Toyota, Chevy, GMC, Ford, Dodge ects. You can use it to pull car door trim clips, cutting seals buckles with various sizes.
- High Quality --- Made from Carbon Steel, it is anti-corrsion and non-rust, very sharp and durable!
- Size --- Length: 17.5cm / 7 inches around; Weight :170g / 0.37IB. It is lightweight to use and carrying!
- Scientific Design --- It is designed with a ergonomic handle, which is comfotable for long time use! Besides, there is a special spring on the plier, which will save your labor and make your work easier!
- 100% Satisfaction Assurance --- If you have any problem with our products, please feel free to contact me! We will provide you FULL REFUND & FREE REPLACEMENT & QUICK RESPONSE services!!!
- ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
- HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
- ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
- TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
- REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
- Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
- 21-degree
- 2.5mm heat-treated carbon steel construction provides durability and long life
- Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
- Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Rubber shield helps keep debris away from operator and from entering the motor
- Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding applications
- Removable base for a closer edge-to-edge cut
- Rubberized handle for increased comfort
- [Ensure Flush Cuts]: Whether cutting wires or trimming sprues from toy models, the ABN Flush Wire Snips Small Wire Clippers will create clean, precise cuts; Prevent stray strands that can cause potential harm to your installation projects
- [Flat Blade Design]: Diagonal cutter flush side cutters has flat 1-inch (2.5cm) long zip tie cutter tool blade that provides flush cuts on up to 12-gauge copper and soft wires; 2.5mm hole allows for easy insulation trimming
- [Finish Your Project]: Flat edge trims plastic and metal pieces from your models and circuit boards; Electronics side cutter to be used as jewelry wire flush cutter, wire cutters electrical nippers, craft wire cutters, sprue cutter, floral wire cutter
- [Trusted Quality]: Spring-loaded wire snippers cut quickly and cleanly and open automatically, while durable forged steel construction ensures maximum strength; 6.8-inch (17.3cm) total length
- [Anti-Slip Grip]: 4-inch (10.2cm) long rubberized handles provide a secure, comfortable grip for convenience and optimal operation of this wire clipper
- Designed to cuts tile trim, PVC piping, quarter round, tack strip and other light materials.
- Suitable for cutting PVC PPR PE plastic pipe, timber strips, wire, ect. Can't cut hard wood.
- MULTI DEGREE: The sharp blades have a cutting angle of 45, 60, 75, 90, 105, 120, 135 degrees, allowing you to freely cut differently shaped wire slots when needed.
- HIHG QUALITY: Sturdy steel frame with plastic cover handle for comfortable diagonal cutting, not suitable for cutting metal and stainless steel.
- Non-slip ergonomic handle, time and labour saving, easy to cut.
- 【HIGH QUALITY】The Miter Cutter is made of premium grade Stainless steel blade, high hardness, high strength and durability
- 【PROFESSIONAL DESIGN】 Adjustable Angle, allows for a 0°-135°cutting angle, free to cut stuff to different shape when you needed, saves your time and improve work efficiency.
- 【APPLICATION】Miter Shears mainly use in cuting of plastic glue, PVC wiring duct, decorative wood,polyurethane, fixing edges, shoe moulding, truncking, chamfer, carpet etc.
- 【COMFORTABLE TO USE】The shaper tool handle is covered with thick rubber, non-slip, easy to hold and prevent your hands from getting injured.
- 【AFTER-SALE GUARANTEE】We guarantee you have a good shopping experience. Please feel free to contact us when you needed.
Our Best Choice: FLORA GUARD Miter Shears – Multifunctional Trunking Shears for Angular Cutting of Moulding and Trim, Hand Tools, Including 2 Spare Blades
[ad_1] Features:
√ Sharp and toughness, rust resistant SK 5 metal blade.
√ Ergonomically formed smooth non-slip built-in handle.
√ Lock-in blade for safety prevents from damage.
√ The cutting angle is 45°-135°, which can be slice into distinct styles of wire grooves as essential.
√ Further 2 spare alternative blades.
Specification:
Material: SK5 alloy metal
Fat: .73 lb
Warranty Company
If there is any problems with our Miter Shears or company for any purpose, do not be reluctant to get hold of us by E mail. We will give you a new substitute or concern you a comprehensive refund. We worth consumer gratification previously mentioned all else.
Offer Together with:
1 x Miter Shears
2 x Substitution Blades
Good for reducing Chamfer, Shoe Molding, Truncking, Plastic and Gentle Wooden areas
Sharp blade with new angle adjustable block 45° -135° cutting angle, free to slice the trunking to different condition when required
Solid and tough built-in deal with is made of aluminum alloy and PPC anti-skid include. Comfy grip no hand exhaustion for very long-phrase use.
The flip clasp closure is easy to near and open up, risk-free and convenient, you no have to have to fret about staying unintentionally scratched by the blade.
Sharp, weighty responsibility replaceable blade, together with 2 further Spare Blade
Leave a Reply