When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best angle grinder metal cutting wheel in 2023 Comparison Table
Bestseller No. 1
DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack (DW8062B5)
- Thin .045" wheel design for fast burr free cutting
- Proprietary aluminum oxide grain combination for aggressive cutting action
- Proprietary Material Mix ensures durable long life wheels
- 2 full sheets of fiberglass for durability and safety
- Product Image may vary
SaleBestseller No. 2
LENOX Tools Cutting Wheel, Diamond Edge, 4-1/2-Inch (1972921)
- Delivers 1,000 or more cuts without changing the wheel
- Advanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1” carbon steel square tube vs. thin bonded abrasive cutoff wheels.
- Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels
- Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision
- Does not wear down like bonded abrasives reducing dust particles for a cleaner work station
Bestseller No. 3
Makita 5 Pack - 4.5" Cut Off Wheels For 4.5" Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045" x 7/8-Inch
- ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
- ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
- ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
- ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
- ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
Bestseller No. 4
Truswe Cut Off Wheels 52 Pack,4 1/2 Inch,0.45 USD/Pack,Metal and Stainless Steel Cutting Wheel for Angle Grinder,Ultra Thin Cut-Off Wheel Cutting Disc
- 🛠️【PERFECT SIZE】Perfectly compatible with all 4-1/2 inch(115mm) angle grinders with 7/8 inch(22.2mm) arbor. Thickness:0.045 inch(1.2mm). Operating up to 13,300 RPM.
- ⚙️【 PRECISE AND QUICKLY】0.045 inch ultra thin design for fast burr free and precise cutting perforamce with minimal material loss.
- 🦾【SAFETY - AVOID WHEEL SHATTER】Metal cutting discs are made of aluminum oxide grains. More safe than other wheels that may shatter or prematurely wear. Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
- 🔧【DURABLE】Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting longer, faster and reliably than other wheels that may shatter or prematurely wear.
- 🔩【MULTIPLE UESES】Cutting discs are designed for hard and continuous use on all metal, fiberglass, iron, plastic, steel and stainless steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing and other ferrous metals for aggressive cutting action.
Bestseller No. 5
EZARC Diamond Cutting Wheel 4-1/2 x 7/8 Inch for Metal, Cut Off Wheel with 5000+ Cuts on Rebar, Steel, Iron and INOX
- [Diamond technology] 1 equals 100, EZARC diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.
- [All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications.
- [Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, diamond cutting edge is 100% contaminant-free, it does not wear down like bonded abrasives, reducing dust particles for a cleaner work station.
- [Industrial Quality] Quality Assured accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
- [Accurate Cutting] Maintains original wheel diameter throughout the life of the blade for better control and precision cutting.
SaleBestseller No. 6
WORKPRO 20-pack Cut-Off Wheels, 4-1/2 x 7/8-inch Metal&Stainless Steel Cutting Wheel, Thin Metal Cutting Disc for Angle Grinder
- ✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and stainless steel.
- ✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.
- ✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr free cutting with minimal material loss, make cutting project more precise and efficient.
- ✅ Great Performance: Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,000 RPM and 80M/S.
- ✅ Versatile Applications: Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and all other ferrous metals.
Bestseller No. 7
50 PCS Cut Off Wheels LEILUO 4-1/2 x 1/24 x 7/8 inch Angle Grinder Cutting Wheel Ultra-Thin Cutting Disc For Metal Stainless Steel Aluminum Iron
- VALUE PACKAGE: The diameter of the 50-piece cut off wheels is a quarter (4.5) inch, the metal center is 7/8, and the thickness is 0.040. And cost less than one dollar per piece, High-quality goods, affordable consumption. Choose us, quality life.
- HIGH-QUALITY MATERIALS: Grinding wheel is bonded by high-quality alumina particles and reinforced by glass fiber mesh. Thereby reducing the damage of the grinding wheel, realizing precise cutting performance, stability and integrity, and prolonging the service life.
- EFFICIENT CUTTING: Cutting wheel can realize fast cutting without burrs, and the thinner design can minimize the surface area contact between the cutting object and the cutter wheel, thereby achieving faster and cleaner cutting. Save time and cost.
- WIDELY USED: High-quality grinder cutting wheels are very suitable for cutting carbon steel, stainless steel, steel bars, steel pipes, galvanized steel, sheet metal and other metals. With strong aggressiveness and low heat load, it can achieve first-class cutting speed.
- MORE COMPATIBLE: 50-piece cut off wheel metal set is fully compatible with all 4-1/2-inch angle grinders with 7/8-inch spindles, with speeds up to 13,300 RPM and 80M/S. When using these cutting wheels, please wear all applicable safety equipment.
Bestseller No. 8
DEWALT Cutting Wheel, All Purpose, 4-1/2-Inch, 5-Pack (DW8424B5)
- Thin .045" wheel design for fast burr free cutting
- Proprietary aluminum oxide grain combination for aggressive cutting action
- Proprietary Material Mix ensures durable long life wheels
- 2 full sheets of fiberglass for durability and safety
- Product Image may vary
SaleBestseller No. 9
GRAFF BLACK 4 1/2 Diamond Cut Off Wheel for Metal - Cutting Wheel for Angle Grinder - 60x Longer Wheel Life - 115 mm
- UNIVERSAL - Our cut off wheel has CONSTANT DIAMETER that allows dry cutting of metal, rebar, iron, metal profiles, aluminium, different types of pipes and another sheet metals.
- LONG LIFE - According to the test results, GRAFF BLACK enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the cutting segment.
- COMFORTABLE USAGE - Our cutting wheel is more comfortable in usage than any abrasive wheel: less sparks, no dust, no smell, no overheating. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting.
- SAFE WORK - Due to special construction of the disc body made of high-strength steel, disc rupture is excluded when operating at high rotation speed (13200 RPM)
- CERTIFICATED - Our metal cutting wheel was certified by MPA Hannover.
Bestseller No. 10
14PCS 4.5 Inch Angle Grinder Polishing Wheels Kit for Metal, Cutting and Grinding Wheel Assorted Grit Flap Discs Strip Disc Scouring Wheel Felt Flap Disc Set for Angle Grinder，7/8 inch Arbor
- 【ALL IN ONE POLISHING KIT】: POLIWELL 4.5 inch angle grinder disc set includes 2 x cut-off wheels, 1 x grinding wheels, 8 x assort grit flap discs, 1 x stripping disc, 1 x Scouring wheel and 1 x felt polishing disc, satisfying your multiple requirements from cutting, grinding, paint & rust removal and polishing.
- 【PREMIUM QUALITY】: Cutting wheels are made of aluminum oxide grain with double mesh reinforced design, sharp and durable; Grinding disc is made of corundum grain, cymbal shape is designed for high grinding capacity; Flap sanding discs are made of zirconium abrasive, with fast cutting speed and good self-sharpness; Stripping disc is made with silicon carbide grain; Scouring wheel does not burn the surface; Felt wheel is made of 100% wool-favored for superior buffering properties.
- 【FULL-FEATURED】: Cutting discs and grinding wheel are designed for ordinary metal and stainless steel cutting & grinding; T29 Flap discs are ideal for high speed sanding and heavy duty removal; Strip discs can rapidly removing scale and oxidation, removing paints, rust, grease, oil or protective waxes; Scouring wheel can polish flat, concave, convex curved surface, making surface smooth; Felt flap discs are used in the final stage of polishing for a high gloss or mirror finish.
- 【WIDE APPLICATION】: This cutting & grinding & polishing discs set contains all kinds of angle grinder abrasive tools, will meet your different project requirements. Widely used for cutting, grinding, cleaning, polishing and finishing on metal, stainless steel, iron, glass, jewelry, plastic, ceramics, marble and more.
- 【COMPLETE KIT FOR ANGLE GRINDER】: All angle grinder discs size are 4-1/2'' Diameter with 7/8'' Arbor, fit for 4.5 inch most type of angle grinder. Please wear all applicable safety gear when using angle grinder disc(eyes/ears/face/hands/body/etc).
Our Best Choice: 50 Pack – 4 1/2″ x .040″ – Circular Cut-Off Wheels – Metal And Stainless Steel – For Angle Grinders – Very Fine Abrasive Quality Cutting Disc For Various Applications 7/8″ Shaft
Our rating: (4.2 / 5)
(4.2 / 5)[ad_1]
✅ ENFORCER incredibly good disc 1/25 or 1. millimeter creating your reducing position less complicated and a lot quicker. For a longer time life in standard metal. No curved cuts, only straight cuts. The ideal benefit for your dollars. Rapidly, tough, economical for certain.
✅ Dimensions: Every cutting disc 4 1/2 steel has a diameter of 4 1/2 inches (4.5) with a 7/8″ steel center and a thickness of .040″. They are pretty thin to supply rapid and precise cuts. Low vibration and comfortable reducing.
✅ PRIMIUM metallic and stainless steel cut-off wheels for 4 1/2″ angle grinders and appropriate, exceptional quality and heavy responsibility wheel made use of in most reducing work. Shoppers are really content and have specified us several positive feedback.
✅ 50 ABRASIVE Reducing DISCS are great for speedy, thoroughly clean reducing in carbon metal, pipe, iron, stainless metal, copper, brass and all ferrous and non-ferrous metals. Will work very well with substantial brand name 4.5 inch angle grinders.
✅ Protection Have on all relevant and essential basic safety machines when utilizing these drives. (eyes/ears/confront/arms/physique/etc.). Never exceed the highest pace of 13,300 rpm and switch the front wheel that is chipping. Do not use extreme force on the wheel, it will put on a lot more promptly.
Leave a Reply