When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best anular cutter in 2022 Comparison Table
Bestseller No. 1
Annular Cutter Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Inches Cutting Depth 1 to 2 Cutting Diameter Two Flat HSS Kit for Drill Press with 2 Pilot Pins
- Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Made of tough high speed steel material, with longer service life and high heat resistance.
- Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- Includes 6 Cutters ( Cutting Diameter：1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 & 2"), 2 pilot pins & 1 plastic tool carrying case.
SaleBestseller No. 2
Evolution CC625 5/8-Inch Diameter x 1-Inch Depth of Cut Cyclone High Speed Steel Annular Cutter
- 5/8" Diameter x 1" Depth of Cut
- M2AL High Speed Steel
- 3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses
- Includes free pilot pin
Bestseller No. 3
Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth
- CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack
- Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench
Bestseller No. 4
Annular Cutters Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth 7/16 to 1-1/16 Cutting Diameter HSS Kit for Magnetic Drill Press with 2 Pilot Pins
- Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Made of tough high speed steel material, with longer service life and high heat resistance.
- Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- Includes 6 Cutters ( Cutting Diameter：7/16, 9/16, 11/16, 13/16, 15/16 & 1-1/16"), 2 pilot pins & 1 plastic tool carrying case.
Bestseller No. 5
Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins
- 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- 2.Made of tough high speed steel material, with longer service life and high heat resistance.
- 3.Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- 5.Includes 11 cutters ( Cutting Diameter:7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16"), 2 pilot pins (4.74x77mm,6.35x77mm) & 1 plastic tool carrying case.
Bestseller No. 6
Evolution Power Tools A-CC6SET-1 CYCLONE Premium 1-Inch Annular Cutter Set with Pilot Pins-For Use With Magnetic Drills, 6-Piece
- Free Pilot Pin Included
- 3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses
- Made of M2AL High Speed Steel
Bestseller No. 7
Steel Dragon Tools AC2-7PCLG 7PC Annular Cutter Kit Depth 2" Large Sizes 1" - 2" 1 Pin
- Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin.
- Cutting Depth: 1-3/8 in.
- 3/4 in. Weldon Shank
- Includes carrying case.
- SDT annular cutters will drill large holes up to ten times faster than regular drills bits.
Bestseller No. 8
Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins
- 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- 2.Made of tough high speed steel material, with longer service life and high heat resistance.
- 3.Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- 5.Includes 11 cutters ( Cutting Diameter:7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16"), 2'' long cutting depth & 1 plastic tool carrying case.
Bestseller No. 9
Accusize Industrial Tools Hss Professional Annular Cutter Set 1'' Cutting Depth, 7/16'' to 1-1/16'' with 3/4'' Weldon Shank, 8 Pc Set, HSS1-0000
- 1 inch cutting depth, 8 pc Annular Cutter set; 3/4'' Weldon Shank
- Incudes 2 pcs pilot pins and 6 pcs Annular cutters
- Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'; Pilot Pin Size:1/4" x 3" (overall length)
- Cuts holes in steel accurately, quickly & safely; Large holes can be drilled up to ten times faster than regular drills bits; Make overlapping holes, slotting holes and edge cuts; Made from tough, high-speed tool steel
- ; Machine-finish hole-no reaming needed when used with lubricant; American Standard
Bestseller No. 10
ACTOOL 1-3/4" Diameter × 1" Depth of Cut HSS ANNULAR CUTTER with 3/4'' Weldon Shank
- 1-3/4" Diameter x 1" Depth of Cut include free Pilot Pin
- Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability.
- Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting.
- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form.
Our Best Choice: Evolution CT168L 1-11/16-Inch Diameter x 2-Inch Depth of Cut Cyclone Carbide Tipped Annular Cutter
Our rating: (4.4 / 5)
(4.4 / 5)[ad_1] Evolution Cyclone Quality Carbide Tipped Annular Cutters are developed to give the maximum benefit in annular cutter technological know-how. Created with top quality M2AL composite and higher grade carbide strategies, Cyclone Cutters previous longer, allowing more holes slash per greenback as opposed to normal annular reducing bits. The free involved pilot pin will save the consumer time and money from possessing to discover the suitable accent pin.
1-11/16″ Diameter x 2″ Depth of Slice
Carbide Tipped, appropriate for most resources which includes stainless metal
3/4″ Weldon shank with 2 flats – matches most standard magnetic drill presses
Involves no cost pilot pin
Certain in opposition to breakage
Leave a Reply