When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best circular saw guide in 2022 Comparison Table
Bestseller No. 1
Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue
- Make rip cuts and crosscuts up to 24" Wide
- Cut multiple pieces to the same size With just one setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring, and layout lines
- Take your saw to the material instead of having to take your material to the saw
SaleBestseller No. 2
Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100
- Clamping end moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for a secure grip that won’t budge
- Made of heavy-gauge, rigid aluminum for extreme durability
- Use with circular saws, routers, Jig saws, and other portable power tools
- Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
SaleBestseller No. 3
Circular Saw Track (Circular Saw Track)
- Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels
- Simply align the guide Track with your marks to make accurate cuts
- Hold track in place without clamps thanks to anti-slip guide strips
- Prevent splintering with anti-chip strips that support material during the cut
- Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,
Bestseller No. 4
The Circular saw, a Guide Book for Filers, Sawyers and Woodworkers
- Hardcover Book
- English (Publication Language)
- 118 Pages - 08/08/2015 (Publication Date) - Andesite Press (Publisher)
Bestseller No. 5
Makita XPS01PTJ 5.0Ah 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 6-1/2" Plunge Circular Saw Kit with 194368-5 Guide Rail, 55-Inch
- Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL Brushless motor delivers 6, 300 RPM for maximum performance and 50% longer run time per charge
- Automatic speed change technology adjusts cutting speed and torque during cut for optimum performance
- 55-Inch Guide Rail (1400)
- Dead-on straight or bevel cutting
SaleBestseller No. 6
Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting Length, 544050
- Clamping end moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for a secure grip that won’t budge
- Made of heavy-gauge, rigid aluminum for extreme durability
- Easily increase length up to 100 in. By adding the Bora NGX 50-inch aluminum extension
- Winner of the 2019 Pro Tool Innovation Award (PTIA) in the Track Rail category
Bestseller No. 7
Kreg KMA3700 ACCU-Cut XL
- Break down panels and plywood easily and quickly with cutting capacity up to 100"
- Splinter-free cuts with tear-out protection from anti-chip guide strips
- Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
- Easily attaches to your left-blade or right-blade circular saw, and removes easily
- No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut
SaleBestseller No. 8
Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100
- GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
- LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut
- MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
- SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
- ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide
SaleBestseller No. 9
Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
- CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cut
- GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips
- EASY SAWING: Take your saw to the material instead of having to take your material to the saw
- VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts
- BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System
Bestseller No. 10
Milescraft 14000713 Saw Guide for Circular and Jig Saws
- Incremental trim feature makes tool-free adjustments by 1/16 inch
- Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
- Extends saw blade up to 6″ from edge of workpiece with Circular Saws
- Cuts circles from 4″ to 19″ in diameter
- 4 metal bars and special clips accommodate most circular and jig saws
Our Best Choice: Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100
Our rating: (4.6 / 5)
(4.6 / 5)[ad_1] The NGX clamp edge program helps make it faster and less difficult to split down sheet content — rip and crosscut boards with clean up, accurate cuts each individual time. NGX presents you keep track of noticed-like precision with out the significant cost tag.
Clamping conclusion moves with manage for uncomplicated adjustability from a person facet
Locking take care of grabs work surfaces for a protected grip that will not budge
Designed of weighty-gauge, rigid aluminum for severe toughness
Use with round saws, routers, Jig saws, and other moveable power resources
Features Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
Leave a Reply