When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
Top 10 Rated cnc plasma cutter in 2022 Comparison Table
- ★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
- ★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
- ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
- Comes with Blow Back IPT-80M machine plasma cutting torch
- IGBT Infineon Modules / Inverter technology
- 80AMP Inverter Type cutter @ 60% duty cycle -- 5 Year (Parts and Labor)
- IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1"
- MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4"
- LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch
- IGBT Infineon Modules / Inverter technology
- 80AMP Inverter Type cutter @ 60% duty cycle -- 5 Year (Parts and Labor)
- IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1"
- MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4"
- Redesigned new PowerPlasma 52i model with NEW upgraded IPT-60 torch
- NEW! Gouge Function. 50 Amps of professional cutting power
- Blow-back start technology, Pilot Arc / 110/220v Dual Voltage
- CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION
- Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
- 🛒[Cutting Thickness] plazma cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI recommendation
- 🛒[Wildely Application and Low Cost] this plasma cutter 45amp available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture
- 🛒[Blowing Time] cutting torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.Besides,the blowing time can be set by adjusting the knob
- 🛒[Generator Supported] this RBC-4500 plasma cutter works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V
- 🛒[Warranty Service] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance
- 【High Quality】Cut-50 50AMP plasma cutter is made of high quality components, By adopting the most Advanced inverter technical of switch power, as well as the Product life and work efficiency are increased by 30% than ordinary machines, smooth cutting surface,Permanent supply of high quality consumables(CORAL)
- 【Portable Design】 Compact plasma cutting machine with LCD digital display and equipped with a portable handle，It is very convenient to operate and carry.Long term supply of consumables.
- 【Dual Voltage】This plasma cutter can automatically adapt to switch input power of 90V-260V(110V-220V), Plug and play in different environments, no external conversion plug required
- 【Application】 this is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting thickness is 1-20mm, effective cutting thickness 10mm
- 【Quality Assurance】 We are a factory! we have 12 years professional production experience of plasma cutter, 3-year warranty, please be assured to buy.please submit registration form on our website.
- ▶ ▶About the Gift: we will send it separately,so please contact us after your order. [Cutting Thickness] Reboot cutting machine 20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation
- [Widely Application and Low Cost] This cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture
- [Generator Supported] this RBC-5000D plasma cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V
- [Blowing Back] pre-made 3 seconds of blowing time after you release the torch,to cool down the cutting torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)
- [Warranty] buy this plasma cutter with confidence as Reboot offers 3-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance
- Paul, Eddie (Author)
- English (Publication Language)
- 144 Pages - 11/01/2011 (Publication Date) - HP Books (Publisher)
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
- 🔔★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
- 🔔★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
- 🔔★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual
- 🔔★Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
- 🔔★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.
Our Best Choice: Mophorn CNC Plasma Cutter 63″ x 118″ Effective Cutting, Portable CNC Machine 110V, Professional Plasma Cutting Machine, Flame Cutting Machine for Oxyfuel and Plasma Cutting
(4.2 / 5)[ad_1]
Product Description
Key Features
Great Cutting Capacity
Oxyfuel flame cutting gas supply type: Propane/acetylene + oxygen. Oxyfuel flame cutting thickness: 0.24-7.87 inches, Max.cutting speed: 23.6 inch/min.
Heavy Duty Track Rail
2 axis design(X and Y axis), effective cutting range: 63″x118″. Made of high-strength steel, it is sturdy, heavy duty and non-break.
Distinct Control Panel
Both cutting control system & torch height controller adopt LCD screen to display parameters, easy to adjust different functions by buttons.
Dynamic Bore Hole
The THC supports dynamic bore hole, effectively prevent slag to splash everywhere, help protect torch head.
Input & Output
All input & output port type and the number can be customized. Front USB 2.0 port, convenient to transmit files.
Wide Application
This portable CNC machine is perfect to be used in steel processing industry, help to decrease workers work and make cutting works more intelligent, get more complex cutting functions.
Specifications
Cutting Control System:
Control Axis: 3
Control Accuracy: +/-0.001mm
Max Speed: 15,000 mm/min
Torch Height Controller:
Work Voltage: DC 24V
Motor Drive: PWM
Output Current: 0-3A
Load Capacity: 100W
Package Content
1 x CNC Machine with THC
Portable CNC Machine
This is an automatic portable CNC machine with THC. The cutting control system can control the motion of 2 axises, which is suitable for flame or plasma cutting. The THC controller is designed to change the height between torch & workpiece. This kit is accurate, stable, low noise, while easy to operate.
Great Cutting Capacity
Heavy Duty Track Rail
Distinct Control Panel
Dynamic Bore Hole
Effective Cutting Range
63″x98″ / 1600×2500 mm
63″x118″ / 1600×3000 mm
63″x138″ / 1600×3500 mm
63″x236″ / 1600×6000 mm
Track rail size
84″x118″ / 2135×3000 mm
84″x138″ / 2135×3500 mm
84″x158″ / 2135×4000 mm
84″x256″ / 2135×6500 mm
Setting Scope of Arc Voltage
30-600V
30-600V
30-600V
30-600V
Input Voltage
110V±15%, 50/60Hz
110V±15%, 50/60Hz
110V±15%, 50/60Hz
110V±15%, 50/60Hz
Max Speed
15000mm/min
15000mm/min
15000mm/min
15000mm/min
Cutting Mode
Flame Cutting & Plasma Cutting
Flame Cutting & Plasma Cutting
Flame Cutting & Plasma Cutting
Flame Cutting & Plasma Cutting
Torch Height Controller
✓
✓
✓
✓
【WIDE CUTTING RANGE】- Cutting Controlling System-Axis: 2(X and Y); Accuracy: ±0.001mm; Work Speed: 15m/min. THC-Drive Way: PWM constant speed adjust; Arc Voltage Adjust Accuracy: 1V. Effective cutting range: 63″x118″. Track rail size 84″x138″. Input Voltage: 110V.
【HIGH CUTTING CAPACITY】- Oxyfuel flame cutting gas supply type: Propane/acetylene + oxygen. Oxyfuel flame cutting thickness: 0.24-7.87 inches, Max.cutting speed: 23.6 inch/min.
【MULTI PROTECTIONS】- The cutting system has: power-off protection, memory function. The THC support: Over load/Over-heat protection, low-voltage protection, anti-interference. Guarantee the safe & stable situation on operation.
【MULTI-LANGUAGE SUPPORT】- This product is widely support languages, like: English/French/Portuguese/Russian/Denmark/Korean language etc.
【WIDE APPLICATION】- Perfect to used in steel processing industry, help to decrease workers work and make cutting works more intelligent, get more complex cutting functions.
Leave a Reply