When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best compressor regulator with gauge in 2022 Comparison Table
- Four Way Valve: This air pressure regulator has four holes. Three holes of 1/4" NPT and one hole for 1/8" NPT.
- Package included: 2 x 1/4" NPT Fittings, 1x Dial gauge for the 1/8" NPT, there is no fitting included for the another 1/4" NPT. Only three fittings for the Four holes.
- Max Voltage: 240 V; Max current: 15 amp; Max pressure: 175PSI, 12BAR. Practical and durable, easy to install and disassemble
- With the barometer: This regulator comes with a dial gauge meter, it can be set and read the data
- With the valve knob: can according to need to adjust air pressure. In use it can help to save electric energy
- BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The filter element is brass that provide higher efficient filtration and long lifetime than the fiber one.
- PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure.
- GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and mpa. The Max pressure is 150 PSI. The filter cup is designed to be transparent for observing the volume of water and oil.
- EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control. Some necessaries are also included in this kit: a double MNPT fitting and a thread seal tape.
- PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
- Maintain steady stream of compressed air with clearly visible control gauge for easy setting and air flow control with the use of Le Lematec AR-02 air compressor regulator with gauge.
- Le Lematec AR-02 Diaphragm type Air Flow Regulator provides precise air flow control. Suitable for ¼-inch inlet and outlet configuration, and can measure pressure of 0-140PSI,0-10 BAR.
- AR-02 air flow regulator offers a wide variety of applications. Perfect compressed air accessory for air tools such as spray guns, sandblasters, plasma cutters, HVLP guns and other air tools.
- Le Lematec AR-02 air flow regulator is impact and solvent-resistant designed to withstand tough applications. With metal and glass gauge for easy setting. Ideal for any compressed air operations.
- Lightweight and saves space. Weighing only 0.35 kilograms, AR-02 air regulator is lightweight with compact design without taking up space and add weight on air tools when in use.
- Auto control. Cut off at 120PSI, Turn on at 90PSI
- ADJUSTABLE AIR OUT: air pressure from one of the brass coupler is adjustable
- Heavy duty LEFOO Air Compressor Pressure Switch + Valve Gauges Regulator
- Thick material makes solid quality manifold
- Comes with threadlocker. Easy to use, easy to assemble
- Heavy Duty compressed air filter oil water separator regulator with gauge designed to withstand any work environments. The Piggy Back is a hybrid AI303 Filter Oil Water Separator and AR 01 Air Flow Regulator
- Lightweight non corrosive and impact resistant universal one quarter inch compressed air filter regulator made for standard fitting with any air compressor and air tools.
- Pressure modulation and filtration all in one for optimized operation tight setup and complex compressed air configurations. This filter regulator combo provides superb efficiency for all air tools and accessories.
- Precise air pressure with a transparent pressure gauge provides comfortable pressure setting and reading. Its pressure relief valve can handle pressure readings of 1~10 BAR and 0~ 140 PSI. It works perfectly as end regulator for paint spray guns and other air tools.
- Quick and easy to clean air filter water separator with push button drain valve to release trapped water fast and easy. No need to disassemble or uninstall at all.
- Air regulator for precisely regulating and maintaining constant air pressure
- Accurate downstream air pressure regulation between 1 and 150-psi
- High impact composite regulator knob and steel protected gauge
- 60-Scfm at 100-PSI with 1/4-inch NPT ports
- Comes with a 1-year limited
- 【Product Name】Air Filter Pressure Regulator Combo Piggyback
- 【Size】Air Filter Pressure Regulator Port Size:1/4" NPT；Gauge Port Size：1/8“NPT
- 【Working Pressure】0-145PSI【Working Temperature】32～140°F
- 【Features】To lower or maintain air pressure; Filter moisture and fine particles from the air.
- It can easily adjust the air compressor to control the pressure and is low power consumption.
- Easy to install and remove;Quality tested for maximum reliability and high performance in even the toughest environments.
- The main function of the valve is to adjust the air compressor to close and start the pressure; Users can adjust according to their actual situation.
- Right red is the safety valve. The air regulator on both sides of the copper is an exhaust valve that opens the gas when used.
- Dual pressure gauges can display pressure more quickly and conveniently adjust pressure
- HVLP Regulator rated flow 89 SCFM making it ideal for all types of air paint guns and air tools.
- Regulate pressure with the air compressor gauge by rotating the knob increasing or decreasing air pressure.
- The air flow regulator comes with 1/4-inch universal thread swivel nut and male air inlet fitting
- Compressor Regulator Made from Aluminum Alloy Material to withstand heavy shop conditions.
- Air Regulator ¼ NPT
- Country of Origin:China
- Package length:6.7"
- Package width:4.5"
- Package height:2.0"
Our Best Choice: 1/4” Air Flow Regulator, Air Compressor Regulator with Gauge, Controls Air Flow for Air Tools
Pressure assortment: -10BAR (-140PSI)
Gauge dial diameter:4.3cm/1.7in
Package deal listing:
1 x Air Force Regulator
This control air valve offers exact air stress measurement. Its strain relief valve can take care of strain readings of ~10 BAR and ~ 140 PSI.
1/4″ NPT thread port can be applied with the spray gun, realize the screen, alter and handle the pressure.
It supports a vast selection of air intake desires. The best tension relief valve stainless metal that is handy and can suit any compressed air equipment or products for your advantage.
Ideal for experienced and personalized use in workshops, automotive, wooden-performing, spray portray and a lot more!
AIR Stress REGULATOR FOR SPRAY GUN: Supplies specific air stress measurement from to 140 psi (1 to 10 bar). Correctly for paint spray guns and air compressor regulator
AIR REGULATOR WITH Universal THREAD SWIVEL NUT: With 1/4″ NPT thread swivel nut , it suits most spray guns which makes it far more easy and flexible to use.
Spray Gun Regulator with Gauge can be made use of with the spray gun, monitor air inlet pressure in genuine time, so as to acquire the finest portray influence.
This stress regulator adjustable ,Compact, adaptable adjustment and light-weight body weight, straightforward to install and sustain, quite sensible.
Great compressed air accessory for air resources this kind of as spray guns, sandblasters, plasma cutters, HVLP guns and a lot more.