When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated compressor regulator in 2022 Comparison Table
- BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The filter element is brass that provide higher efficient filtration and long lifetime than the fiber one.
- PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure.
- GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and mpa. The Max pressure is 150 PSI. The filter cup is designed to be transparent for observing the volume of water and oil.
- EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control. Some necessaries are also included in this kit: a double MNPT fitting and a thread seal tape.
- PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
- Four Way Valve: This air pressure regulator has four holes. Three holes of 1/4" NPT and one hole for 1/8" NPT.
- Package included: 2 x 1/4" NPT Fittings, 1x Dial gauge for the 1/8" NPT, there is no fitting included for the another 1/4" NPT. Only three fittings for the Four holes.
- Max Voltage: 240 V; Max current: 15 amp; Max pressure: 175PSI, 12BAR. Practical and durable, easy to install and disassemble
- With the barometer: This regulator comes with a dial gauge meter, it can be set and read the data
- With the valve knob: can according to need to adjust air pressure. In use it can help to save electric energy
- HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR PRESSURE REGULATOR.
- 250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
- ADJUSTABLE FROM 7 PSI TO 215 PSI, 140 SCFM FLOW RATE.
- HIGH IMPACT LOCKING COMPOSITE KNOB.
- 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05" LINEAR.
- Durable: ABS shell + Iron galvanized connector + Brass control valve, durable and anti-corrosion.
- Size: Thread: G1/4, Pressure Range: 90-120PSI, Maximum Voltage: 240V, Maximum MAP Current: 20A.
- Adjustable Air Outlet: The air pressure at the brass joint is adjustable, which prevents the air pressure from being too high or too small so as to keep stable working.
- Application: Air compressor pressure switch Control valve is designed to control and adjust air compressor pressure and better for high efficiency working.
- Service: Enjoy a smooth & worry-free return service within a month. Any questions feel free to contact us, we will be here for you.
- 3/4" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1
- 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER
- STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS.
- STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE.
- STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS.
- Includes (1) Air Compressor Replacement Pressure Regulator
- Sold and Shipped By Apex Tool Supply
- Bulked Packaged
- 3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN
- 11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET
- 160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED
- 225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI
- Thread: 1/4 NPT
- Rated Flow: 88.3 SCFM (2500 L/min)
- Temperature Range: 5~60 ℃ (41-140 ℉)
- Aluminum Alloy Material
- When regulating pressure, pull up the rotary knob and rotate clockwise to increase the pressure and rotate anticlockwise to decrease the pressure
- 【Product Name】Air Filter Pressure Regulator Combo Piggyback
- 【Size】Air Filter Pressure Regulator Port Size:1/4" NPT；Gauge Port Size：1/8“NPT
- 【Working Pressure】0-145PSI【Working Temperature】32～140°F
- 【Features】To lower or maintain air pressure; Filter moisture and fine particles from the air.
- This regulator is used on compressor
- Part fits model number 165570
- This part fits model number 167783
- 4-Inch long, 2-Inch wide, and 2-Inch high
- Package weight of this item is 2-Pound
Our Best Choice: 1/4″ Compressor Air Filter Air Pressure Regulator Water-oil Separator Trap Filter with Lubricator Cup for Air Tools System by ZHONG AN
[ad_1] Merchandise description
What’s the functions of this compressor air filter?
1, FILTER: This air compressor regulator is incredibly efficient to handle strain and clear away the humidity, dust, particles of air to provide cleanse air to prolong air applications lifestyle like air spray gun, and also secure workers’ health in functioning natural environment.
2, REGULATOR: You can transform the gasoline line force within the specified selection by utilizing knob. Only need to have pull up the knob and rotate it to boost or cut down the air pressure. It truly is quite convenient to use and straightforward to work.
3, LUBRICATION: Add oil into the oil cup from the oil filling screw just exhibit in the picture, when the item performing, the oil will get an atomization effect and atomized oil will be sent to the components and factors of air applications to lubricate those people and continue to keep them work properly.
√ Air inlet measurement: 1/4 NPT
√ Filter drinking water cup capability: 15CC:
√ Adjustable tension vary: 7-128PSI(.5-9BAR)
√ Max operating stress: 135PSI(9.5BAR)
√ Operating Temperature Selection: 40-140F(5-60℃)
√ Human body content: Aluminum alloy
√ Drain kind: guide
Package deal Provided:
※1x Air Filter Regulator Humidity Lure
※1x tension gauge
※1x metallic bracket
※1x English instruction
Welcome to our store! 🙂 We already altered the instruction into English model. If you have any issues be sure to make contact with me. I will reply within 24 several hours and test my greatest to help you. Many thanks.
✔ Efficient to take away the humidity of air to modify with what is your will need.
✔ Can filter small particles, continue to keep the air clear, easy to install and maintain in light body weight.
✔ To pull up the black big knob, rotate to get specified tension you established and can maintain this strain in extended time.
✔ Clockwise to boost force and anticlockwise lessen tension.
✔ Lubricator cup can make oil get an atomization effect to ship atomized oil to the aspects of air tools and prolong resources assistance lifetime and keep them function much better.