When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best craftsman table saw parts in 2023 Comparison Table
Bestseller No. 1
Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 1/2" Tilt or Elevation Shaft
- 4 1/2" diameter handwheel, fits 1/2" shaft. Used on the blade elevation and tilt shafts.
- Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 1/2" diameter shafts.
- Replaces Sears Part Numbers: 818526, 63689, 820452, & 806872
- Will not fit older model 113.xxxxxxx saws that have 3/8" diameter shafts.
Bestseller No. 2
Craftsman Belt Drive Contractor Table Saw 2 1/2" Pulley with Keys for 5/8" Arbor or Pulley Shaft
- Sears Craftsman Belt Drive Table Saw Arbor or Motor Pulley with Keys.
- 2 1/2" diameter pulley that fit a 5/8" keyed shaft.
- A 3/16" square key and a 3/16" woodruff key is included.
Bestseller No. 3
Yellow Safety Switch Key Compatible with Craftsman Radial Arm Jointer Band Drill Sears Table Saw, Sander, Band Saw, Drill Press Parts- Oval (1pcs-pack)
- This key is an OEM injection molded part. It is not a 3D printed copy.
- This Safety Key fits many Sears Craftsman Rocker Style, Power Switchs used on many models of Craftsman power tools.
- Key head is and approximate 7/8" in diameter but is slightly oval shaped. The longest leg is about 15/16" and the short leg is about 5/8" long.
- Sears sold this key under several part numbers including 22255, 60256, and 976863-001.
- The last picture shows the key installed in a typical switch. This listing is for the KEY ONLY
Bestseller No. 4
Table Saw Switch Replacement Compatible with Ryobi and Craftsman, Safety Power Tool Switch,Paddle On/Off Switch for Table Saw 125v
- ✅ 【 TABLE SAW SWITCH】: The Paddle Switch for Table Saw,compatible with most Craftsman and Ryobi Table Saws. Note,it's not created or sold by Craftsman/Ryobi.
- ✅ 【 FUNCTION】:Removalbe safety key to lock the switch prevents from accidental operations.Large paddle for emergency stop.
- ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
- The product is not sponsored or endorsed by Ryobi,Craftsman
Bestseller No. 5
Sears Craftsman RM870 RM871 RM872 Motor Rebuild Kit for 137.xxxxxx Motorized Table Saws
- Sears Craftsman Motor Rebuild Kit for 137.xxxxx Series Motorized 10" Table Saws with Motors Tagged RM870 RM871 & RM872 Motors. Some owner's manuals will identify this motor as part number 0QEF
- This motor rebuild kit contains an armature bearing set, arbor bearing set, and brush set. This is not a replacement motor. This kit's contents are shown in the first two photos. The last 5 photos are for reference to identify application.
- These will fit the following models: 137.218240, 137.218020, 137.218780, 137.218760, 137.248830, 137.218040, 137.218041, 137.218101, 137.272220, 137.248850, 137.218100, 137.212920, 137.248250, 137.285540, 137.218251, 137.218010, 137.218030, 137.218250, 137.248101, 137.375630, 137.248100, 137.212150, 137.248840, 137.271140, 137.271180, 137.232040, 137.228010, 137.248481, 137.248880, 137.248480
Bestseller No. 6
Sears Craftsman 10" Contractor Belt Drive Table Saw Replacement V-Belt
- Craftsman Table Saw Replacement V-Belt
- 41" Long Type 4L V Belt
- Replaces Sears Part Number STD304410
Bestseller No. 7
Craftsman Belt Drive Table Saw Pulley Set with Keys 315.xxxxx series Arbor & Motor Shaft
- Sears Craftsman Belt Drive Table Saw Arbor & Motor Pulley Set.
- This pulley set is a non-standard pulley and key combination and is intended only for Craftsman 10" Belt Drive Table Saw models 315.228510, 315.228390, 315.228310, 315.228590, 315.228930, 315.228490, & 315.228410. This set will not fit other brands or models
- The pulley is 2 1/4" diameter with a 5/8" bore. The key is 5mm x 5mm.
- This pulley set is a replacement for Craftsman part #, 979900-001, pulley and part #, 979894-001, key.
Bestseller No. 8
Sears Craftsman Motor Armature Bearing Set, 137.xxxxxx Series Motorized Table Saws,RM870 RM871 & RM872 Motors
- Sears Craftsman Motor Armature Bearing Set for 137.xxxxx Series Motorized 10" Table Saws with motors marked RM870, RM871, & RM872.
- The outboard bearing has a 30mm OD, 10mm ID, and is 9mm wide. The inboard bearing has a 32mm OD, 12mm ID, and is 10mm wide.
- These will fit the following models: 137.218240, 137.218020, 137.218780, 137.248830, 137.218040, 137.218041, 137.218101, 137.272220, 137.248850, 137.218100, 137.212920, 137.248250, 137.285540, 137.218251, 137.218010, 137.218030, 137.218250, 137.248101, 137.375630, 137.248100, 137.212150, 137.248840, 137.271140, 137.271180, 137.232040, 137.228010, 137.248481, 137.248880, 137.248480
- Listing is for the bearings only, The last 5 pictures are for application reference only.
Bestseller No. 9
Craftsman 315 Model Series 10" Belt Drive Table Saw Handwheel Handle Crank 12mm Bore Tilt or Elevation Shaft. (Please See Model List)
- This handwheel is for Craftsman Belt Drive Table Saw Models 315.228310, 315.228390, 315.228410, 315.228490, 315.228510, 315.228590, 315.228930, and 315.248200. It will not fit any models not listed..
- 4 1/2" Diameter Handwheel with a 12mm Bore, Fts 12mm round or "D" shaped shafts and attaches with a set screw. Used on the blade elevation and tilt shafts.
- This handwheel attaches differently than the original. The attachment method is detailed in the last three photos
- Replaces Sears Part Numbers: 979918-001, 979918-02 & 977227-002
Bestseller No. 10
Sears Craftsman 10" Contractor Table Saw V-Belt Kit with 2 1/2" Pulley Set & Keys
- Sears Craftsman Belt Drive Table Saw Replacement Pulley and Belt Kit
- 41" Long 4L Type V Belt
- 2 1/2" diameter pulleys with 5/8" keyed bore.
- 3/16" square key for the motor shaft
- 3/16" woodruff key for the arbor shaft
Our Best Choice: Craftsman 315 Model Series 10″ Belt Drive Table Saw Handwheel Handle Crank 12mm Bore Tilt or Elevation Shaft. (Please See Model List)
Our rating:
(4.9 / 5)

[ad_1] This handwheel can be applied to exchange the plastic and slender wall diecast handwheels initially utilized on Craftsman 315.xxxxxx series belt generate table saws: 315.228310, 315.228390, 315.228410, 315.228490, 315.228510, 315.228590, 315.228930, and 315.248200. It will not in good shape any designs not stated. If you have a 113 series belt travel desk noticed be sure to see our other listings for handwheels with 3/8″ and 1/2″ diameter hub bores.
This handwheel is for Craftsman Belt Drive Table Saw Versions 315.228310, 315.228390, 315.228410, 315.228490, 315.228510, 315.228590, 315.228930, and 315.248200. It will not healthy any styles not outlined..
4 1/2″ Diameter Handwheel with a 12mm Bore, Fts 12mm round or “D” shaped shafts and attaches with a set screw. Applied on the blade elevation and tilt shafts.
This handwheel attaches differently than the first. The attachment strategy is in-depth in the last 3 photos
Replaces Sears Section Numbers: 979918-001, 979918-02 & 977227-002
Leave a Reply