When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
Top 10 Best diy co2 generator in 2022 Comparison Table
- ▪CO2 Generator:▪ AS an indispensable role in the photosynthesis of aquatic plants, this CO2 generator main for provides a genuine environment for plants' growing in aquarium.
- ▪Application▪ Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better growing.
- ▪Advantage▪ This CO2 Generator System Kit is with Pressure gauge for pressure display, gas adjustable function, and simple pressure relief, easy to operate, safe, and practical advantages! Once start, sustainable gas supply!
- ▪Material▪ The CO2 DIY kit is with ABS engineering plastic cover, with a locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it's with professional metal material gas adjusting valve to ensure pure CO2 DIY.
- ▪Note:▪ Make sure carefully observe the direction of the parts before assembly; The usual wrong handle way will cause abnormal reaction components as follow: the contrary direction of the check valve and fine-tuning in the direct.
- ✪【High-Quality Material】Be made of aluminum alloy. It is strong, durable and efficient. Well sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions.
- ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included).
- ✪【Bubble counter with check valve】Flow-rate of CO2 gas indication device and prevent water flow back into the bottle.
- ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured. The safety valve supports manual pressure relief. When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe.
- ✪【SATISFACTION GUARANTEE】If you are not completely satisfie, please contact us! We promise give a quick reponse and a nice solution. Choose us, choose quality.
- ▪CO2 Generator:▪ AS an indispensable role in the photosynthesis of aquatic plants, this CO2 generator main for provides a genuine environment for plants' growing in aquarium.
- ▪Application▪ Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better growing.
- ▪Advantage▪ This CO2 Generator System Kit is with Pressure gauge for pressure display, gas adjustable function, and simple pressure relief, easy to operate, safe, and practical advantages! Once start, sustainable gas supply!
- ▪Material▪ The CO2 DIY kit is with ABS engineering plastic cover, with a locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it's with professional metal material gas adjusting valve to ensure pure CO2 DIY.
- ▪Note:▪ Make sure carefully observe the direction of the parts before assembly; The usual wrong handle way will cause abnormal reaction components as follow: the contrary direction of the check valve and fine-tuning in the direct.
- PROFESSIONAL DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, precision needle valve, and easy adjustable bubble counter
- SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold
- NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion)
- OPTIONAL: 12V DC SOLENOID! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long
- ATTENTIONS: Solenoid NOT included, need order separately. Citric acid and sodium bicarbonate NOT included
- ✔ INCLUDES EQUIPMENT NEEDED TO DO IT YOURSELF --- In order to build an effective and efficient pressurized CO2 system, there are a few pieces of equipment that are absolutely necessary. The SunGrow DIY CO2 Generator Set includes two caps (that perfectly fit common PET plastic bottles), needle valve, check valve, a pressure gauge, a 3-way connector and 6 feet of 6mm tubing. You simply have to use 2 carbonated beverage bottles, a reaction material and connect it to a diffuser.
- ✔ GENERATES ESSENTIAL CO2 FOR A HEALTHY HABITAT --- Fish and aquatic pets release cO2 when they take in the dissolved oxygen from the aquarium water and plants absorb that co2. Carbon dioxide is essential to the photosynthesis process and sometimes fish alone do not generate enough Co2. A pressurized DIY CO2 system adds the needed gas to your water.
- ✔ COST-EFFECTIVE & SAFE TO USE --- Instead of spending hundreds of dollars on expensive CO2 diffuser set-ups, save money by creating your own do-it-yourself CO2 generator. The basic principle behind the pressurized CO2 diffuser kit is to create a continuous supply of pure carbon dioxide by causing two different liquids to create with one another. The DIY solution is a cost-effective and satisfying way to add essential CO2 into your aquarium water.
- ✔ EASY TO READ, SPECIALIZED PRESSURE GAUGE --- The SunGrow DIY CO2 Generator Set comes complete with a high-quality, specialized pressure gauge. The metal pressure gauge clearly shows the level of CO2 gas on a scale which indicates a safe area. An accurate CO2 reading gives you the chance to make adjustments or relieve pressure before there are any negative effects on your aquarium inhabitants.
- ✔ CREATE HOMEMADE DRINKS AS AN ADDED BONUS --- Obviously the DIY Pressurized CO2 Kit is designed to add and control the amount of CO2 available to your fish and plants, but there is a bonus to creating your own CO2 generator. Instead of using baking soda or vinegar as your reaction material, use yeast and grape juice (or yeast and malted barley) to create homemade wine and beer.
- The CO2 DIY kit is with ABS engineering plastic cover, with locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it's with professional metal material gas adjusting valve to ensure pure CO2 DIY
- According to the pressure principle,to push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous PURE carbon dioxide
- This CO2 Generator System Kit is with Pressure gauge for pressure display,gas adjustable function,and simple pressure relief, easy to operate, safe and practical advantages! Once start, sustainable gas supply!
- Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better growing.
- ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions.
- ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle.
- ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured.
- ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe.
- ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily.
- Packing Include:1 x CO2 System DIY Kit (Accessories: 1*Pressurized Gauge ,Full Set Air Hose , 1*Bubble Counter , 1*Suction Clips ,1*DIY CO2 Diffuser Plug)
- Well Designed: Simple to create pure CO2 constantly by chemical reactions. Full Copper Needle Valve,Professional Pressure Gauge.A Bubble Counter with A Check Valve Displays The Fluval Rate of The CO2 Gas And Prevents Water From Flowing Back Into The Bottle. You can view the operating instructions on the A+ page
- Safty: Equappied with safty valve When The Pressure Is Greater than 4 kg, The Pressure Is Automatically Released. The Carbonated Beverage Bottle Can Withstand A Pressure of 8 kg to Ensure Your Safety.
- Multifunction : Add Citric Acid, Baking Soda, And Water to The Bottle to Produce Carbon Dioxide. This Allows The Plant Metabolic Rate to Increase Rapidly You Can Also Use Yeast And Grape Juice to Make Homemade Wine!
- We Gurarntee:For Any Reason You're Not Completely Satisfied, You Can Ask for A Replacement Or Full Refund.Just Use It with Confidence!
- The DIY CO2 Kit provides an excellent method of deploying the citric acid / baking soda solution to generate CO2 for plants' growing in the aquarium. Easy to operate and designed for low cost planted tank use.
- Highlight: A quick reaction test tube simplifies the procedure and achieves a fast reaction. 1 SECOND QUICK REACTION, works immediately, almost no waiting.
- Green body using high-quality PC material (bulletproof glass material), injection moulding. Extremely durable, corrosion-resistant, and not easily clogged. The transparent design clearly shows the flow of citric acid. Multifunctional: Two holes in the middle are designed to hang trimming tools for water plants.
- Equipped with a safety valve that automatically relieves pressure when exceeds 4 kg/cm², and it also supports manual adjustment. The magnetic acid absorbing ball makes it more convenient to control acid consumption. Brass micro-adjustment valve, more accurate adjustment, more durable. Detachable design, easy to clean, no longer worried about clogging.
- Our CO2 Generator Kit includes most of the accessories. You only need to prepare yourself: 2 additional carbonated beverage bottles (preferably for 2L), e.g. Coke or Sprite; reaction materials: baking soda and citric acid; check valve and CO2 diffuser.
- Professional CO2 generator system with stainless steel bottle, far better than simple plastic bottle generators: more reliable, steady, durable, efficient.
- You can use the solenoid valve with a timer to synchronize with the light. Also we have a manual version, you can search for it with keywords WuyouChy CO2 Generator.
- The bottle body adopts SUS304 stainless steel, and the Safety Valve will open automatically when it is over the safe pressure.
- All accessories (except reactant) you need are included: Steel Bottle, Tertiary Filter, Pressure Reducing Valve, Pressure Gauge, Safety Valve, Fine Adjusting Valve, Bubble Device, Solenoid Valve, Check Valve, Diffuser and Tube. Also you can get extra accessories and replacement parts (Solenoid Valve, Stand Base, Main Valve, Diffuser) by searching WuyouChy.
- [Tips: ]1, To avoid regulator threads sticked to tank threads, clean their threads before refilling and use a funnel. 2, Large amount of CO2 may cause fish dead. It is recommended to reduce the CO2 volume at the beginning, 1 or 2 bubbles per second. One reaction can last for 3 to 4 weeks.
Our Best Choice: Clscea DIY CO2 Generator System Kit with Safety Valve for Aquarium Plants Integrated Design
(4.4 / 5)[ad_1]
Product Description
Injection moulding body
High-quality PC material (bulletproof glass material). Extremely durable, corrosion-resistant, and not easily clogged.
The transparent design clearly shows the flow of citric acid.
Multifunctional: Two holes in the middle are designed to hang water plants trimming tools.
Quick-reaction test tube
A special test tube for accelerating the reaction, much easier and more convenient.
Pressure gauge with relief valve
Pressure gauge with safety indication, clear to read.
Safe to use with the pressure relief valve that supports manual adjustment.
Magnet + Acid absorbing ball
More convenient to control acid consumption and solve problems such as acid accumulation, unstable pressure, high-pressure value, etc.
The magnet is put outside the bottle of citric acid to suck it together with acid absorbing ball in the citric acid bottle. You can move it up and down to control the flow of citric acid.
Comparison for air output and service time
Note: The best air flow rate when using this product: ≤ 1 second 1 bubble, more than this output volume, the raw material consumption will be too fast, and then the use cycle becomes shorter.
DIY CO2 GENERATOR SYSTEM KIT:
Citric acid + baking soda + water=CO2
Note：
For nano planted tanks.
Ensure to use carbonated beverage bottles, such as Coca-Cola bottles, 2L is the best.
Please read the user manual before use, incorrect operation may fail to produce CO2 properly.
PACKAGE INCLUDED:
1 x generator body Kit
1 x magnet
1 x 1.6m/5.2ft CO2 tubing
2 x extra O-rings
1 x switch valve
1 x quick-reaction test tube
1 x user manual
Type
CO2 Plastic Bottle Generator
CO2 Plastic Bottle Generator
CO2 Cylinder Generator
CO2 Cylinder Generator
CO2 Cylinder Generator
CO2 Cylinder Generator
Allowable reaction materials
(200g citric acid + 600ml water) + (200g baking soda + 200ml water)
(200g citric acid + 600ml water) + (200g baking soda + 200ml water)
200g citric acid +200g baking soda + 300ml water
200g citric acid +200g baking soda + 300ml water
400g citric acid +400g baking soda + 600ml water
400g citric acid +400g baking soda + 600ml water
Allowable using pressure
0~3kg/m² (0~42psi)
0~3kg/m² (0~42psi)
0~25kg/m² (0~355psi)
0~25kg/m² (0~355psi)
0~50kg/m² (0~710psi)
0~50kg/m² (0~710psi)
Automatic pressure relief value
≈4kg/cm² (57psi)
≈4kg/cm² (57psi)
≥40kg/cm² (570psi)
≥40kg/cm² (570psi)
≥80kg/cm² (1138psi)
≥80kg/cm² (1138psi)
On/Off Valve
Manual Switch valve
Manual Switch valve
Manual Switch valve
Solenoid switch valve
Manual Switch valve
Solenoid switch valve
Burst pressure (Cylinder/bottle)
≈8kg/cm² (113psi)
≈8kg/cm² (113psi)
≈150kg/cm² (2133psi)
≈150kg/cm² (2133psi)
≈180kg/cm² (2560psi)
≈180kg/cm² (2560psi)
Package Dimensions : 7.36 x 5.28 x 1.85 inches; 11.36 Ounces
Date First Available : March 8, 2022
Manufacturer : Clscea
ASIN : B08Y8B83G4
Highlight: A quick reaction test tube simplifies the procedure and achieves a fast reaction.
Green body using high-quality PC material (bulletproof glass material), injection moulding. Extremely durable, corrosion-resistant, and not easily clogged. The transparent design clearly shows the flow of citric acid. Multifunctional: Two holes in the middle are designed to hang trimming tools for water plants.
Equipped with a safety valve that automatically relieves pressure when exceeds 4 kg/cm², and it also supports manual adjustment. The magnetic acid absorbing ball makes it more convenient to control acid consumption. Brass micro-adjustment valve, more accurate adjustment, more durable. Detachable design, easy to clean, no longer worried about clogging.
Our CO2 Generator Kit includes most of the accessories. You only need to prepare yourself: 2 additional carbonated beverage bottles (preferably for 2L), e.g. Coke or Sprite; reaction materials: baking soda and citric acid; check valve and CO2 diffuser.
Leave a Reply