When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best dust collector hose in 2023 Comparison Table
SaleBestseller No. 1
FULTON 4" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
- Ideal for sawdust collection and fume ventilation in woodworkng applications
- Good abrasion and tear resistance
- Excellent chemical resistance
- Extremely flexible
Bestseller No. 2
Yellowhammer Dust Management Deluxe Ultra Clear Flexible Wire Reinforced PVC 4 Inch x 10 Foot Dust Collection Hose with 2 Each Key Hose Clamps
- HEAVY DUTY HOSE: No collapse, tear or kink heavy duty PVC wire reinforced hose that can easily be grounded.
- FLEXIBLE: Ultra Flexible Tight Bending Radius allows the user to easily outfit workshop and maneuver the hose(s) anywhere in the shop!
- CLEAR: Ultra Clear PVC Hose allows the user to easily spot debris and other obstructions in your Dust Collection System.
- CONVENIENT: Comes with 2 each Key Hose Clamps allowing you to plug right into your Dust Collection System!
- GUARANTEE: 100% Satisfaction guaranteed or your money back!
Bestseller No. 3
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
- When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
SaleBestseller No. 4
4" x 50' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW377
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
SaleBestseller No. 5
POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet), Flexible Clear View Heavy Duty PVC Hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications
- Includes (one) clear flexible hose - 20 feet long 4" Diameter
Bestseller No. 6
POWERTEC 70196 PVC Dust Collection Hose (4 Inch x 50 Feet) | Flexible Clear View Heavy Duty PVC Hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications
- Includes (one) Clear flexible hose - 50 feet long 4" Diameter
Bestseller No. 7
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
- When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
Bestseller No. 8
POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers, Black
- PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter
- INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter
- APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris
- VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. Compatibility: Fits in vacuum ports that the O.D is 1-1/2", I.D is 2-1/4" or 2-1/2", and connects to the dust extraction ports of power tools that the O.D is 1"
- DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter 2-1/2" O.D | ABS vacuum dust hose adapter 2-1/4" O.D | Small pliable plastic fitting 1" I.D | Large pliable plastic fitting 1-1/2" I.D
Bestseller No. 9
4" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW376
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
Bestseller No. 10
HOSOM 2 1/2" x 20' Dust Collection Hose, Work for Woodshop Dust Collection System and Shop Vacuum System, Anti-Collapse and Heavy Duty
- 【Wide Application】Widely used in workshop dust and debris control, an ideal PVC hose for woodshop dust collection system and shop vacuum system.
- 【Size】ID: 2-1/3", OD: 2-1/2", Length: 20'
- 【Anti-Collapse】Reinforced with the steel cord to prevent the hose from collapsing, and it is clear to see if there are any clogs
- 【Material】 Made from premium PVC material, soft enough to cut to different desirable length
- 【Package】Includes 1 clear vue hose and 2 key hose clamps to lock the dust hose tightly
Our Best Choice: Festool 500680 Suction Hose D 27/32×3
Our rating:
(4.8 / 5)
(4.8 / 5)[ad_1] The new suction hose: Smooth elastic, conical – with smooth outer skin for significantly enhanced managing, a more time provider lifestyle and elevated suction ability. It can be extended to meet your person demands by connecting two suction hoses. The new cleantec extraction sleeve guarantees a safe in good shape on the software.
Strong, sleek outer pores and skin prevents the suction hose from turning into caught
Inner, particularly elastic suction hose for optimum overall flexibility
The cleantec extraction sleeve securely connects the suction hose and electric power resource with bayonet fitting
The first piece and end piece of two suction hoses can be linked by inserting 1 into the other, hence reworking two hoses into a solitary lengthy a single
The initial piece and conclusion piece of a hose can be slotted with each other for transportation – this keeps any remaining dust in the hose
Leave a Reply