When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated fein grout blades in 2022 Comparison Table
Bestseller No. 1
Fein StarLock Carbide Segmented Blade for Defective Tile Grout Removal - Extra Thin, 2-15/16" Diameter - 63502125210
- 3" Diameter 1/16" wide for thin grout lines
- Porous concrete and epoxy's with a long life
- Segmented blade has one flat side so you can cut corners or adjoining surfaces
SaleBestseller No. 2
Oscillating Tool Blades, HEMUNC 4PCS Oscillating Multi Tool Diamond Saw Blades For Grout Removal, Flush Cut, Compatible with Dewalt Bosch Dremel Rockwell Makita Fein Multimaster Milwaukee and more
- ✔Super Value Grout Removal Tool: contains 4 pcs 1-3/8 Inch flush cutting diamond oscillating blades, with diamond coating for long life in tough applications.
- ✔ Wide Application: perfect grout removal blade for oscillating tool, can be used for cutting thinest mortar, plaster walls, cement board, mortar, trimming cement etc.
- ✔ Unique Design:The straight and thin design makes HEMUNC diamond oscillating tool blades perfectly fit into tight spaces that other oval grout blades can't. It can achieve application like finishing the installation of electronics and cutting through grout, cement board and even concrete, digging out a grout job on a tile floor around some door frames, cutting panel to install outdoor outlets, etc.
- ✔ This oscillating diamond blades can be used to clean up the mortar before fixing which is the carbide oscillating saw blades can't achieve.
- ✔ HEMUNC universal quick release system makes it compatible with most brands of oscillating multi tools in the market, such as Dewalt,Miwaulkee,Makita,Ryobi, Ridgid, Fein Multimaster, Chicago, Craftsman, Porter Cable, , Rockwell, Bosch, Genesis, Worx, and More. If HEMUNC oscillating grout removal tool can't match the tools you already have , please feel free to contact us, we will solve your problems immediately.
SaleBestseller No. 3
XXGO 8 Pcs Oscillating Multi Tool Diamond Segment Swing Grit Grout Blades XG8001S
- Best for Grit Grout Removal
- Diamond Material,Universal & Quick Release
- Pack of 8 Pcs Diamond Segment Grout Oscillating Tool Blades
- Not Compatible with Bosch GOP40-30, Bosch Starlock 12V / 18V, Dremel Multimax MM40 / MM45 / MM50, Fein FMM350QSL and Black and Decker
- Compatible with Bosch, Chicago, Craftsman, Dremel,Fein, Harbor Freight, Makita, Milwaukee, Porter Cable, Ridgid, Ryobi, Rockwell, WEN and More
SaleBestseller No. 4
24-Piece Oscillating Multi-Tool Saw Blades and Accessories Set, Multi-Tool Accessory Kit, Attachments for Makita, Milwaukee, Fein, Worx, Ridgid, Ryobi, Harbor Freight, and More
- ENHANCE THE VERSATILITY: Equip your oscillating multi-tool to do more with this 24-piece accessory set. It includes cutting blades for wood, drywall, and metal, a carbide blade, scraper blade, sanding pads, carbide grout removal rasp, and more tools to handle most tasks.
- AFFORDABLE QUALITY: Get durable oscillating saw blades without breaking the bank. You’ll love the quality of these oscillating tool accessories. Unlike other oscillating multitool blades that easily dull, we’ve crafted ours using premium steel to withstand it all.
- HANDLE ANY JOB: Whether you’re sanding hardwood, doing some tile or floor work, removing paint, grinding cement, dabbling in some carpentry, or looking to cut through wood, plastic, metal, or drywall, you’ll find the right tool in this oscillating accessory kit.
- WIDE COMPATIBILITY: These oscillating tool attachments are a perfect fit for the Makita Multitool (XMT032), HFT oscillating tool, Fein Multi Master Pro, Milwaukee M18 multi tool, Worx WX628L/665L, Ridgid JobMax, Porter Cable, Harbor Freight Chicago electric tool, Ryobi multitool, and Genesis Pro among others.
- NOT COMPATIBLE WITH: Quick change or blade quick release tools, Dewalt DCS355, Dremel MM40/45, Worx 20V Max, Worx wx682.9, Black & Decker BD Matrix, and Rockwell Sonicrafter models. Get your set and experience the versatility.
SaleBestseller No. 5
Fein Diamond Segmented Saw Blade for Removal of Marble, Epoxy Resin and Pozzolan Grouts - StarLock Mount, 2-15/16" Diameter - 63502114210
- HIGH-QUALITY - It has an excellent service life, very clean cut and outstanding work performance. It is made from the highest quality metal materials to provide users with exceptional results.
- VERSATILE - This segmented saw blade gives the fastest work progress and maximum precision for the removal of marble, epoxy resin and pozzolan grouts with increased service life and robustness.
- FEATURES - It has the Fein StarLock mounting system and fit every popular multifunction tool on the market.
- THE PERFECT ATTACHMENT - Every Fein multitool blade, saw blade, adapter, sanding pad, and other attachments are designed with the highest quality material and manufacturing.
- TRUSTED BRAND - Fein is famous as a globally active company with German roots that stands for innovative and high-quality power tools and accessories, created for the toughest jobs in the industry to achieve ultimate performance.
Bestseller No. 6
XXGO 4 Pcs Oscillating Multi Tool Diamond Segment Swing Grit Grout Blades XG4001S
- Best for Grit Grout Removal
- Diamond Material,Universal & Quick Release
- Pack of 4 Pcs Diamond Segment Grout Oscillating Tool Blades
- Not Compatible with Bosch GOP40-30, Bosch Starlock 12V / 18V, Dremel Multimax MM40 / MM45 / MM50, Fein FMM350QSL and Black and Decker
- Compatible with Bosch, Chicago, Craftsman, Dremel,Fein, Harbor Freight, Makita, Milwaukee, Porter Cable, Ridgid, Ryobi, Rockwell, WEN and More
Bestseller No. 7
Oscillating Tool Blades, HEMUNC 6PCS Oscillating Multi Tool Diamond Saw Blades For Grout Removal, Flush Cut, Compatible with Dewalt Bosch Dremel Rockwell Makita Fein Multimaster Milwaukee and more
- ✔Super Value Oscillating Diamond Saw Blades Accessory Kit: contains 6pcs 1-3/8 Inch flush cutting diamond oscillating blades, with diamond coating for long life in tough applications. Equipped with 2pcs adaptors for fitness with more branded oscillating multitool.
- ✔ Wide Application: perfect multitool blades for grout removal, cutting thinset mortar, plaster walls, cement board, mortar, trimming cement and grout.
- ✔ Unique Design:The straight and thin design makes HEMUNC diamond oscillating tool blades perfect grout removal tool which can fit into tight spaces that other oval grout blades can't. It can achieve application like finishing the installation of electronics and cutting through grout, cement board and even concrete, digging out a grout job on a tile floor around some door frames, cutting panel to install outdoor outlets, etc.
- ✔ This Oscillating Multi Tool Diamond Saw Blades can be used to clean up the mortar before fixing which is the carbide oscillating saw blades can't achieve.
- ✔ The univesal quick release systerm makes it compatible with most brands of oscillating multitools in the market, such as Fein Multimaster, Ryobi, Milwaukee, Chicago, Craftsman, Dewalt, Dremel, Makita, Porter Cable, Ridgid, Rockwell and More. If the flush cut diamond blades you bought can't match the tools you already have , please feel free to contact us, we will solve your problems immediately.
Bestseller No. 8
HEMUNC 26 Diamond Carbide Oscillating Multitool Quick Release Saw Blades Tile Repair Set Compatible with Dewalt Fein Multimaster Porter Cable Bosch Dremel Ridgid Makita Milwaukee Rockwell
- ✔Super Value Oscillating Tool Blades Accessory Tile Repair Kit: contains 1pc 2-1/2" semi-circular diamond oscillating blade, 1pc 3-1/2" semi-circular diamond oscillating tool blade, 2pcs diamond swing multitool blades, 1pcs triangle carbide rasp oscillatng blade, 1pcs finger carbide multitool blade, tile spacers 1/8 & 1/16 each 10pcs. All type of the multitool blades are the best choice for sanding and shaping on fillers, tile adhesive, concrete, masonry, motar and notching ceramic tiles.
- ✔There are 2 sizes of semi-circular Diamond Oscillating Multitool Quick Release Saw Blades included in the oscillating accessory kit :2-1/2" & 3-1/2"---The half moon shape is ideal for corner work; plus 2pcs of diamond swing oscillating multitool blades which is best for grit grout removal.
- ✔ The Triangle oscillating multi tool carbide blade is featuring an extra large carbide grit for a durable grinding surface, ideal for replacing hardwood floors, cutting trim and other grinding projects; the narrow finger carbide oscillating tool blade is ideal for detail work in corners and small, tight spaces as well.
- ✔ The included 20 tile spacers, 1/8 & 1/16 each 10pcs help you install floor or wall tiles with professional-looking results. The spacers are put between the tiles, and guarantee the equal distance of the tiles, suitable for spacing of floor or wall tiles.The flexible PVC construction makes it easy to place and adjust the spacers. Easily removed when finished.
- ✔ Notice: This diamond oscillating carbide blades kit do not fit for Black and Decker Matrix, Bosch MXH180B, Bosch GOP40-30, Bosch GOP12V-28N, BoschStarlock, Dremel 6300 models, Fein Multimaster FMM350QSL, Fein Supercut, FeinStarlock,Craftsman Bolt-On mode.
Bestseller No. 9
XXGO 4 Pcs Oscillating Multi Tool Diamond Segment Swing Semi Circle Grit Grout Saw Blades XG4002D
- Best for Grit Grout Removal
- Diamond Material,Universal & Quick Release
- Pack of Diamond Semi Circle and Swing Multi Tool Blades, 2 Pcs Each
- Not Compatible with Bosch GOP40-30, Bosch Starlock 12V / 18V, Dremel Multimax MM40 / MM45, Fein FMM350QSL and Black and Decker
- Compatible with Bosch, Chicago, Craftsman, Dewalt, Dremel,Fein, Harbor Freight, Makita, Milwaukee, Porter Cable, Ridgid, Ryobi, Rockwell, WEN and More
SaleBestseller No. 10
6pcs Universal Carbide Oscillating Saw Blades, HEMUNC Mixed Multitool Saw Blades Semicircle Triangular Finger Kit for Tile Grout Mortar Concrete Masonry
- ✔The Oscillating Multitool Carbide Grit Finger Rasp Blade with Universal Fit System is a great multitool blade attachment for handling coarse sanding and shaping on fillers, tile adhesive, concrete and soft stone. The narrow blade is ideal for detail work in corners and small, tight spaces.
- ✔The Oscillating Multitool Universal Fit Carbide Grit Semicircle Blade allows you to cut into concrete and defective tile joints with its brazed carbide grit.
- ✔ The oscillating Multitool Triangle Carbide Rasp is ideal for cutting trim and other grinding projects. The triangle edge makes it easy to sand in corners or tight areas that other blades can't reach.
- ✔ Our carbide oscillating saw blades are compatible with many oscillating tools including Fein Multimaster, Bosch, Dremel, Ryobi, Hitachi, Chicago, Mastercraft, Milwaukee, Ridgid, Black & Decker, Rockwell, Dewalt, Einhell, Porter Cable, Craftsman and more.
- ✔ There are 3 types and 6pcs carbide oscillating tool blades, which are suitable for cutting and grinding objects like concrete, grout, tile, ceramic and masonry etc.
Our Best Choice: Fein StarLock E-Cut Universal Reciprocating Saw Blade for Wood, Drywall and Plastic – 1-1/8×2-1/4″, 3-Pack – 63502222270
Our rating:
(4.3 / 5)
(4.3 / 5)[ad_1] Bimetal with wavy universal toothing. Wide software spectrum for sheet steel up to 5/64 in [2 mm], aluminum profile, copper pipes, wood, plasterboard and plastics. Extensive, waisted form for exceptional cutting pace and excellent swarf removing.
Is Discontinued By Maker : No
Offer Proportions : 7.72 x 3.7 x 1.1 inches 3.35 Ounces
Day First Accessible : November 19, 2016
Manufacturer : Fein
ASIN : B01N77C9YB
Superior-Top quality – The electricity instruments are built of bimetal that offers remarkable company existence, really clear slash and outstanding operate efficiency.
Multipurpose – The e-slice saw blade is extremely robust and wide software spectrum for sheet metallic up to 5/64 in [2 mm], aluminum profile, copper pipes, wood, drywall and plastics.
Universal – Featuring the Fein StarLock mounting procedure, the saw blades in shape each well known multifunction tool on the current market.
Reliable – The hand observed is narrow, waisted form for exceptional cutting speed and fantastic swarf elimination.
Specs – The hand saw has 1-1/8″ width and 2-1/8″ size with StarLock mount.
Leave a Reply