When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated forney plasma cutter in 2022 Comparison Table
- CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
- EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
- DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
- RUGGED- All metal case. Built to take the day to day
- FOR USE ON- Mild steel, stainless steel, aluminum, and copper to 5/8” (15. 88mm) with ease!
- DUAL-VOLTAGE- Equipped with dual-voltage 120V/230V input power and adapter
- POWER- Output power on this Plasma Cutter is 120V: 15A -16A and 230V: 15A- 40A
- CUTTING ABILITY- This machine features a maximum recommended clean-cut capacity of 1/2" and maximum server cut capacity of 3/4"
- Packaging of this item may vary as we transition to our new look.
- Built in Air Compressor
- Cuts faster than oxy fuel
- Smaller heat-affected zone for less warping
- No gas pressure settings for flame tuning needed
- More precise cut, thinner kerf, less slag to clean up
- ▶ ▶About the Gift: we will send it separately,so please contact us after your order. [Cutting Thickness] Reboot cutting machine 20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation
- [Widely Application and Low Cost] This cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture
- [Generator Supported] this RBC-5000D plasma cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V
- [Blowing Back] pre-made 3 seconds of blowing time after you release the torch,to cool down the cutting torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)
- [Warranty] buy this plasma cutter with confidence as Reboot offers 3-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance
- Dual Voltage Plasma Cutting Machine adapts to 110/220V output, high frequency 50/60Hz, 40Amps cutting current ac-dc.10-45amp DC output, 3/10" ideal cut thickness and 3/5" maximum cut thickness under 220V
- The cutting machine adopts IGBT inverter technology, it features with current control, and the energy consumption is greatly reduced. Our machine is suitable to cut stainless steel, alloy steel, mild steel, copper, aluminum, etc
- The weight of the machine is 11.46 lb, the dimension is 12.2 "(L) x 5.6" (W) x 8.7 "(H) . Light and portable, and the top handle design is easy to carry, convenient for you to work with Bestarc Cutting Machine in different places
- Circuit protection against over current, over voltage and low voltage. Air outlet design on the front and back ensures fast and efficient discharge of heat inside the machine, effectively prevents overheating and protect the life cutting machine
- We will provide you with professional service, and guarantee one year warranty. If you have any questions about our plasma cutter please feel free to contact us, we will answer your question ASAP
- 🛒[Pilot Arc] cutting without touching the metal,can efficiently cutting through rough/painted/rusty metals, and produces minimal slag. Better cutting quality and longer consumable life【30A breaker suggested for 220V, 50A breaker suggested for 110V】
- 🛒[Cutting Thickness] 20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation
- 🛒[Wildely Application and Low Cost] available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture
- 🛒[Generator Supported] this RBC-5000DL plasma cutter works well with a generator,but we suggest a 5000W above generator. air pressure 60-70psi.
- 🛒[Warranty] buy this plasma cutter with confidence as Reboot offers 3-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance
- Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting
- Max cutting thickness 14mm ,10mm quality cutting thickness in [email protected] 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm
- Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life
- Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine
- The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room
- MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine
- EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly
- CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 - 23V. Rated output current range- 43 - 110A. Full output curren range- 10 - 140A
- RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly
- WELDER INCLUDES- 10' MIG gun, 8' electrode holder, 8' ground clamp, Integrated handle with torch wrap, 20A - 15A adapter and one additional .030" contact tip. Backed by a 12-month warranty
- CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
- CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
- 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
- CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.
- ★ Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set
- ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
- ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)
Our Best Choice: Forney 85677 Plasma Cutter Consumable Kit for Forney 303 (22 Piece)
[ad_1] Kit Contents: 10 cutting tips (.9mm), 3 electrodes (.65mm) and 2 shield caps for 40 Amp cutting.
The Package Length of the Product is 5.588 centimeters
The Package Width of the Product is 6.096 centimeters
The Package Height of the Product is 15.24 centimeters
Country of Origin: ITALY