When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated hammer drill bits in 2022 Comparison Table
- INNOVATIVE: The Bosch HCK001 Drill Bit Set features optimized 4-flute design to reduce bit stress when drilling and for faster dust removal.
- FOR USE: Use with SDS-Plus rotary hammers, delivering optimal hole geometry in a variery of applications including concrete, brick, block and more
- VERSATILE: Ideal for anchoring and through-hole applications in concrete
- LONGEVITY: Bosch-made, carbide-tipped bit heads are harder, tougher and more resistant under heavy loads
- PORTABLE: The included rugged storage case allows for easy access, organizing and portability
- 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four-flute design cleans debris out for fast, efficient drilling
- PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs.
- HIGH QUALITY CARBIDE MATERIAL: It is featured in a harder YG8C Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete.
- UNIVERSAL CONNECTION DESIGH: The SDS - PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. SDS chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove.
- MULTIFUNCTIONAL USING: The bit set includes 13pcs drill bits with 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm (approx. 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8") , 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel.
- CONVENIENT ORGANIZATION AND STORAGE: Come with a plastic index case, convenient to use and carry.
- 8-PIECE SDS-PLUS DRILL BITS - Set includes: 1/4 X 4-inch, 5/16 X 4-inch, 3/16 X 6-inch, 9/32 X 6-inch, 1/4 X 6-inch, 5/16 X 6-inch, 3/8 X 6-inch, 1/2 X 6-inch.
- CARBIDE-TIPPED BIT - LUXEMBOURG IMPORTED, carbide-tipped crown bit heads more stable, harder, more durable, extra-long tool life. The SDS PLUS drill bit will drill holes in concrete faster and easier.
- SPECIAL FLUTE DESIGN - The wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer.
- GROOVES ON SDS PLUS SHANK - The shank has two types of grooves (TOTAL OF FOUR). The smaller grooves fix bit in the chuck. The larger grooves allow bits slipping in the chuck when working, enhancing the drilling torque and hammering energy.
- MULTIPURPOSE - Concrete drill bits set is fully compatible with All SDS-Plus Rotary Hammer Drill, like BOSCH, Dewalt, MAKITA, Milwaukee, etc. Ideal for drilling holes in concrete, brick, stone and masonry.
- Includes 7 commonly used hammer drill bits
- Ideal for use with concrete, stone, and masonry
- Part of Bosch's Blue Granite series
- High-temperature brazing prevents carbide-cutting edge from breaking out
- Softened shanks have ANSI-compliant aggressive gripping power
- Enhanced 4-flute design reduces stress and helps the bit run cooler, and for fast dust removal.
- The concrete drill bits are tipped with durable YG8C tungsten carbide and with 40Cr carbon steel body. They are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry.
- 4pcs chisels included, those are constructed of rugged 40Cr carbon steel, for cutting concrete, asphalt or masonry and bull point chisel for heavy duty concrete breaking.
- The SDS - PLUS shank is suitable for most rotary hammer drill. The bit set includes 13pcs drill bits with 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm (approx. 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8") , 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel.
- Warranty: 12 month return and life time support, money back or new item for replacement.
- The product is 3/4x16x21 SDS Max Bit
- Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
- 3/4" diameter, 16" useable length, 21" overall length
- Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
- ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
- ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
- ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
- ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
- ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
- EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs.
- POWER: With an integral shank, the HC8526 offers better power transmission and is designed to allow smaller hammers to drill larger holes.
- VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block.
- DIMENSIONS: The Bosch HC8526 SDS-max core cutter measures 2-5/8-inches in diameter. The useable length is 17-inches and the overall length is 22-inches.
- SDS-max shank for use with compatible SDS-Max Rotary Hammers
- ✔PREMIUM 17 PCS DRILL BIT and CHISEL SET Professional drill tool set provides the quality for efficient and fast hammer drilling in hard materials like concrete, granite, brick and other similar building materials. The set includes: 13 Hammer Drill Bits (diam) - 5.5 mm, 6 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 10 mm, 14 mm, 10 mm, 12 mm and 16 mm (approx 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8"). 1 Point Chisel 14 x 250mm, 1 Flat Chisel 20mm, 1 Flat Chisel 40mm, and 1 U Gouge Chisel 22mm
- ✔PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND QUALITY Made of premium 40Cr carbon steel with heat treatment improves core strength for maximum durability and extended life. Features YG8 grade Carbide tip for better wearing resistance. The hardened, premium carbide insert tip is strong and stays sharp longer for finer material break up and easier drilling that increases strength and durability. Copper braze material gives high heat resistance for reduced tip loss.
- ✔COMFORTABLE, CONVENIENT AND EFFECTIVE - Drill bits are effective for drilling that achieves precise start and prevents walking. Carbide tip securely embedded in the steel body for faster, safer, easier drilling of exactly the hole size needed that saves time and money. The 4-fold spiral flute (S4) is for rapid drilling, dust removal with even less vibration and more precise guiding. The bits are marked with the Wear Mark to identify when it has worn to an inappropriate levels.
- ✔UNIVERSAL COMPATIBILITY The SDS+ shank is compatible with most standard SDS or SDS-Plus style chucks and hammer drills in the market
- ✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from dill bits and SDS PLUS chisels to fall apart.
Our Best Choice: EZARC 5PC Carbide Tip Multi-Purpose Drill Bit Set Hex Shank Masonry Drill Bit Kit for Metal, Wood, Block, Brick, Tile and Plastic
1/4″ Hex Shank
Top quality Percussion Masonry Drill Little bit
Metal, Brick, Block, Comfortable Tile, Wooden, Plastic, Fiber Cement.
Concrete, Marble, Brick, Block.
Concrete, Marble, Brick, Block.
5/32”, 3/16”, 1/4”, 5/16”, 3/8”.
3/16”(5mm), 1/4”(6mm), 1/4”(6mm), 5/16”(8mm), 3/8”(10mm).
3/16”(5mm), 1/4”(6mm), 1/4”(6mm), 5/16”(8mm), 3/8”(10mm).
Is Discontinued By Producer : No
Merchandise Dimensions : 6.69 x 2.76 x .59 inches 5.93 Ounces
Date Initially Readily available : August 23, 2018
Company : EZARC
ASIN : B07GRV152G
5 items multipurpose drill bits with 6-inch duration in the set: 5/32, 3/16, 1/4, 5/16, 3/8 inch
Sturdy significant-high quality tungsten carbide head provides for a longer period lifetime in multi-supplies like brick, block, tile, fiber cement, wood, plastic and steel
Multi-grind sharp edges produce significant drilling velocity even in challenging resources, execute 85% more rapidly in multi content than normal bits
Large “U” flute style cleans debris out rapid which make it a effective metal and wood drill bits set
Hex shank permits making use of in impactors and hammer drill/drivers for fantastic bit grip