When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated hobart plasma cutter in 2022 Comparison Table
SaleBestseller No. 1
Hobart - 500575 AirForce 27i Plasma Cutter
- Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
- XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
- Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
- Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
- Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
Bestseller No. 2
Hobart AirForce 40i Plasma Cutter, Model:500576
- Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
- XT40R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
- Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
- Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
- Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
Bestseller No. 3
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
- Built in Air Compressor
- Cuts faster than oxy fuel
- Smaller heat-affected zone for less warping
- No gas pressure settings for flame tuning needed
- More precise cut, thinner kerf, less slag to clean up
Bestseller No. 4
Plasma Cutter Pilot Arc CUT50 Dual Voltage 110V 220V 50A Cutting Non Touch Machine Portable Plasma Cutter (CUT50L)
- 1. Non-touch Pilot Arc: it efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag；the technology allows you to cut without touching the tip to the metal. It provides a better cutting quality and longer consumable life
- 2. Input and Output: Dual voltage capability allows the machine to run directly on 110V/220V. plug adapters included, 10-50 A output, 1/2” ideal clean cut and 3/4” maximum severance, Non-HF Blowback Start, there is no HF interference
- 3. Wide Applications: Suitable for cutting stainless steel, alloy steel, mild steel, copper, carbon steel and aluminum, and other metals. Can be widely used at demanding industrial and construction work, or home and hobby us
- 4. Setup Easily: The air regulator and water trap is a combined unit mounted at the back machine,the whole machine can be setup very quickly, and it is to reduce the chance of water entering the plasma torch
SaleBestseller No. 5
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown
- ★ NON-TOUCH PLASMA CUTTER: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
- ★ TIG WELDER: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal NOT Included).STICK/MMA WELDER: 15-200AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape;
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand back on our products. Please submit the registration form on our website.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". PACKAGE INCLUDES: Power supply, Plasma cutting torch, Tig torch, MMA/Stick clamp, Ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, Consumables, Instruction Manual, etc. To buy the compatible Argon Regulator, please search Lotos AR03 or Lotos AR04
- ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min. DUAL VOLTAGE INPUT: Automatic Dual Voltage:110V-125V, Signle Phase, 50/60Hz @ 40 A input, 215V-250V, Signle Phase, 50/60Hz @ 35 A input. Recommend Circuit Breaker Size: 50 AMP @ 120V and 40 AMP @ 240V.
Bestseller No. 6
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
SaleBestseller No. 7
YESWELDER CUT-55DS, 55 Amp High Frequency Non-Touch Pilot Arc Digital Plasma Cutter, DC Inverter 110/230V Dual Voltage Cutting Machine
- NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- Less cleaning, maintenance, noxious gases, and less fire hazard. You have simply less overall work and a better, cleaner cut.
- 10-55 A DC output, 1/2" ideal clean cut and 3/4" maximum severance cut under 220/240V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- Optimized design based on state-of-the-art IGBT transistors provides high power output for thick metal, as well as steady output for thin metal
- The High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the work piece.
Bestseller No. 8
Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp
- CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
- EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
- DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
- RUGGED- All metal case. Built to take the day to day
Bestseller No. 9
Miller Electric 907529 Plasma Cutter, Inverter, Spectrum 375
- Occupational Health & Safety
- Country of Manifacturer: United States
- Manufacturer: Miller Electric
Bestseller No. 10
FLARING Plasma Cutter Machine Pilot Arc 50 AMP 110/220V FL550D Non Touch 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine
- 【Non-Touch FL-550】Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality and longer consumable life.(Breaker Recommendation:50A on 110V,30A on 220V)
- 【Cutting Ability】10-50A dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220V. 10-35A DC output,1/3" ideal clean cut and 2/5" maximum severance cut on 110V. Work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome
- 【Advanced IGBT Inverter】Save energy and noiseless, high cutting speed,cutting smoothly. The conversion line is easy to transfer from input 110V to 220V dual-frequency (110/120V 220/240V 50/60hz). Air pressure 60-70psi recommended.
- 【Safe Design】Built-in over-heat,over-voltage protection,it is under-voltage protection.It is not only can be suitable for businesses and DIY users but also fully accommodating the demands of professional operators.
- 【Warranty Assurance】We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,3 year's warranty.Please add to cart and take it without hesitation
Our Best Choice: Hobart AirForce 40i Plasma Cutter, Model:500576
Our rating:
(4.7 / 5)
(4.7 / 5)[ad_1]
From the producer
Dual-voltage functionality with MVP (multi-voltage plug)- lets you to hook up to frequent 120 or 240 V electric power receptacles with out the use of any tools – simply just choose the plug that fits the receptacle.
XT40R torch- Made for elevated comfort and ease with an ergonomic set off safety, extra productive cooling and cost-effective replacement cutting recommendations
Lover-on-demand from customers- cooling system operates only when desired reducing electricity usage and contaminants drawn into the device.
Energy issue correction (PFC) circuitry – Draws up to 30% significantly less amperage for the similar reducing variety as as opposed to the competitors. PFC expands operators perform region via extension wire, though minimizing nuisance circuit breaker journeys prompted by voltage drops.
Postflow cooling circuit – Extends existence of consumables and torch by cooling them with postflow air after bring about is introduced.
Leave a Reply