When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated in ground pool ladders in 2021 Comparison Table
- 3-steps make for an easy to climb ladder
- White, polymer coating made to look clean cut and protect from harsh inground pool elements
- Saftron ladder built to remain cooler to the touch when exposed to sun-rays
- Reinforced steel interior provides extra strength and durability
- Long-lasting ladder meant to maintain their smooth, bright finish for years
- 【Stainless Material】This ladder is made by high quality stainless material which could let this item would not stain in the swimming pool and would not pollute the water in the swimming pool.
- 【Non-slip Footstep】Thoughtful non-slip footstep which could protect your safety while you wanted to start your swimming or finished your swimming. And it could give you more stability.
- 【Easy to Assemble】This product has straight forward illustrations and descriptions. Every screw and pin has its own code and it's easy to understand the assemble progress. It won't take you much time and could save your energy.
- 【Perfect Detail Workmanship】High quality iron wire connecting procedure which could make this cage more durable and solid. And the structure follows the scientific principle and is strong enough to hold cats to play.
- 【Solid Structure】This rack is made by solid pipe construction with. Structured with heavy-duty material for extended durability, and the structure follows the scientific principle and is strong enough to hold various things. It's sturdy and solid for long time and durable usage.
- Premium Stainless Steel Material: Featuring 20" wide electro-polished 304 stainless steel rails and 3 anti-slip footsteps with ends flared to 1.9" outside diameter, this pool ladder is easy to replace in existing pools. More, the premium stainless steel tubes won't pollute the water in the swimming pool, so you can use the ladder with confidence.
- Non-slip Footsteps for Safety: This in-pool 3-step ladder is the perfect replacement for your old above-ground pool ladder, helping you to enter and get out of the swimming pool effortlessly. Besides, each step is designed with anti-skid rubber pads to add friction so as to prevent you from slipping while getting in or out of the pool.
- Sturdy Structure & Joints: Each part of this 3-step pool ladder is tightly connected to form a stable structure with a maximum bearing capacity of 265 pounds. In addition, the easy-to-install legs and rotatable buffer units provide strong adsorption capacity and high impact resistance during use.
- Perfect for Various Pools: This 3-step stainless steel pool ladder is suitable for both commercial and private use, which can be used in outdoor bath pavilion, indoor swimming pools, open-air bath, water park and more. Moreover, the ladder features ergonomic handrails for a comfortable and safe grip to enter and exit your pool.
- Easy to Assemble & Maintain: This swimming pool ladder comes with complete parts, hardware and clear instructions for easy assembly. You can complete the assembly work in a short time by following the instructions. What's more, the smooth polished surface enjoys high gloss and is easy to maintain.
- Product Type: Ladder
- Package Dimensions: 130.81 L x 66.802 W x 12.7 H (centimeters)
- Country of Origin: China
- Package Weight: 18.6 pounds
- IN-POOL LADDER: Aluminum rail and resin step pool ladder use in-ground or above ground pools with a wall height of 60 inches. 300-pound weight capacity on each step guarantees it can hold up for years
- DESIGN: Ergonomic, 31.5-inch tall aluminum handrails and 11.75 -inch rise between steps allow you to ease into the water comfortably
- DURABLE: Heavy-duty premium resin material resists corrosion to stand up to water and the elements
- EASY INSTALL: Prefabricated parts snap together making assembly and installation simple for any pool owner
- ADDED SAFETY: Bottom tread sits above the anti-slip base that can be bolted to the pool surface
- OUT WITH THE OLD IN WITH THE NEW - Enter and exit your pool without a hassle. This is the perfect ladder to replace your old inground pool ladder. Anchors and escutcheons sold separately.
- EASY INSTALLATION – Just remove your old inground pool ladder and insert this new one. No bonding or grounding required.
- STAINLESS STEEL - 20" wide electro-polished aluminum rails and 3 white plastic steps with ends flared to 1.90" outside diameter for easy replacement in existing pools.
- CLOSE FOR COMFORT - All bends have a 6-Inch radius to keep the ladder closer to the pool wall.
- INCLUDES - This stainless steel pool ladder comes with a two-pack of rubber bumpers and a 3 year warranty. If you have a salt chlorination pool, this ladder may show signs of earlier corrosion and is not recommended. It works ideally in chlorinated pools, as it is not salt water friendly. Stainless steel escutcheons plates and anchors are sold separately. * All dimensions will vary within a 1/2 inch as each piece is hand bent at the manufacturer*
- 3 New Hydrotools 87901 molded plastic ladder replacement steps + Steel Bolts Set
- High quality replacement steps and bolts
- Fits most above-ground and in-ground ladders
- Compatible with plastic or stainless steel steps
- Made to fit 1.9" diameter ladders
- EASY ENTRANCE AND EXIT - The Aqua Select 3-Step Ladder with Stainless Steel Steps is the perfect replacement for your old inground pool ladder. Enter and exit your swimming pool without a hassle. Requires stainless steel escutcheon plates that are sold separately.
- DESIGNED FOR SAFETY - This in-ground swimming pool ladder is designed for maximum aquatic safety. Each of the three steps has textured and non-slip rubber grippings and the ladder has rounded handrails for a comfortable and safe grip to enter and exit your pool.
- SUPERIOR QUALITY - This ladder is constructed from stainless steel for a sturdy and durable piece of equipment that will last a lifetime. This ladder has 21" wide electro-polished stainless steel ladders and steps with ends flared to 1.90" outside diameter for easy replacement in existing pools.
- EASY INSTALLATION – Just remove your old inground pool ladder and insert this new one. No bonding or grounding required. This stainless steel ladder is ideal for chlorinated pools and is not recommended for use in salt water swimming pools that may cause corrosion.
- TRUSTED POOL ACCESSORIES - Maintain your swimming pool or spa and surrounding living space with reliable pool accessories and replacement parts that you can trust from Aqua Select. The Aqua Select 3-Step Ladder with Stainless Steel Steps is the premier choice for reliable equipment to keep your swimming pool in shape.
- Reinforced core in key areas for maximum rigidity and strength
- Colors are an integral part of the material and not a paint after-coat, so they will never chip or flake off
- Non metallic composite material does not get hot in the sun.
- Immune to the corrosive effects of Salt Water Chlorinator Systems.
- Non-conductive material conforms to NFPA and building codes without having to ground (bond) the ladder
Our Best Choice: 3 Hydrotools 87901 Pool Rung Ladder Steps + Stainless Steel Bolts Hardware Set
[ad_1] We are an licensed Swimline supplier! Best Good quality Replacement! Fits most in-ground and over-floor ladders! 1 Acquire = 3 Pool Ladder Rung Replacements AND Steel Bolts Set!
3 New Hydrotools 87901 molded plastic ladder substitute methods + Steel Bolts Established
Substantial top quality alternative methods and bolts
Fits most over-ground and in-floor ladders
Compatible with plastic or stainless steel steps
Created to in good shape 1.9″ diameter ladders