When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
- Top 10 Rated kobalt chainsaw 40 volts in 2022 Comparison Table
- Our Best Choice: KAKEI Chainsaw Chain 8-Inch .050″ Gauge, 3/8″ LP Pitch, 33 Drive Links Fits Chicago/Portland, Earthwise, Kobalt, Greenworks (3)
- KAKEI Chainsaw Chain 8-Inch .050″ Gauge, 3/8″ LP Pitch, 33 Drive Links Fits Chicago/Portland, Earthwise, Kobalt, Greenworks
- KAKEI Dependable Chainsaw Chain
Top 10 Rated kobalt chainsaw 40 volts in 2022 Comparison Table
- 40V Brushless chainsaw provides up to 140 cuts of 4x4 wood with a fully charged 4.0 Ah battery (sold separately)
- High efficiency Brushless motor provides more power, quiet operation and longer motor life
- Starts easily every time with the push of a button
- 14-in Bar and chain easily cut through branches and smaller trees
- Auto oiler and tool-free tensioning system provides hassle free operation; Easy tool-less chain tensioning
- BATTERY AND CHARGER NOT INCLUDED
- Get started in seconds without the hassle of gas
- 40-volt Lithium ion battery system for great performance and run time
- Reach of up to 10.75-ft when used at proper cutting elevation
- High Performance G-MAX 40V Lithium-Ion battery delivers fade-free power with no memory loss after charging
- Robust 12-inch steel chain and bar with tool-less chain tensioning offers ease of use while delivering the highest cutting performance
- 3/8-inch chain pitch delivers the right amount of capabilities to get those limbs trimmed and cut with minimal kickback
- Automatic oiler applies oil to bar and chain when needed to ensure durability and optimal use with a translucent oil tank for clear view of oil level. Wrap around handle for multiple cutting positions to provide ease of use when trimming at different angles
- 40V G-Max and 40V Lithium-Ion Batteries are not cross compatible; this tool is compatible with the G-Max 2.0 Ah battery (29462) and the G-Max 4.0 Ah battery (29472)
- UpStart Components 8-Inch Chainsaw Chain Replacement for Kobalt KPS 80-06 Kobalt 40V Polesaw - (8 inch Length, 3/8" Low Profile Pitch, .050" Gauge, 33 Drive Links); Quantity: 6
- High performance chain for smooth cuts. Engineered for precision, balance and safety for efficient cutting.
- Reduced vibration levels for consistent cuts and greater user comfort. Designed for durability to keep the chain sharper longer.
- Avoid injuries by replacing dull or damaged chains with a sharp new chain.
- UpStart Components Brand. Please Note: The same saw can have different bar lengths so ensure you confirm the pitch, gauge, & drive links on your current bar. Not all bars take the same amount of links.
- High performance Kobalt 40-volt Li-ion 4.0ah battery delivers fade-free power with no memory loss after charging
- Long run battery has double the capacity of the 2.0-Ah Kobalt quick charge battery and provides extended run time
- Compatible with the Kobalt 40-volt max team of tools
- Fuel gauge provides an easy check on available power level
- Pitch: 3/8" Low Profile, gauge: .043", narrow kerf, drive link count: 52
- Fits several chainsaw models, including Echo CS-305 and CS-306, Ego CS1400 56V, Husqvarna 436Li, 536Li XP, T536Li XP, and Ryobi RY40502 and RY40511. See back of packaging for more details.
- LubriTec Lubrication System keeps your saw chain and guide bar oiled, for less friction and longer life. For saw sizes up to 42 cc
- Top-Plate Filing Indicators make accurate sharpening easier
- This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
- Ditch the gasoline, extension cords and maintenance required with alternative chainsaws
- Brushless motor maximizes both the torque and the lifespan of the unit
- 16-inch Oregon chain runs at speeds of up to 49 feet per second
- Included 40-Volt 4Ah fade-free lithium-ion battery and charger compatible with the entire WEN 40V Max Series
- Backed by a two-year warranty
Our Best Choice: KAKEI Chainsaw Chain 8-Inch .050″ Gauge, 3/8″ LP Pitch, 33 Drive Links Fits Chicago/Portland, Earthwise, Kobalt, Greenworks (3)
(4.6 / 5)[ad_1]
Product Description
KAKEI Chainsaw Chain 8-Inch .050″ Gauge, 3/8″ LP Pitch, 33 Drive Links Fits Chicago/Portland, Earthwise, Kobalt, Greenworks
About KAKEI：
1.First class equipment:
Better Flatness.
Make the sawchain qulity more reliable and more stable.
Greatly improve the printing efficiency of guide bar.
2.Raw material:
Directly imported by Germany.
KAKEI Dependable Chainsaw Chain
Fits models：
Chicago/Portland:
Chicago Pole Saw 68862; Portland 63190 62896
Earthwise:
CCS30008 Pole saw CPS40108, CPVS41008, LPS40208, PS40008
Greenworks:
Pole Saw 20192 Corded 6.5A, 20302 40V, 20352 24V Li-ION, 20612 20V Li-ION, 20672 40V Li-ION, 1400102 24V Li-ION
Kobalt:
Pole Saw 506891 40V, KPS 80-06 40V
Filling indicators
Your sharpening made easier and more accurate.Special filling marks show the best top- plate angle. Lines make it easier for filling the correct top-plate angle and help maintain equal cutter lengths. Filling indicators show you when cutters have reached the end of their life. Cutters should not be sharpened beyond the line.
Blued components
KAKEI Blued Components give you high-quality resistance to corrosion with the presence of protective oil. A precise and controlled tempering process results in a blue surface, designating our unique saw chain.
Japanese technology chrome-plated cutter
Your chain stays sharper, longer. KAKEI electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.
Hardened Rivets
For a longer working saw chain, KAKEI induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.
Chain Length/ inch
10
14
16
18
18
Gauge
.050″
.050″
.050″
.050″
.050″
Pitch/LP
3/8″
3/8″
3/8″
3/8″
0.325″
Drive Links
40
52
56
62
72
◇ PARAMETERS: 8 Inch, .050″ Gauge, 3/8″ LP Pitch, 33 Drive Links The same saw can be equipped with different bar lengths.*Ensure your model has a low profile 3/8″ sprocket. (Please verify your parameters to ensure this chain works with your machine.)
◇FITS MODELS: 【Chicago/Portland】: Chicago Pole Saw 68862; Portland 63190 62896 【Earthwise】: CCS30008 Pole saw CPS40108, CPVS41008, LPS40208, PS40008 【Greenworks】: Pole Saw 20192 Corded 6.5A, 20302 40V, 20352 24V Li-ION, 20612 20V Li-ION, 20672 40V Li-ION, 1400102 24V Li-ION 【Kobalt】: Pole Saw 506891 40V, KPS 80-06 40V
◇ SAFETY: UL approved, meets the ANSI Standards. Semi-chisel with low kickback.
◇ RELIABLE QUALITY: 1. Material: Germany imported steel, high toughness, anti-fracture. 2.Technogoly: Japanese technogoly chrome-plated cutter Your chain stays sharper, longer. 3. Components: KAKEI Components give you high-quality resistance to corrosion with the presence of protective oil. 4. Surface: KAKEI induction hardens and quenches all chiansaw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength.
◇Notice: Besides the models mentioned here, there are others fit for this chain. If you have any problems or concerns about the compatible machines, please feel free to contact us. Besides the models mentioned here, there are others fit for this chain. If you have any problems or concerns about the compatible machines, please feel free to contact us.
Leave a Reply