When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
- Top 10 Rated laminate cutter tool in 2022 Comparison Table
- Our Best Choice: LEVEL5 Skimming Blade Combo, 24″ Blade + 25″ – 36″ Extension Handle | Smoothing/Knockdown Drywall Knife | Extruded Aluminum & European Stainless Steel Construction | High-Impact End Caps | 5-437
- LEVEL5 SKIMMING BLADES & ACCESSORIES
- LEVEL5 Tools is a proud, family-run company based in Kansas City.
Top 10 Rated laminate cutter tool in 2022 Comparison Table
- Product Type : Tools
- Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick
- Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
- Sturdy High-Quality Steel And Aluminum Construction
- BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.
- Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardy plank
- Cuts up to 13” wide
- Angle gauge allows for cuts up to 45 degrees
- Quiet, dust free operation, No electricity required
- For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC, Vinyl Flooring and more， up to 13” wide and 16mm ( 5/8”) thick.
- Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. Installation Kit with Tapping Block, Pull Bar and Spacers (With 20 Spacers)
- 37-1/4" Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use.
- Item Weight 18.7 lbs, DIY For Household and Business, Strong and Durable， Preferred for business！
- For cutting and slitting laminates, melamine and wood veneers
- Strips 12-110 mm (1/2" to 4"), with micormetric measure
- Clean cut to prevent wasting materials with straight guide
- Exchangeable cutting wheels
- Quick adjustment lever and minute precision threaded knob for adjusting strip width and locking nut
- Cuts flooring up to 13" (330mm) wide Pergo. LVP, RCV & Laminate
- Lightweight and portable. Made in the USA with Global Materials
- Moveable fence for 45° (up to 8" / 203mm wide) and 90° cuts
- Cuts laminate and vinyl up to 12mm thick, Cuts engineered wood (up to 10mm thick and 1200 Janka
- Robust, metal-jacketed bearings for enhanced durability - Also improved assembly
- BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.
- Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank
- Country of origin : China
- Angle gauge allows for cuts up to 45 degrees
- Cut where you work - save time walking to and from your saw
- One shear blade outlasts over 20 saw blades
- Dust free/ quiet operation/ no electricity - Cut anytime day or night
- Built-in ruler and movable fence for 45° (up to 9 in. Wide) and 90° cuts
- 9" cutting capacity
- Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 9” wide and 19/32” thick
- Compact and easy to use; produces clean, precision cuts with no splintering and smooth finish
- Sturdy high-quality steel and aluminum construction
- Extended handle for increased leverage
- 13" Cutting capacity
- Sliding extension table supports longer boards (41" Working length)
- Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank, cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
- 28-1/2" Handle for increased leverage
- Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet ($30 value)
- Cut materials up to 9 inches in width. Max rake/angle - 45 degrees on 6 inch board. Make cuts up to 9 inch. wide and 9/16 inch. thick
- Dust free, quiet operation, no electricity - Cut where you work anytime day or night
- One shear blade outlasts 10 or more saw blades
- No assembly required - ready to use
Our Best Choice: LEVEL5 Skimming Blade Combo, 24″ Blade + 25″ – 36″ Extension Handle | Smoothing/Knockdown Drywall Knife | Extruded Aluminum & European Stainless Steel Construction | High-Impact End Caps | 5-437
(4.8 / 5)[ad_1]
Product Description
LEVEL5 SKIMMING BLADES & ACCESSORIES
LEVEL5’s line of drywall skimming blades offer outstanding quality, performance and features. They move mud effortlessly and with high sensitivity, enabling finishers to complete their jobs efficiently with consistent, professional results.
What sets LEVEL5’s skimming blades apart is their ultra-lightweight design. Drywall compound smoothing is a finesse game and the skimming blades, extendable handles and handle adapter in this tool line have been specifically developed and refined through years of feedback from professional finishers.
SUGGESTED USES
Available in eight lengths, there’s a LEVEL5 skimming blade for every drywall finishing job:
7-inch, 10-inch or 14-Inch blades are often used for bedding and wiping down drywall tape after the tape has been applied by hand or using an automatic taper or banjo.
When finishing butt joints or slightly wider areas, 16-Inch, 24-Inch or 32-Inch skimming blades are ideal and will get the job faster vs. smaller trowels or finishing knife.
40-Inch or 48-Inch skimming blades are perfect for smoothing larger areas. Typical examples would include when you spray or roll on compound and smooth to a level 5 finish, or when you are covering up textured ceilings and walls.
1.
The LEVEL5 Skimming Blade profile provides a comfortable, ergonomic grip. The design also allows for one of LEVEL5’s three specialized skimming blade handles to be securely attached with a handle adapter.
2.
LEVEL5 Skimming Blades feature an extruded, aircraft-grade aluminum blade housing. The blade remains rigid and straight, even at lengths up to 4 feet (48 inches).
3.
The adjustment thumb screw enables the skimming blade to be easily adjusted to the optimal angle for any finishing job.
4.
The skimming blade handle adapter is composed of glass-filled composite. This material is very light weight but offers excellent strength and impact resistance.
5.
The handle adapter quickly snaps over the blade housing for a secure connection. To release, simply lift the two quick release tabs.
6.
The LEVEL5 Skimming Blade handle fits securely into the handle adapter, ensuring there is no wobble during use. The handle is secured using button snaps.
7.
The LEVEL5 Skimming Blade handle is manufactured using lightweight but rigid fiberglass and aluminum. An easy-to-use twist lock secures the handle at the desired length.
8.
Unlike typical finishing knives, LEVEL5 Skimming Blade inserts feature a rounded edge that keeps the corners from gouging freshly smoothed drywall compound or paper.
9.
LEVEL5 Skimming Blade inserts are precision crafted using 0.3mm European stainless steel.
10.
LEVEL5 Skimming Blade inserts are easily replaced if damaged or worn (sold separately). They slide into the blade housing for a snug fit. This configuration is more cost-effective than replacing the entire skimming blade.
11.
Composite end caps prevent drywall compound from accumulating (and drying) inside the skimming blade housing. This allows for easy cleanup!
Rigid Aluminum Blade Housings
LEVEL5 Skimming Blades feature aircraft-grade, extruded aluminum housings for maximum rigidity across the blade span.
Extra Reach with an Optional Handle Adapter and One of Three Handle Options
Manufactured using premium fiberglass, aluminum, and high impact ABS composite, LEVEL5’s line of skimming blade handles are extremely lightweight yet robust and rigid – even when fully extended.
The Blade Inserts are Replaceable!
LEVEL5 Skimming Blades feature blade inserts that are easily replaceable if damaged or worn. This means the tool can be renewed at a fraction of the cost of replacing the whole blade.
A Range of Toolset Combinations are Available
LEVEL5 Skimming Blade and accessories can be purchased individually, or in a toolset.
A wide range of toolset configurations are available to suit every situation.
LEVEL5 Tools is a proud, family-run company based in Kansas City.
We have been perfecting our lines of automatic drywall taping and finishing tools and drywall finishing hand tools since 1997. Our extended family includes thousands of professional finishers throughout the USA, Canada and abroad. Their livelihoods depend on the quality, performance, and reliability of the drywall tools they choose to use
PROFESSIONAL GRADE | Designed and built using nearly 20 years of input from professional finishers. Our tools are meant for reliable, daily use on the job site.
PREMIUM QUALITY | Strong and lightweight extruded aluminum black back, 0.3mm high-quality European stainless steel blades
SUITES YOUR NEEDS | Grip with the blade back or attach one of three extendable LEVEL5 Skimming blade handles–whatever fits your finishing style
BUILT TO LAST | Our tools are built for reliable, daily use on the job site
GUARANTEED PERFORMANCE | Our finishing tools are developed by professionals for professionals and guaranteed to exceed your expectations. If for ANY reason you aren’t pleased with your purchase, returns through Amazon are easy
Leave a Reply