When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
- Top 10 Rated metal hole saw in 2022 Comparison Table
- Our Best Choice: EZARC Tungsten Carbide Teeth Hole Saw (Hole Cutter) Heavy Duty for Stainless Steel 2-3/8” 60mm
- EZARC Tungsten Carbide Hole Saw – Design for Hard Steel
- EZARC Tungsten Carbide Hole Observed
- Hundreds of Holes by Drilling on Stainless Steel
- Precise Drill
- Extremely Long Life – Benchmark Test
Top 10 Rated metal hole saw in 2022 Comparison Table
- 【Hole Saw Kits】- There are 15 sizes of hole saws for you to choose. You can cut holes from 15mm/0.59in to 3mm/2.1in according to your needs.
- 【Resistance and Durable】- The hole saw kit is made of HSS high-speed steel. The saw blade is extremely sharp, low consumption, durable, impact resistance and wear resistance.
- 【High Hardness】- The saw blade is quenched and has high hardness and strength(hardness 59-60HRC). Hole saw kits can drill about 7/9" depth for the wood, and 1/5" for the stainless steel.
- 【Individual Package】- Each HSS hole saw is individually packaged in a plastic box. You can easily use and store them.
- 【Wide Range of Applications】-The carbide teeth of the hole saw kit is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass.
- ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance.
- ⭐【Dimension】Cutting Dia: 38mm/ 1.5";Shank Dia: 10mm/0.4" ;Hole Saw Depth : 25mm/ 1"
- ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material.
- ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit
- ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
- 🌟【BI-METAL & HIGH QUALITY】The HYCHIKA saw blades are made of bimetallic material, the cutting part is made of high hardness (69~81HRC), high strength hard alloy steel, 2 mm thick. The product has the advantages of wear resistance, better toughness and long usage life.
- 🌟【HIGH PRECISION & FAST CUTTING】The tooth of the saws has been optimized and improved many times, higher cutting efficiency, cleaner and smoother cutting, higher precision; the chip removal groove added on the side of the hole saw can discharge the chip rapidly.
- 🌟【11 HOLE SAWS AND 6 ACCESSORIES】 Including 11pcs size saw blades: 19mm, 22mm, 25mm, 29mm, 35mm, 38mm, 44mm, 51mm, 57mm, 60mm, 68mm, max cutting depth of 40mm, 2pcs mandrels, 3pcs drill bits for easy replacement, 1pc hex key.
- 🌟【WIDE APPLICATIONS & CONVENIENT STORAGE】 The HYCHIKA hole saws are durable and reliable to use on workpieces, suitable for hole cutting on soft metal, wood, PVC board, plastic, gypsum board; comes with a sturdy and small storage box, which is very convenient to store and easy to carry.
- 🌟【WHAT YOU GET】11 x HYCHIKA Bi-Metal Hole Saw Blades, 2 x Mandrels, 3 x Drill Bits, 1 x Hex Key, 1 x Storage Box, 1 x User Manual
- 【DURABLE AND SAFETY】: Construction of high quality Bi-Metal for rust proof, 2mm thick, much more durable and can offer a up to 50% longer life; great corrosion and heat resistance
- 【GREAT HOLE CUTTING】: Sharp teeth perfect for hole cutting on metal, wood, PVC board, plastic and drywall; clean and smooth cut; high precision; cutting depth varies from 43mm to 50mm according to different sizes
- 【COMPLETE SET】: Includes 10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for needs in different situations, 1 x Spare Pilot Drill for replacement, 1 x Large Mandrel, 1 x Small Mandrel with Medium Adapter and 1 x Plastic Case for easy storage (together with a hex key)
- 【EASY TO USE】: Different mandrels for saws of different sizes, compatible with most drills of other manufacturers; user's manual provides clear instructions and details about how to use safely
- 【CONVENIENT STORAGE】: Everything in this kit is well organized in a solid plastic case, great for storage after using and easy carrying out for work; free of worry about losing small parts in the kit after handling
- Top Quality：Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；
- Large Size：Include 5/8Inch(16mm), 7/8Inch(22mm),1-3/16Inch(30mm),1-9/16Inch(40mm), 2Inch(50mm), 2-3/8Inch(60mm)，and 2pcs Extra Titanium-Plated Pilot Drill bit ,each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust).
- Unique Three-blade Design: This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals;
- Multipurpose Tools：This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone.
- High precision and Easy to Use: TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine
- The product is easy to use
- The product is durable
- The product is manufactured in United States
- ICE HARDENED for up to 50% longer life than the competition
- Matrix II Bi-Metal Teeth for greater durability
- Material: Bi-metal
- Compatible Material: Plastic , Metal , Wood
- HIGH-QUALITY MATERIAL: Hole Saw Set is made of high quality Bi-Metal. The main body and the cutting edges of the bi-metal hole saw consist of two different tool steels (bi-metal). The main body consists of a special flexible steel and the teeth that cut the material are made of HSS.
- SUPERIOR PERFORMANCE: The varied and fine toothing ensure that the hole saw does not get caught in the material and runs smoothly. Bi-metal hole saws have a larger number of cutting edges than carbide hole saws, which allow a clean cut.
- WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for metal, normal wood, thin PVC board, plastic.
- Top Quality：Made from high quality Cemented Carbide, ensuring its high hardness, rust proof, sturdy and durable；
- Large Size：Include 22mm/30mm/35mm/45mm/50mm/65mm，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust).
- Multipurpose Tools：This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；
- High precision and Easy to Use: Tungsten Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine
- Commitment: Product quality problems, can be unconditional full money refund within lifetime.
- LONG LIFE AND ADDED DURABILITY: Bi-metal construction for long life and added durability for the hole saw kit
- VARIETY OF SIZES: The holesaw kit has the most popular sizes for common jobs with a storage case
- For use in wood and metal cutting applications
- 2X more durable with 50% longer life than previous LENOX hole saws
- Increased wall thickness improves durability and minimizes tooth loss
- Optimized tooth design penetrates metal with ease
- Larger, sharper teeth for faster cutting
- SPEED SLOT staircase design for easy plug ejection
Our Best Choice: EZARC Tungsten Carbide Teeth Hole Saw (Hole Cutter) Heavy Duty for Stainless Steel 2-3/8” 60mm
(4.9 / 5)[ad_1]
Item Description
EZARC Tungsten Carbide Hole Saw – Design for Hard Steel
About EZARC Applications
As a specialist company of hand applications, EZARC Resources can make quality-good quality, skilled-quality resources that provide efficiency, durability and precision. Our staff continues to put abilities into each instrument by employing the highest excellent components and excellent workmanship.
EZARC Equipment would not just make wonderful solutions, we make fantastic merchandise that stand up to the calls for of the gurus who use them each and every day.
EZARC Tungsten Carbide Hole Observed
Industrial Grade
EZARC has the total selection tungsten carbide hole saws with in excess of 40 various dimensions from 14mm to 120mm. If purchaser ask for a distinct diameter out of the list, we can also customise according customer’s ask for.
Solution Aspect:
Reducing Depth: 5mm thickness steel
Shanks Size: 10mm for dia. < 70mm, 13mm for dia. ≥70mm
Suitable tools: drills, impact drills in a drilling mode and CNC drilling machine
Extremely long lifetime with high grade carbide grit and remarkable brazing technology.
Excellent processing technology ensures precise cuts and high quality cutting surface.
Stepped pilot drill bit design protects carbide teeth from impacting when the pilot drill bit through the cutting material.
Hundreds of Holes by Drilling on Stainless Steel
Why Choose EZARC Metal Hole Cutters?
User Benefits:
Extremely long lifetime with high grade carbide grit and remarkable brazing technology.
Excellent processing technology ensures precise cuts and high quality cutting surface.
Stepped pilot drill bit design protects carbide teeth from impacting perfectly.
User Groups
Ventilation/water/electricity installer
Steel structure installer
Professional decorators
Industrial metal workers
Automotive repairing workers
Home DIY users
10x Times Longer Lifetime
Cuts quick, precise holes in a variety of materials
Based on thousands of positive laboratory tests. EZARC Hole saw show excellent test results as same level as the best brands in the market, the quality of the product is reliable.
Applications
Smooth cuts into up to 1/5-inch thickness material like stainless steel, high alloy steel, aluminum, plastic, FRP and PVC.
Widely used for home decoration work, e.g. drill holes on metal plate in the kitchen room, door structure and cable box.
Heavy usage on industrial plants, e.g. applications in heating, ventilation and air conditioning demand an enduring hole saw that delivers a precise cut into high quality stainless steel.
Precise drilling for electric boxes to smoothly assemble buttons, switches and displays.
Precise Drill
Smooth Cut with Perfect Cutting Result
Designed with precision ground sharp teeth to drill more precise, smooth, faster and safer, leave perfect cutting results.
Extremely Long Life – Benchmark Test
Over 10 Times Longer Life
Drilling Material: 2mm Stainless Steel
EZARC Tungsten carbide hole saw series cut fast and precisely through a wide variety of metal applications whilst enduring even heavy usage. It is proven to accomplish most enduring cuts on stainless steel, it provides a much longer lifetime and substantial speed advantage.
Extreme durability and no teeth breakage for any tough job
Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood
Smooth cuts with perfect cutting result
All in one design: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works
Replaceable high quality pilot drill bit are available
Leave a Reply