When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated miter box saw in 2023 Comparison Table
- Fine Kerf Saw
- With Aluminum Thin Slot Miter Box
- Item Package Dimension: 13.0" L x 4.0" W x 1.5" H
- Item Package Weight: 1.0 lb
- 6-1/2in. aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw.
- The hand miter saw is designed for precision wood cutting
- EASE OF USE: Easy angle adjustment and comfortable grip
- SECURE MATERIAL: Clamps hold work in place and work stop allows for quick, repetitive cuts
- LONG LASTING SHARPNESS: Induction hardened teeth
- MITRE BOX AND SAW: These mitre boxes with hand saws are designed to cut soft and hard woods commonly used in molding and trimming applications; Wood saw features 12 teeth per inch for smoother cutting; 12 inch mitre box and 14 inch back saw
- REINFORCED BACK SAW: This mitre box saw set includes a reinforced steel back saw for wood for accurate cutting; Straight back saw edge ensures the blade remains straight during cutting tasks; Mitre hand saw features a 3-inch depth cut
- PRESET CUTTING BOX: Our mitre saw box has convenient preset cuts for 45 degree and 90 degree angles, allowing for precisely beveled corner cuts; Precise and accurate 45 degree cutting tool and 90 degree angle cutting tool
- RULER EDGE INCLUDED: The mitre box in this precision saw set includes a built-in 8-1/2 inch ruler edge for quick measurements and precise cuts; Perfect mitre saw set with a woodworking ruler for small projects around the house or on the job
- DURABLE ANGLE BOX: This compact mitre saw set comes with a high-impact polystyrene mitre box and a steel back saw with a high-impact plastic saw handle; Wood hand saw gets the job done without damaging our sturdy mitre saw 12 inch box
- 90°, 45° and 22.5° slots
- 11.81in length with a patented storage system for the saw
- Material: aluminum
- 10" Compound Miter Saw
- MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
- LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
- MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
- BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
- 10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw
- Linear ball bearing system engineered to deliver "dead-on" accurate cuts
- Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")
- Unique 2-steel rail sliding system design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall
- Less weight (57.9 lbs.) and the most compact design in its Class for easy jobsite portability
- 【12” MITER SAW WITH ADJUSTABLE BLADE ANGLE】The handle is angled for comfort during sawing and to give added pressure for use with those tougher materials. Additional, the back saw blade angle is adjustable according to your need. Ergonomically designed handle is allows for a secure grip. The material of handle is ABS engineering plastic (pure material) + TPR coated.
- 【12" RIGID SAW - SK5 STEEL】DUEBEL backsaw comes with strong spine to prevent bending and flexing during use and for creating precise cuts time after time. Blade is made of high quality SK5 steel.
- 【MITER BOX SUPPORTS 3 CUTTING ANGLES： 0° & 22.5° & 45°】22.5° cut wood can be combined into a regular octagon shapes, 45° cut wood can be assembled into a regular quadrilateral, perfect for the DIY enthusiast or seasoned woodworkers who looking to make accurate 0° / 22.5° / 45° cuts in materials such as wood, plastic or plaster.
- 【14" MITER BOX SUPPORTS FOR CUTTING WOOD SIZE】4 fixing bolts can be adjusted according to the size of the wood. Another 4 pieces 45° beveled accessories for fixing sloped wood. Support for wood size: width between 0.6 inch - 4 inch, thickness between 0.23 inch - 2.8 inch.
- 【EASY TO USE】Just place the wood inside the miter box and align according to desired measurement and cut angle. 4 Holes in base for fastening to a work bench, there comes with 4 screws, miter box can be held in place with free hand or attached to a work surface for added support. Miter box set can be used by anyone regardless of experience or ability. Ideal for hobbyists and wood workers.
- Size: 12" Mitre Box , 14" Back Saw, 45° hole slot.
- Durable: The saw blade is made of premium steel, double-sided mechanical grinding, wear-resistant, and absolutely sharp.
- Ergonomic design: The handle of the saw is made of ABS engineering plastic and TPR plastic for a comfortable grip and save labor.
- Safe to Use: The gap of the chute box is 2cm, the thickness of the saw is 1.2cm, when using the saw, the saw will not cut into the box.
- Use Tip: Use the sides of the box to line your saw up with the correct angle. Score your cut with the saw first, making sure the cut will be on the waste side of the mark. Then, proceed to use the saw normally to cut through your piece.
- Sliding Double Bevel Compound Miter Saw
- MOTOR: 12 amp motor for professional power
- BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place
- MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left
- MITER SCALE: White on black miter scale for superior accuracy and visibility
- Integrated cut line cross-cut positioning system of DEWALT 20V miter saw provides adjustment-free cut line indication for better accuracy and visibility
- The mitre saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2-inch base vertically
- Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy for DEWALT miter saw
- Oversized bevel scale makes bevel angle adjustments accurate and easy
- Compact, lightweight design (30 lbs.) allows for easy transport and storage
Our Best Choice: IIT 12” Lightweight Plastic Mountable MITER BOX Wood Angle Cutting Saw
[ad_1] Description: Brand New and Large Quality. Capabilities: This Mitre Box is utilised for reducing 22.5° angle, 45° angle, and 90° angle. Ideal for building execs and property do-it-yourselfers. Application: Popularly applied on architectural facts, this kind of as bay home windows, angle cutting, and so forth. Requirements: Material: Stable Plastic Inner Length: 295mm/12” Internal Width: 90mm/3.5” Internal Height: 50mm/2” Shade: Orange (Pictures may perhaps have a slight color big difference challenge because of to mild and digital camera show) Deal Integrated: 1pcs x mitre box ( Do not include things like the Saw )
Precision and Precision: Enables you to reduce exact with multiple slash angles at 45 and 90 levels for backsaw or cross minimize panel noticed wooden chopping
Securely Fixed: Featuring screw holes for fastening and an overhang edge, the miter box is built to keep protected when cutting.
Sturdy building and oversized guides: Gives blade security to finish projects large and compact with precision.
12” Miter box is produced of reliable plastic which mounts very easily to operate benches for superior balance.
Popularly made use of on architectural specifics, such as bay windows, angle reducing, and so forth.