When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
Top 10 Rated nail gun compressor kit in 2022 Comparison Table
- 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo kit
- Nail gun and compressor kit features long-life oil-free, maintenance-free pump for convenient use
- BOSTITCH high efficiency motor of the air compressor nail gun combo is made for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]
- 78.5 dBA** operational noise level for a quiet work environment
- SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch
- SB-1850BN 18 GA brad nailer in the air compressor combo kit drives 18GA brad nails from 5/8-inch to 2-inch
- SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch
- BTFP71875 heavy-duty 3/8-inch crown stapler drives 3/8-inch crown staples from 1/4-inch to 9/16-inch and 18GA brad nails from 1/2-inch to 5/8-inch
- 1/4-inch x 15' PVC air hose includes fittings
- Quiet Series compressor design at only 58 dB for operator and crew comfort; ideal for indoor use
- Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life
- Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments
- Oil-free dual-piston pump designed for maintenance-free operation
- Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage
- Everything You Need: This kit features a 21 degree framing nailer, 16-gauge straight finish nailer, 18-gauge brad nailer, 18-gauge narrow crown Stapler, 23-gauge micro pin nailer, fine wire stapler, and mini palm nailer – plus 2 canvas bags and fasteners for each tool.
- Pro Design: This versatile 9 piece combo kit includes nailers to use on nearly every project, from arts and crafts to framing and decking and any job in between. Fasteners are also included for each tool, so you can get started on your project right away.
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
- DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
- DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
- Tool-free depth-of-drive adjustment and tool-free jam release
- Low 75.5 dBA for a quiet work environment
- Kindly refer user manual for instructions.
- Motor & Pump: 120V/60Hz, 11A, Peak 1.5HP, Max speed 3500 RPM, high efficiency motor for easy start up in cold weather as low as -32°F; Oil Free pump for convenient use, no need to add motor oil.
- Pressure: Max Pressure 150 PSI, drive more nails than a traditional 135 max psi compressor; [email protected], allows for quick compressor recovery; with 2 high flow universal couplers, easy to push to connect.
- Accessories: 25 feet 1/4" pvc Air Hose; 17-piece air tool accessory kit; 2 in 1 Nailer/Stapler: 18 Gauge Nailer and Stapler in one, drives 18GA brad nails from 3/4" to 2" long, drives Staplers from 5/8" to 1-9/16" long, for a wide variety of applications.
- Portable: 6 gal (23L) pancake tank capacity, Lightweight about 34.4 lbs with hand carry, portable and easy to move.
- Warranty: this item is free from defects in materials and workmanship 90 days since purchase, and 1 year limited warranty. Contact us if any question and we are here for You.
- Ultra quiet only 60 decibels
- Oil-free pump for less maintenance & costs
- 2. 0 gallon (rust free) aluminum tank
- Powerful 1. 0 HP (rated/ running) 2. 0 HP (peak) motor
- 2. 20 CFM @ 90 PSI
- C2002 shroud allows for better protection and portability
- C2002 has 2.6 SCFM at 90 psi, allowing for quick compressor recovery time, per ISO1217
- FN250SB uses standard 16 Ga. finish nails from 1 in. to 2-1/2 in. long
- BN200SB uses standard 18 Ga. brad nails from 5/8 in. to 2 in. long
- PIN138 uses 23 Ga. headless and slight head pin nails from 5/8 in. to 1-3/8 in. length
- 18-gauge brad nailer(HF50SP) and 1-gallon compressor(HC0504G) combo kit is ideal for finish and trim jobs
- HF50SP-Drives 18-gauge brad nails from 3/4'' to 2'', features an adjustable depth-of-drive, 360° air exhaust, quick-clear jam release and no-mar tip
- HC0504G--Features a direct-drive, oil-free pump that ensures clean operation and minimal maintenance. Roll bar design protects vital components
- Compressor Spec. are as follows: 1/2 HP, [email protected], 1 gallon tank, 125 PSI max, low 65 dBA and 23lbs total weight.
- Kit also includes air hose with fittings, goggle, wrenches and manuals
- Finish Pro 18 combo kit
- This product is highly durable
- This product is manufactured in China
- 18-gauge brad nailer and 1-gallon compressor combo kit
- Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load-indicator
Our Best Choice: AIR LOCKER ap700 professional Punch Nailer/Nail Remover (AP700 With DAP700 Piston Driver Assembly)
(4.4 / 5)[ad_1]
Products Description
Item Description
Air Locker AP700 is a impressive instrument developed to force out nails from a selection of smooth and tough woods without the need of influencing the quality. With a light-weight die forged Aluminum physique.
AP700 just isn’t only extremely sturdy but characteristics an ergonomic rubberized grip so you can get the job done for prolonged several hours without the need of any tiredness.
The device will come with a slim elongated nose that conveniently gets into cramped spaces although hardened hammer delivers a strong blow to take away the nail. Now you can denail reclaimed wooden like a professional. You will have to have an air compressor for utilization.
Apps:
Eliminate nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and picket decks.
Is effective with various kinds of smooth and tricky woods such as Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple.
Consists of
Punch Nailer / Nail Remover
Working Handbook
Packaged in cardboard box
Rubberized consolation grip for fatigueless use
Normally you need to get the job done prolonged several hours when you have substantial job. AP700 will come with a rubberized ergonomic grip that doesn’t only come to feel wonderful in your hand but keeps you likely preventing tiredness and soreness.
Denail boards/pallets without any hurt
Why commit hours eliminating nails manually when you can denail wooden in a issue of minutes? This remarkable nail puncher delivers you outstanding portability that you will take pleasure in. Eliminates or sinks nails involving 10-20 gauge sizes.
Light-weight resilient die forged Aluminum human body
Peaceful and exact operation saves hard work and time. The die cast aluminum body can make the gadget long lasting but the general unit nonetheless weighs just below 2 lbs. and feels terrific in your hands. Ideal for recycling wooden whilst sustaining its quality.
Press selection of nails out of challenging woods
The nail puncher offers sufficient ability to press nails out of thick pallets. You can also use AP700 to sink nails into a assortment of soft and hard woods like Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, White Oak and Maple.
Rubberized Ring Stops Slidage
The nail puncher has a rubberized ring close to the rear stop of the unit to stop sliding when you are not working with it.
Directional Exhaust adds Advantage
The rear conclusion also characteristics a directional exhaust which you can rotate 360 degrees to immediate exhaust away from your confront or do the job space.
Make sure to invest in the AP700 with the Piston Driver Assembly for Punch Nailer AP700
Driver Diameter: .157″
Punch / Clear away or Sink nails involving 10-20 gauge measurements
Quick to use
Leave a Reply