When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best oregon s55 chainsaw chain in 2022 Comparison Table
Bestseller No. 1
Oregon S55 AdvanceCut 16-Inch Chainsaw Chain Fits McCulloch, Stihl (Renewed)
- Pitch: 3/8" Low Profile, gauge: .050", drive link count: 55
- LubriTec keeps your chain and guide bar oiled for less friction and longer life
- For saw sizes up to 42 cc
- This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
Bestseller No. 2
UpStart Components 3-Pack 16" Semi Chisel Saw Chain for Oregon S55 Chainsaws - (16 inch, 3/8" Low Profile Pitch, 0.050" Gauge, 55 Drive Links, CSC-S55)
- Replacement Oregon S55 Chainsaw Chain; Quantity: 3 Chains
- High performance chain for smooth cuts. Engineered for precision, balance and safety for efficient cutting.
- Reduced vibration levels for consistent cuts and greater user comfort. Designed for durability to keep the chain sharper longer.
- Avoid injuries by replacing dull or damaged chains with a sharp new chain
- Please Note: The same saw can have different bar lengths so ensure you confirm the pitch, gauge, & drive links on your current bar. Not all bars take the same amount of links.
Bestseller No. 3
UpStart Components 6-Pack 16" Semi Chisel Saw Chain for Oregon S55 Chainsaws - (16 inch, 3/8" Low Profile Pitch, 0.050" Gauge, 55 Drive Links, CSC-S55)
- Replacement Oregon S55 Chainsaw Chain; Quantity: 6 Chains
- High performance chain for smooth cuts. Engineered for precision, balance and safety for efficient cutting.
- Reduced vibration levels for consistent cuts and greater user comfort. Designed for durability to keep the chain sharper longer.
- Avoid injuries by replacing dull or damaged chains with a sharp new chain
- Please Note: The same saw can have different bar lengths so ensure you confirm the pitch, gauge, & drive links on your current bar. Not all bars take the same amount of links.
SaleBestseller No. 4
PANZHENG Chainsaw Chain for 16-Inch Bars, S55, 3/8" LP Pitch - .050" Gauge - 55 Drive Links, fits Oregon, Stihl, Husqvarna, McCulloch, Poulan, Worx, Chicago（3-Pack）
- LONGER SERVICE LIFE: Each blade of our chain has oil storage holes. These small high-precision oil storage holes are distributed on both sides of the connecting rod. When the chain is working, the oil in the oil storage hole will flow out to lubricate the chain. This can greatly extend the life of the chain.
- RELIABLE QUALITY:1.Material:imported steel, high toughness, anti-fracture. 2. Connection: Heat treated and quenched rivets make stronger connection between chain links and deliver a high-quality, load-bearing surface that resists wear and improves strength. 3. Surface: All the chain cutters are plated with premium industrial hard chrome, of better wear resistance.11.Unique cutter design cuts smooth and fast with minimum kickback.
- EASY REPLACEMENT AND INSTALLATION-Lightweight and small design for easy storage. Chain Saw Chain Lightweight and wear-resistant, smooth cutting. The cutting is smooth and the chain is more dustproof.
- IDEAL FOR WORK-Capable of handling home yard work and cutting storm damaged trees.
- RELIABILITY ASSURANCE-Please verify your parameters to ensure this chain works with your machine before buying .If you have any questions, we will provide shopping experience guarantee service.
Bestseller No. 5
PANZHENG Chainsaw Chain for 16-Inch Bars, S55, 3/8" LP Pitch - .050" Gauge - 55 Drive Links, fits Oregon, Stihl, Husqvarna, McCulloch, Poulan, Worx, Chicago（1-Pack）
- LONGER SERVICE LIFE: Each blade of our chain has oil storage holes. These small high-precision oil storage holes are distributed on both sides of the connecting rod. When the chain is working, the oil in the oil storage hole will flow out to lubricate the chain. This can greatly extend the life of the chain.
- RELIABLE QUALITY:1.Material:imported steel, high toughness, anti-fracture. 2. Connection: Heat treated and quenched rivets make stronger connection between chain links and deliver a high-quality, load-bearing surface that resists wear and improves strength. 3. Surface: All the chain cutters are plated with premium industrial hard chrome, of better wear resistance.4.Unique cutter design cuts smooth and fast with minimum kickback.
- EASY REPLACEMENT AND INSTALLATION-Lightweight and small design for easy storage. Chain Saw Chain Lightweight and wear-resistant, smooth cutting. The cutting is smooth and the chain is more dustproof.
- IDEAL FOR WORK-Capable of handling home yard work and cutting storm damaged trees.
- RELIABILITY ASSURANCE-Please verify your parameters to ensure this chain works with your machine before buying .If you have any questions, we will provide shopping experience guarantee service.
Bestseller No. 6
Bestseller No. 7
Oregon 105668 AdvanceCut S55 16 in. Chain and Guide Bar Combo, Fits Stihl Chainsaws,Gray
- 16-Inch chainsaw chain and guide bar made by the world’s leading saw chain manufacturer. Pitch: 3/8 in. low profile, gauge: 0.050 in., chain drive link count: 55
- Fits certain Stihl chainsaw models including MS170, MS180C, 021 and MS211
- Chain is durable and easy to maintain, with a forgiving cutting performance
- Keep your bar and chain oiled with the built-in LubriTec oiling system for less friction and longer life
- Guide bar is lightweight and is easy to maneuver because of its slim symmetrical contour
Bestseller No. 8
Oregon 105671 20-Inch Replacement Chainsaw Bar and Chain Combo for Stihl,Grey
- Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290
- Lubritec system keeps your chain and guide bar oiled for less friction and longer life
- For saw sizes up to 62 cc. No narrow kerf
- Pitch: .325", Gauge: .063", chain drive link count: 81
- Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
Bestseller No. 9
Toolgal Diamond Chain & Drive Sprocket for Fast Cutting - 3/8” Pitch - ProGal - 71 Links –for Wet Cutting of Construction Uses - Concrete, Reinforced Concrete, Masonry and More - Fits to 16" Guide Bar
- SPECIFICATIONS Made of high-quality heat-treated Steel, advanced metallurgical technology and High-Quality Diamond Grits. * Use with included 10-teeth Drive Sprocket Only. Fits for 16"" guide bar - 71 Links - 3/8"" Pitch / Segment thickness 0.224"" – For Wet Cutting Only – complies with ISO process control and Strict QA inspection for max safety and quality.
- NEW INNOVATIVE DESIGN, FOR HEAVY DUTY USE - fast and smooth cutting, less vibration, highest life span. ToolGal Porgal premium professional diamond chain is designed for cutting through Concrete, Reinforced Concrete, Blocks ,Bricks, sandstone, abrasive materials, masonry general building materials, stone /granite, coal, firebrick/ Refractories.
- CHOOSING THE RIGHT CHAIN FOR YOUR PROJECT is essential in achieving the best value. Each link of the Laser Welded Porgal Diamond Chain is tipped with a diamond segment which provides smoother cutting and higher output for heavy duty use.
- COMPATIBLE WITH: Engine / Hydraulic / Gas Power Chainsaw Cutters ICS 853/823, ICS 695, PARTNER K950/60/70, HUSQVARNA 695 , ICS 633 , ICS 680/613, CARDI, WEKA, Husqvarna K6500
Bestseller No. 10
Oregon 27850 20-Inch AdvanceCut Guide Bar and D70 Chainsaw Chain Combo,Grey
- 20” guide bar and saw chain made by the world’s leading saw chain manufacturer. Pitch: 3/8", Gauge: .050", chain drive link count: 70
- Fits chainsaws from Echo, McCulloch, Poulan and other brands.
- For saw sizes up to 60 cc
- Lubritec system keeps your chain and guide bar oiled for less friction and longer life
- Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
Our Best Choice: Oregon S55 AdvanceCut 16-Inch Chainsaw Chain Fits McCulloch, Stihl (Renewed)
Our rating: (4.7 / 5)
(4.7 / 5)[ad_1] This pre-owned or refurbished merchandise has been skillfully inspected and analyzed to do the job and glimpse like new. How a solution gets to be component of Amazon Renewed, your spot for pre-owned, refurbished products and solutions: A buyer buys a new merchandise and returns it or trades it in for a more recent or various model. That merchandise is inspected and examined to function and look like new by Amazon-skilled suppliers. Then, the item is sold as an Amazon Renewed item on Amazon. If not content with the purchase, renewed solutions are qualified for alternative or refund beneath the Amazon Renewed Guarantee.
Pitch: 3/8″ Small Profile, gauge: .050″, travel link depend: 55
LubriTec keeps your chain and guide bar oiled for less friction and longer daily life
For saw sizes up to 42 cc
This saw chain met the kickback performance necessity of ANSI B175.1-2012 when examined in accordance to the provisions of ANSI B175.1-2012. Lower-kickback observed chain meets the kickback efficiency need of CSA Standard Z62.3.
Leave a Reply