When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated ratcheting tubing cutter in 2023 Comparison Table
SaleBestseller No. 1
Robinair 42071 Ratcheting Tubing Cutter for 1/8" to 1/2" Tubing
- Designed for cutting tubing in confined spaces
- Spring-loaded adjusting screw applies continuous pressure while cutting
- Strong light weight nylon handle
- For cutting 1/8 - 1/2 tubing
- Works on PVC and a variety of metal and steel tubing
Bestseller No. 2
RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch Tubing Cutter
- Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handle
- Designed to cut hard and soft copper, aluminum and brass
- Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees
- Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once
- Tubing bender has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity
Bestseller No. 3
Nerrad Tools NT4023 Adjustable Ratchet Action Copper/INOX Tube Cutter, Red/Black, 6-23 mm
- Internal cutting mechanism rotates independently from body
- Ideal for working in confined spaces
- Ergonomic handle is designed for single hand operation
- Requires low effort to operate
- Patented design
SaleBestseller No. 4
RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter
- Designed for cutting plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
- Features an easily replaceable X-CEL quick change blade
- "Burr-less" cutting operation provides a square cut with less effort
- Ergonomic grips on bottom handle spaced at 1/2-inch increments, acting as a quick pipe measuring scale
- Tubing cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity
Bestseller No. 5
Robinair 42090 Ratcheting Tubing Cutter for 5/16" to 1-1/8" Tubing
- Robinair's Ratcheting Tubing Cutter is designed for use in confined spaces
- Unique ratcheting action operates like a socket ratchet to cut copper, aluminum, steel, stainless steel, and PVC pipe and tubing
- Spring-loaded adjusting screw applies continuous pressure while cutting
- Cleanly cuts tubing or pipe from as small as 1/4 inch OD all the way up to 1-1/8 inch OD
- Replaceable cutter blades are made from high quality, shock-resistant, tool steel with heat treating to resist breakage and last longer
Bestseller No. 6
BGS 66250 | Ratcheting Tube Cutter for Exhaust Pipes | 28-67 mm
- Exhaust Pipe Cutter with ratchet function, 28 – 67 mm
- Item number: 66250
- Original BGS quality
- Strong and hard wearing
Bestseller No. 7
Anglo American Tools - Ratch-Cut 4" Ratcheting Tube Cutter, Nylon Fiber Covered Handles, RC375
- Cuts quickly and precisely through copper, brass, stainless steel, aluminum, plastic tubing, thin wall PVC and CPVC, etc.
- Cuts pipes with a diameter from 1/8-Inch to 3/8-Inch
- Traditional red plastic body
- Cutting wheels are replaceable (RC375-7C)
Bestseller No. 8
LENOX Tools PVC Cutter, Ratcheting, Up To 1-5/8-Inch Diameter (12123R1)
- The specially designed jaws on this PVC pipe cutter hold the pipe in place for straight, easy cuts
- This PVC cutter has rubberized grips that allow confident cutting, even in wet or dirty conditions
- A release button on this PVC pipe cutter allows true 1-handed operation
- Locking tab keeps the stainless-steel blade securely in place during 1-handed operation
- Cuts up to 1-1/4-inch nominal and 1-5/8-inch maximum OD
Bestseller No. 9
Robinair 42080 Ratcheting Tubing Cutter for 1/4" to 7/8" OD Pipe and Tubing
- Robinair's Ratcheting Tubing Cutter is designed for use in confined spaces
- Unique ratcheting action operates like a socket ratchet to cut copper, aluminum, steel, stainless steel, and PVC pipe and tubing
- Spring-loaded adjusting screw applies continuous pressure while cutting
- Cleanly cuts tubing or pipe from as small as 1/4 inch OD all the way up to 7/8 inch OD
- Replaceable cutter blades are made from high quality, shock-resistant, tool steel with heat treating to resist breakage and last longer
Bestseller No. 10
Ridgid RC-2375 Ratchet Action 2" Pipe and Tubing Cutter , Chrome , Small - 30088
- Designed to cut plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
- Features an easily replaceable X-CEL quick change blade
- "Burr-less" cutting operation delivers a square cut with less effort
- Sturdy aluminum construction suitable for heavy-duty use
- Tubing cutter has a 1/8-inch to 2-3/8-inch (3 mm to 63 mm) outer diameter capacity
Our Best Choice: Cal-Van Tools 767 Ratcheting Tubing/PVC Cutter , Black
Our rating: (4.9 / 5)
(4.9 / 5)[ad_1] Cal-Van Instruments Ratcheting Tubing/PVC Cutter allows to slice the industrial air hose, multi goal hose, heater and washer hose. It also cuts the vacuum hose, non metallic gasoline line hose, PVC pipe, battery cables, copper tractor trailer cable and non metallic air brake hose. It is up to 11/2 inch in diameter. It capabilities a brief launch system to rapidly and very easily open the pliers for use. It has a ratcheting action which will make cutting easy. It also features a locking mechanism, in take care of, for storage.
Cuts industrial air hose, multi objective hose, heater and washer hose vacuum hose, non metallic gas line hose, PVC pipe, battery cables, copper tractor trailer cable and non metallic air brake hose, up to 1½” in diameter
Capabilities a fast release system to promptly and easily open up pliers for use
Ratcheting action will make slicing uncomplicated
Also attributes a locking mechanism, in tackle, for storage
Leave a Reply