When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated skidoo clutch spring compressor in 2023 Comparison Table
Bestseller No. 1
Starting Line Products SLP 20-173-20 - Spring Compressor for Polaris Snowmobile and RZR and Ranger with TEAM TSS98, TSS04, Tied, Rapid Reaction Secondary Clutch and All Polaris Primary clutches
- Will work on most Polaris UTV and snowmobile to compress the primary or secondary clutch for disassembly
- Also compatible with Arctic Cat, Ski-Doo & Yamaha models that have TEAM factory or aftermarket TSS-98, TSS04, or Tied secondary clutches.
SaleBestseller No. 2
Coil Spring Compressor Tool, Orion Motor Tech Macpherson Strut Spring Compressor,13/16in Socket 1/2in Drive
- Heavy Duty 11-4/5” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.
- Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
- Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs).
- Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice.
- Orion Motor Tech pursue outstanding quality and 2-YEAR WARRANTY service, only have point of departure, there is no terminal point. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. 1.Go to your amazon account and find the order. 2.Click the seller name and enter the store page. 3.Click "Ask a question".
Bestseller No. 3
2 Pieces exhaust spring puller tool Motorcycle Exhaust Spring Hooks T Shaped Handle Exhaust Spring Hooks Exhaust Pipe Spring Installed Puller Hooks with Rubber Coating for Motorcycle (Red with Black)
- What you receive: you will receive 2 pieces motorcycle exhaust spring hooks, enough quantity will meet your various use demands and make your replacement easily
- Humanized design: the exhaust puller tool is designed with a t shape pattern, which can increase the braced force and let you control easily, and the exhaust puller tool is designed with the rubber coating, which can relieve the pressure on your hands and make your use comfortably, and the thin hook which is at the top is convenient for you to operate in a narrow space
- Extensive usage: the t-shaped exhaust spring hook is suitable for many places where springs need to be removed and installed, such as vehicle brakes, riding lawnmower decks, motorcycle and more other vehicles
- Durable material: the exhaust pipe spring installed puller hooks are made of metal and rubber material, comfortable to touch, resistant to fade, durable to use, sturdy and not easy to break, safe and no bad smell, you can use them for a long time
- Size information: the multipurpose spring hook measures approx. 6.30 x 3.15 inches/16 x 8 cm, light and small, suitable size will make your use easier and easy for you to carry, and it is convenient for you to operate in a small space
SaleBestseller No. 4
BAIONE Clutch Spring Compressor Compression Tool for Harley Touring Softtail Sportster Dyna XL 883 1200 48(Replaces OEM number HD-38515A)
- Professional Tool & Easy Operation: Provides easy access to spring retaining ring for removal of clutch springs and plates ,saves your time and energy.
- Sturdy and Durable: We have improved and upgraded the quality of the clutch spring compressor tool, which is made of heavy-duty steel with coating rust-proof grease on the processed surface, make the machine not easy to rust,easy to clean and maintenance.
- Fitment: Clutch tool fits for most Harley Davidson 1340cc models from 1990-2007 and all XLH 883 XL1200 Fits 1200cc models from 1991-2001 & all Buell models 1995-2001
- Replaces H-D number HD-38515A.Fast delivery, you don't have to wait for a long time.
- A must have tool for those who works on their own clutching!
Bestseller No. 5
Goplus Transmission Spring Compressor, Automatic Transmission Clutch Removing/ Installing Tool Kit, Strut Spring Compressor
- ⚒️ Professional Tool: Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work.
- ⚒️ Sturdy and Durable Construction: Made of A3 steel and galvanized metal legs, this compressor is sturdy and durable for long time use. And with coating rust-proof grease on the processed surface, the machine is free from rust. Due to this feature, it is easy for you to clean and maintenance.
- ⚒️ Easy Operation: Just simply install the clutch spring compressor in position, and turn the knob to place pressure on the spring cage until it gives you enough room to release the snap ring during repairs or overhaul, which saves your time and energy.
- ⚒️ Suitable for Many Cars: This tool kit can apply pressure to the clutch drum's retaining washer to compress piston return springs, which can be used on most American cars and light trucks such as Crown Victoria, Town Car, Ranger and Focus.
- ⚒️ Lightweight to Easy-Carry: This clutch spring compressor only weighs 2.8lbs, so that you can carry it easily. And because of its compact frame, you can put it on your car in case you need it someday.
Bestseller No. 6
Primary Drive Clutch Puller Remove Tool Compatible with Polaris 1985-2016 RZR Ranger Sportsman Scrambler General Replaces 2870506
- Compatible with: most of Polaris Models 1985-2016 replacement 2870506
- Material: Manufactured from the highest quality steel and heat treated for superior strength. Strong and durable
- Size : Precise machining for accuracy, 3/4" - 16 thread,10-1/2" long.
- The clutch tool perfect fit and releases the primary clutch based on thread design.it can reduce the risk damaging the threads.
- Package included: 1pcs Clutch Puller Remove Tool.
Bestseller No. 7
Motion Pro Clutch Spring Compressor 08-0137
- Used to release the clutch spring
- Sold as a kit
Bestseller No. 8
Clutch Compression Tool SECONDARY CLUTCH COMPRESSION TOOL RZR YAMAHA ARCTIC CAT UTV GOLF CART Clutch Compression Tool
- 1.This will fit most atv, utv, sxs and snowmobiles out there with a belt driven secondary clutch.
- 2.Designed so that only one person is needed to compress clutches when performing maintenance
- 3.Remove/install helixes or use when changing springs
Bestseller No. 9
Shankly Spring Compressor Tool (2 Pieces) - Heavy Duty Build, Ultra Rugged Coil Spring Compressor, Strong and Durable Spring Compressor with Safety Guard and Carrying Case
- RUGGED AND DURABLE FRAME: Shankly’s heavy duty spring compressor for struts and coil springs reduces tool flexing, bending, and warping, providing confidence to the mechanic.
- LARGE CARS AND TRUCKS, NO PROBLEM: Many coil spring compressor tools slip and buckle under high tension, Shankly’s heavy duty spring compressor tool bears 1000 kg maximum capacity per pair. Ideal solution for larger vehicles.
- STRONG AND SECURE HOOKS REDUCE SLIPPAGE: Avoid strut compressors with flimsy hooks creating slippage and other safety problems. Shankly’s coil compressor hooks grip springs tightly by turning easy to use hex nuts.
- UNIVERSAL COMPRESSOR TOOL: Wide jaw capacity (23 mm - 280 mm) make Shankly’s coil spring compressor tool is ideal for a range of vehicles, assisting the mechanic with years of compression jobs.
- IMPORTANT SAFETY INSTRUCTIONS: Coil spring tool work can be dangerous. Shankly’s strut spring compressors feature lower security jaws, adjustable safety bars and a safety guard to reduce work site perils. GREASE THREADS WELL TO PRESERVE THREADS AND AVOID STRIPPING. DO NOT USE IMPACT GUN TO TIGHTEN, APPLY EVEN PRESSURE TO BOTH BY HAND USING A RATCHET WRENCH.
SaleBestseller No. 10
Bonbo T-0158 Universal Clutch Drum Spring Compressor Transmission Tool Heavy Duty Steel
- Wide Application – For use on universal transmissions and will fit most common clutch drums up to 6" in size. To check more applicable models, please refer to the description below.
- Great Function – Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. (Attention: Does not do rear case pistons)
- Considerate Design – 6" long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise.
- Superior Quality – Made of premium and wear resistance steel, sturdy, impact resistance and anti-corrosion for much longer service time.
- Satisfaction Guarantee – If you're not satisfied with the tool, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. Put us to the test! Click on the "Add to Cart" button NOW and get this helpful product!
Our Best Choice: Polaris RZR 1000 XP & S New Primary Clutch (Pretuned With Weights & Spring !) 2014-2021
Our rating:
(4.3 / 5)
(4.3 / 5)[ad_1] For a aftermarket clutch manufactured as a OE fashion Polaris most important (aka push) clutch manufactured particular for ALL 2014-2021 RZR 1000 XP & 2016-2021 RZR 1000-S products. This clutch is created and pre tuned just for RZR 1000 XP in contrast to other aftermarket ones I have witnessed. This will come proper for prepared to bolt on and trip with weights and spring now in it ! I have spent great volume of time testing and revising these clutches right before selling them to make certain they have easy and responsive functionality on RZR 1000-XP.
NEW Alternative RZR 1000 XP Main CLUTCH
Will come PRE TUNED WITH WEIGHTS & SPRINGS Currently IN IT!
Prepared TO BOLT ON AND GO!
A person Yr Guarantee !
Leave a Reply