When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated slide hammer bearing puller in 2021 Comparison Table
- Provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts
- Jaws can be set up for 2 or 3 jaw internal or external pulling jobs
- 5-1/2 lb slide hammer has a 5/8-18 thread
- Yoke fits axles with 4, 5, or 6 Studs in a circle from 4-1/2" To 5-1/2"
- Pulls rear axle on cars and 1/2-ton trucks with flange-type axles
- VERSATILE PULLER SET: The OMT 9-Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
- INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
- ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting.
- INSTRUCTIONS INCLUDED: To help novice DIYers get the job done right, we've included a detailed parts diagram and step-by-step instructions to simplify tough jobs like the piston wind-back process.
- 1-YEAR WARRANTY: In order to provide a worry-free shopping experience, we promise a 1-year warranty and 100% free exchange if the product is defective. Includes a protective carrying case to extend the life of your tools.
- DURABILITY, this bearing puller set features high hardness and toughness for optimal performance. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using.
- WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility
- EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
- PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
- PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.
- Slide Hammer And Dent Puller Kit
- Combination Puller With 5LBS Malleable Steel
- Drop Forged Steel Pullers And Attachments
- Converts Into A 2 Or 3 Jaw Internal Or External Puller For Reaching Hard To Reach Areas
- Blow Mold Case for Storage
- OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs
- Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals
- Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
- Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
- Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments
- Made to be the most reliable tools in the market today
- Tool solutions for most all situations
- Built to exceed tool standards
- Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles
- Can also be used as a slide hammer for dent pulling and gear pulling duty
- ◇ Perfect for pulling jobs requiring an internal pull, such as pilot bearings
- ◇ Includes 9 expandable collets, Fitting a wide range of applications
- ◇ Select the appropriate sized collet by comparing it with the application
- ◇ Insert collet, expand it to fit the hole, and attach the slide hammer assembly
- ◇ Slide Hammer Shaft: 1.2ft Long (390mm)
- Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts.
- Features: Internal and External Three Leg and Two Leg jaw puller yokes.
- 5lb. Slide Hammer, 425mm long, 5/8"UNF thread
- Front Hub puller, Rear Axle puller, Locknut Cone
- Dent puller screws (large and small), Supplied in blow mold storage case.
- Includes a 2-1/2 pounds slide hammer with a T-handle; 4 collets, fitting a wide range of applications
- Select the appropriate sized collet by comparing it with the application
- Insert collet, expand it to fit the hole, and attach the slide hammer assembly
- Overall Length: Bearing Extractor 1: 14mm-19mm; Bearing Extractor 2: 15mm-20mm; Bearing Extractor 3: 20mm-30mm; Bearing Extractor 4: 28mm-40mm
- Ideal for pulling jobs, against the bearing for pulling out evenly without damage the parts
- 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
- HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from 45# steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chrome moly steel to handle even the most stubborn blind bearings and bushings without trouble
- WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
- EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
- BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
Our Best Choice: OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods
[ad_1] This bushing and bearing software remover is uncomplicated to use for any individual wanting to clear away a pilot bearing on their guide transmission. Even though the bearing and pilot bushing remover can be utilised by men and women with all unique ability stages, this is specially useful for Diy mechanics, as replacing a pilot bearing can price tag more than $600 bucks. In just 4 steps, you can very easily clear away or improve a pilot bearing. Simply insert the pilot bearing puller guiding the bearing and turn the attachment housing to develop both equally jaws from the pilot bearing. Then simply just connect the slide hammer and use this bearings device to remove the bearing. These automotive bearing pullers are not just applied for pilot bearings, although. They can also be applied as a bushing tool on starters and generators. Given that this slide hammer adapter suits any 5/8” x 18” or 3/4” by 16” threaded rod, this blind gap puller tool is valuable in a wide variety of employment. This blind gap pilot bearing puller is composed of metal, building it crafted to withstand several assignments. Due to the fact this bushing and bearing removing resource can help save you money and is so effortless to use, you’ll be grateful to have this interior bearing puller at the all set when you have to have it.
Uncomplicated TO USE: The slide hammer bearing puller can be employed in four ways: Insert the pilot bearing puller, switch the attachment housing increasing equally jaws versus the pilot bearing, attach a slide hammer, and use the slide hammer to clear away the bearing
Help you save Cash: Having a pilot bearing changed in an auto shop could value you up to $650 You can save hundreds of bucks by working with this one particular pilot puller
Range OF Employs: Not only can this pilot bearing tool be utilized as a bearing puller, but it can also be utilized as a bushing device on starters and turbines This pilot bearing removing software will also healthy any 5/8” x 18” or 3/4” x 16” threaded rods
Durable: Designed from metal, this bearing and bushing elimination resource can face up to many years of typical pilot bearing work This blind hole bearing puller is crafted to very last
Dimensions: This pilot bearing remover is simple to retailer any place at just 10.4″ x 3.4″ x 1.3″. The blind bearing puller is also uncomplicated to wield, weighing in at just 13.6 ounces, building it a fantastic pilot tool