When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Table of Contents
- Top 10 Rated spot weld cutter in 2023 Comparison Table
- Our Best Choice: Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools
- Pro Tech spot weld cutter kit- Your High Performance Toolkit for Removing Spot Welds and DIY Repair
- Product Details
- Originality Spirit
- Best Gift for Repairment
Top 10 Rated spot weld cutter in 2023 Comparison Table
- 3) 3/8" Cutters; fit 3/8" and 1/2" hand held drill chucks
- Arbor Assembly (11123) with skip proof Pilot
- Extra pilot included
- Made of M2 high speed steel
- Made in the USA
- Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size.
- Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when one side gets dull you simply have to flip the bit around on its arbor assembly.
- Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal.
- Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- Spot Weld Cutter Tool：Easy to replace the blades when it begins to dull.
- ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates.
- ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck.
- ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
- ◆【Package Include】：1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8" cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover
- ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!
- DURABLE - Double-Sided 3/8" Heavy Duty High Speed Rotary Metal Cutting Blade Made From High-Quality Heat Resistant Steel.
- FAST - Quickly Separates Spot-Welded Panels Without Distortion. The cutting edge is sharper and the piercing ability is better.
- PERFECT SIZE - 3/8" Diameter Cutting Blade is Ideal for Removing Spot Welds.1/4" Standard Size Arbor with Flats to Eliminate Spinning in Chuck (fits 1/4" and larger drills). The cutter is wear resistance and smooth removal of scrap during operation.
- Save time and money with this bonus pack that includes 2 rotary spot drill with cutting blades PLUS 5 extra blades!
- Flexible Using- Great Spot Weld Cutter can be used for Iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc anywhere you think it can be helpful.
- High Standards:The double-sided blade is made of heat resistant thicker steel in high standards,which ensure quickly separates spot-welded panels without distortion,High strength and hardness.
- Size:Double-Sided 3/8" High Speed Rotary Metal Cutting Blade, 1/4" Standard Size Arbor with Flats to Eliminate Spinning in Chuck,The tool kits can provide better panel separations than a panel cutter.
- Feature:drilling stably,small incision resistance,high speed,do not breaking the border. the item great for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel,alleviates the need to pry and break welds
- Dedicated for:Double-sided blades with high efficiency. Dedicated for used on iron/cast iron/alloy steel/carbon steel/die steel/die grinder/drill holes/auto body renovations,etc
- Package content:1 x Cutter Drill With Double Cutter+10 x Extra 3/8" Cutters+2 x Pilot Pins
- 【Material】Made of high-speed steel material, high hardness and wear resistant.Center pin on the bit is spring loaded
- 【Suit For】Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets
- 【Easily Separate】Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc and cut small access holes
- 【Double Sided】This weld cutter is double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.Double sided 3/8 inch rotary blade and Hex Shank fit most drills
- 【Spot Weld Cutter Tool】Easy to replace the blades when it begins to dull
- [APPLICATION]: Use this spot weld drill bit to separate spot welds and resistance spot welding panels without distorting the sheet metal.
- [HEAVY DUTY]: Special grade high speed steel cobalt mix is designed for long service life to withstand quick speed running rate.
- [DURABLE]: Heat resistant titanium coating withstands high-performance metal and wood drilling when used in high temperature environments.
- [PRO GRADE]: Flat ground surface on bottom half of bit provides additional strength and chuck hold on any welding drill.
- [PRECISE]: Nibbed pilot tip design increases accuracy and prevents slipping when held down for marking purposes.
- Includes:5-pack spot weld cutter 3/8 inch heavy duty cutting blades and extra center pin for a long-term usage.
- Widely Usage:Suitable for thin stainless steel sheets, iron sheets, aluminum sheets,iron, cast iron, alloy steel, carbon steel or other thin metal sheets.
- 3/8 Inch:Fits for 3/8''handheld drill chucks or larger size and the spring loaded needle helps guide the cutting blades.
- Convenience:Easy to handle with and replace,fast and quickly separates spot-welded panels without distortion.
- High Quality Material:Made of high-speed steel material, high hardness and heat resistant.
- 📏Widely applicable*: The 3/8" cutting spot welds remover fits most 1/4" drills, arbor with flats to eliminate spinning in chuck. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- 📏High-quality Material*: The double-sided blade is made of heat resistant thicker steel in high standards. High strength and hardness, which ensure quickly separates spot-welded panels without distortion. Center pin on the bit is spring-loaded.
- 📏Spot Weld Cutter Tool*：Easy to replace the blades when it begins to dull
- 📏High Speed & Stable*: Drilling stably, small incision resistance, high speed, do not breaking the border. the item great for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel, alleviates the need to pry and break welds.
- 📏Package*: Our Spot Weld Cutter Set includes: 1 x Cutter Drill With Double Cutter+11 x Extra 3/8" Cutters+2 x Pilot Pins.
- Makes Spot-Weld Drilling Safer, Faster And Much Easier
- Automatic Bit Advance Feature With Sturdy Backing Hook
- Precise Cutting Depth Adjustment Allows Drilling Through Outer Panel Only With No Damage To Underlying Panel
- Spot Weld Capacity: 1/4" & 5/16" [6 & 8 Mm]
- Air Consumption: 4 Cfm [114 Lm]
Our Best Choice: Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools
(4.7 / 5)[ad_1]
Product Description
Pro Tech spot weld cutter kit- Your High Performance Toolkit for Removing Spot Welds and DIY Repair
3/8″ Spot Weld Cutter
Spot Weld Drill
Pilot Pins x 2
3/8″ Cutting Blades x 5
Perfect For Your Device Repair Needs
Drill holes
Auto body
Renovations
Die steel
Fix vehicle
…And more!
Product Details
Easily Separate
The spot weld cutter kit is suitable for drilling out spot welds on most vehicle panels including galvanised, boron, high stress steels and allows the removal of the top panel only, leaving the back panel intact.
Double Sided Design
Double sided rotary cutter blade help you saving time and money .when one side gets dull you simply have to flip the bit around on its arbor assembly.
Using tips –Keep it center
Before you beginning the Cut Pre-Drilling a Hole in the Center of the Spot Weld or Using a Center Punch to Create a Starting Point Provides Extra Guidance/Stability.
Originality Spirit
Superior Material
This Double-Sided 3/8″ Heavy Duty High Speed Rotary Metal Cutting Blade is made from High-Quality Heat Resistant Steel. Providing super fast cutting action quickly separates spot-welded panels without distortion.
Ergonomic Design
The whole design and producing is based on ergonomics to serve your repair work better.The handle dull polished and smooth surface, comfort to hold
Superb Grinding
Specially forged by seasoned craftsmen, the hardness of the cutting edge is up to 63-66 HRC. The cutting edge is sharper and the piercing ability is better.
Best Gift for Repairment
DURABLE – Double-Sided 3/8″ Heavy Duty High Speed Rotary Metal Cutting Blade Made From High-Quality Heat Resistant Steel.
FAST – Quickly Separates Spot-Welded Panels Without Distortion. The cutting edge is sharper and the piercing ability is better.
PERFECT SIZE – 3/8″ Diameter Cutting Blade is Ideal for Removing Spot Welds.1/4″ Standard Size Arbor with Flats to Eliminate Spinning in Chuck (fits 1/4″ and larger drills). The cutter is wear resistance and smooth removal of scrap during operation.
Save time and money with this bonus pack that includes 2 rotary spot drill with cutting blades PLUS 5 extra blades!
Flexible Using- Great Spot Weld Cutter can be used for Iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc anywhere you think it can be helpful.
Leave a Reply