When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated surface mount generator power inlet plug in 2022 Comparison Table
Bestseller No. 1
50-Amp Generator Power NEMA 3R Power Inlet Box, SS2-50P RV Indoor/Outdoor Waterproof Transfer Switch Inlet Box Plug, 125/250 Volts, Up to 12,500 Watts, ETL Listed
- Knockouts Notice: The thickness of the iron sheet used in BESYL Generator Inlet Box is 1.8mm which is thicker than generator inlet box of other brands. Due to thicker iron sheet, the knockouts are difficult to knock out. So, we need to use a hammer and a screwdriver to knock out them forcefully from the edge of knockouts..
- ETL LISTED. 50A, 125/250V, 12500W Power Inlet Box，NEMA CS6375 or SS2-50P inlet plug, compatible with all 50 Amp NEMA SS2-50P generator cord.
- It is designed to be installed outdoors in an open area where the generator is being used and perfect for backup power during a power outage.
- There will be on a green light on the flip lid when plugging into the generator cord and powering on the generator. By the green light, we can know it is working, which provides optimum performance and added safety. It is updated and safer than other style 80SS2-GYBX, PB50 etc.
- The inlet box is constructed of steel with rugged, anti-corrosive powder-coat paint and has a flip lid with green light to prevent moisture front entering the connector inlet when not in use.
Bestseller No. 2
NOCO GCP2 15 Amp AC Port Plug, 125 Volt Power Inlet Socket, and Waterproof Electrical Outlet Receptacle Box with Dual 18-Inch Integrated Outdoor Extension Cord
- AC Port Plug - A 125-volt power inlet socket with a dual integrated 18-inch outdoor extension cord for a car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications
- Waterproof - A rugged, waterproof ac electrical power inlet receptacle featuring a pressure fit rubberized cover rated for outdoor use and protects against the elements
- Peak Performance - Rated at 15-amps with heavy-duty 14 AWG copper wiring to maximum power flow and full-sized AC port prongs for maximum conductivity
- Plug-N-Play - A simple flush mount flanged power inlet that's easy to install, requiring zero cable modification or hand wiring, and mounts into a 2-inch hole size
- Multiple Uses - An outdoor extension cord designed for various uses, including onboard battery chargers, bumpers for engine block heaters, outdoor electrical outlets, and more
Bestseller No. 3
15 Amp Flanged Inlet 125V, GeepKey Lastest Shore Power Inlet Plug, NEMA 5-15 RV Plugs Receptacle with Waterproof Cover, Straight Blade/ETL Approved, 2 Pole 3-Wire, Black
- 15 Amp Flanged Inlet: This NEMA 5-15 15 amp inlet 125V is ETL certified, made of high-quality copper and black nylon plastic. No oxidation for the Nickel coated copper pole on the plug, which can avoid ultraviolet degradation and chemical substances. Damage, sturdy and durable, can work perfectly whether indoor or outdoor
- Upgraded Design: This RV Power Inlet has a socket cover (including thread, more tightening) and a back cover, which can protect it from heavy rain, snow and dust. And the applicable voltage range is wider (100V-125V), equipped with 4 upgraded stainless steel screws, providing a more sustainable and durable service life!
- DIY Preparation: 1-3 / 4" hole size, use 4 stainless steel screws (package gift) to more firmly fix the straight blade flange entrance on the hole or wall. There is no gap at the edge. Transparent straight-through terminal and attached Screw options make installation fast
- Easy to install: Even if you have very limited electrical knowledge, you can easily connect and reassemble this male receptacle according to our detailed instructions and following clear instructions.
- Multi-scene and Wide Use: This shore power plug widely used in RVs, campers, cars, trailers, boats, ships, marine heaters, houses, bumpers, embedded socket boxes, etc., not only as generators or battery charger plugs, but also for Power your electronic devices.
Bestseller No. 4
3 Pack Red Button AC 250V 10A IEC 320 C14 Panel Mount Plug Adapter Power Connector Socket Black Screw Mount 3 Pins Inlet Power Plug Socket by MUZHI
- -Product Name : Power Socket w Switch Fuse;Plug Type : 3 Pin IEC320 C14 Material (External) : Plastic, Metal;Color : Red, Silver Tone,
- -Voltage & Current : 10A, 250V AC;Hole in Top Face Diameter : 0.42cm / 0.16"
- -Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(L*W*H); Hole in Top Face Diameter : 0.42cm / 0.16"
- -Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(L*W)
- - Meets EC, UL, ULC, CE, CCC, and VDE standards
SaleBestseller No. 5
NOCO GCP1 15 Amp AC Port Plug, 125 Volt Power Inlet Socket, and Waterproof Electrical Outlet Receptacle Box with 16-Inch Integrated Outdoor Extension Cord
- AC Port Plug - A 125-volt power inlet socket with an integrated 16-inch outdoor extension cord for a car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications
- Waterproof - A rugged, waterproof ac electrical power inlet receptacle featuring a pressure fit rubberized cover rated for outdoor use and protects against the elements
- Peak Performance - Rated at 15-amps with heavy-duty 14 AWG copper wiring to maximum power flow and full-sized AC port prongs for maximum conductivity
- Plug-N-Play - A simple flush mount flanged power inlet that's easy to install, requiring zero cable modification or hand wiring, and mounts into a 2-inch hole size
- Multiple Uses - An outdoor extension cord designed for various uses, including onboard battery chargers, bumpers for engine block heaters, outdoor electrical outlets, and more
Bestseller No. 6
WELLUCK 15 Amp 125V AC Power Inlet Port Plug with Integrated 18" Extension Cord, NEMA 5-15 RV Flanged Inlet with Waterproof & Back Cover, 2 Pole 3-Wire Shore Power Plug for Boat
- 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor.
- 【Easy Reliable Installation】: 2" Hole size required, 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!
- 【 Weatherproof Cover】: ETL approved, and the rv electrical outlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak.
- 【No Need to Wire Up】 : The male receptacle is already wired up by 14AWG 18 inch extension cable with NEMA5-15R. Just plug in to connect the power.
- 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc
SaleBestseller No. 7
Leviton 5278-CWP Straight Blade Flanged Male Power Inlet Receptacle, 15 A, 125 V, Nylon Face, Body and Strap, Gray
- Super Tough Nylon Body Resists Damage From Severe Impact, Abrasion and Chemicals
- NEMA and Non-NEMA Configurations Available
- Positive Crimp Lock Wire Clamps
- Model number: 5278-CWP
SaleBestseller No. 8
15A Weatherproof Outdoor Power Outlet by Journeyman-Pro 15 Amp 125 Volt NEMA 5-15R Receptacle Kit with Integrated 20" Extension Cord + Waterproof Rubber Cover (GCR1-BLACK)
- ✔ MAX POWER - Full 15 Amp - 1875 Watts 125 Volts AC, Uses 14 AWG SJT Power Cord (Rough Service Cord)
- ✔ STRONG - Tough Nylon Body Resists Damage From UV Degradation, Impact, Abrasion, Chemicals
- ✔ VALUE - 20" Long 14 Gauge Extension Cord & Full Power Use for Battery Charging & High Power Tools
- ✔ SAFETY- cUL Listed Approved Plug 91GG,
- ✔ PRO'S CHOICE! Built To The Highest Quality with Lifetime No-B.S. Warranty!
Bestseller No. 9
GFORIT 30 Amp Generator Power Inlet Box, 125/250 Volt 7500 Watts Power Inlet Box, NEMA 3R L14-30P 4 Prong Generator Plug Receptacle Panel Cord for Outdoor Use, Weatherproof, UL Approved
- Generator Inlet Box 30 Amp 4 Prong: Power inlet box is an outdoor/watertight electrical inlet for a 30 Amp L14-30 generator cord. 125/250V, 7500W. Max wire Gauge:10AWG. It is designed to be installed outdoors in an open area where the generator is being used and perfect for backup power during a power outage.
- Safety Assurance: It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This generator inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors.
- Weatherproof & Rust Resistance: The front entry inlet has a weatherproof spring cover which closes when it is not working in order to prevent dust, humid air and water. It can provide the best protection in any bad weather!
- Unique Appearance Design & ABS Plastic Material，Not Leakage: Semi-transparent flip cover design, you can see the socket situation more clearly. There are two screws on the flip cover, which can be tightened when not in use. ABS Plastic Material，No leakage, more safe.
- Easy to Wire with Enough Space: Compared with ordinary boxes, we have increased the wiring space by 50%. There are generous wiring space and facilitates through-in. The front of the box is removable for easy placement and wiring.
SaleBestseller No. 10
WELLUCK 30 Amp Generator Power Inlet Box, NEMA 3R Power Inlet Box with 4 Prone, PB30, L14-30P, 125/250 Volt, 7500W Generator Inlet for Outdoor Receptacle, Generator Outlet, Weatherproof, ETL Listed
- 【ETL CERTIFIED】30A, 125/250V, 7500W GENERATOR INLET BOX with NEAM L14-30 inlet generator plug, designed for all 30 amp NEMA L14-30 generator cord. 10 AWG Wire Supported in Max. The Best Partner for generator to house power cord, providing and maintaining continous backup power supply from the generator outside, especially when short of power, terrible weather...
- 【POWER ON INDICATION】Upgraded with the Green Light Power on Indication on the lid, will light on when plug in and start power connection. Comparing with old version, WELLUCK power inlet box is more visible and safer when working, especially at night or dark area.
- 【LARGER SPACE】The front panel is removable for wiring up. Comparing with old version, larger space makes the whole installation easier and faster, what's more, the heat-dissipation will be better and guarrantee long lifetime.
- 【4 WAYS CONNECTION】1.2" hole drilling position on 4 areas (Left, Right, Bottom & Back) could connect to transfer switch and electric panel on multi-directions straightly. No more serious curving wire.
- 【WEATHERPROOF & RUST RESISTANCE】The whole metal body is covered by anti-rust powder coating and the fliping cap could be shut down when it is not working in order to prevent dust, humid air and water.
Our Best Choice: AC 250V 15A IEC320 C14 Male Power Cord Inlet Socket with Fuse Holder,3Pin Inlet Module Power Connector Socket with 3pcs Wires(Pack of 2)
Our rating: (4.8 / 5)
(4.8 / 5)[ad_1] Overall Measurement : 33 x 44 x 21mm/1.29″ x 1.73″ x .82″(L*W*H)
Plug Form : 3 Pin IEC320 C14
Module Identify(Module Back Label): DE-14-F1
Max Existing Enter(Module Back again Present Label, Longitudinal): 15A 250 VAC
Max Fuse Dimension Install(Module Again Fuse Label, Transverse): 15A 250 VAC
Terminal Pin Size: 4.8×0.8mm/.19×0.03in
Gap Middle Length : 36 mm / 1.42 in
Voltage/ Recent : 15A, 250V AC
Gap in Prime Confront Diameter : 3.5mm/ .138in
Fuse Ampere(Presupposed): 15A
Particular remarked:
You can improve fuse according to your various specifications, but make sure fuse size not extra than 15A, Fuse Dimensions is 5*20 mm / .2*.8 in(D*L)
Day To start with Obtainable : November 25, 2019
Manufacturer : FILSHU
ASIN : B081ZFHRGW
Solution Title : IEC 320 C14 SocketPower Offer(Max.) : AC 250V 15A
Pay back attention to:This Electric power Socket swap is set up well in a entire established,it can be used in directly when get it
Inlet Module: Normal IEC320 C14, Mounted Fuse: 15A
Greatly utilized inside of laptop or computer, house equipment or Do-it-yourself small venture on ability supply distribution and manage
Offer Content: 2 x Power Inlet Socket 6 x Wires
Leave a Reply