When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated valve spring compressor 04 4.6l ford in 2022 Comparison Table
- ✿OUTSTANDING DESIGN:Roller ball thrust bearing provides smooth operation even with uprated performance valve springs.
- ✿CHEAPER BUT STURDY:made of high quality aluminum,textured and durable.
- ✿SAVE YOUR TIME:can change your valve spring in short time and won't damage your parts.
- ✿EASY TO USE:allows easy replacement of valve stem seals, valves, springs, and retainers.(you can use a little antisneeze on the threads)
- ✿COMPATIBLE WITH CAR MODEL: Ford Mustang GT F150 4.6L 5.4L 2V Romeo Windsor Lincoln Mercury(you can see the detail in the picture or the product description)
- Quickly install valve springs, retainers, and keepers
- No need to remove cylinder head from engine block. Won't slip and damage the cylinder head
- Made in USA. CNC machined T6061 aluminum, and anodized for excellent finish and durability
- We (EuroExportInc.) are the original creators and manufacturers of the tool
- Beware of fake, cheap, and low quality copies. The copies contain non durable, cheap parts
- Superior Material: Rugged Materials and Robust Construction Ensure This Valve Spring Compressor Will Get the Job Done; Durable Corrosion Resistant Finish.
- Fast and Efficient: Allows a Quick and Easy Service for Camshaft, Valve Seal, Valve Spring or Retainer with Great Convenience.
- Superior Design: Our Valve Spring Compression Tool is Slanted, Which Prevents It from Damaging Metal While Using the Engine Springs Compression Tool; Valve Spring Remover Gets the Job Done Fast and Safely
- Compact Size: Small Valve Spring Compressor Makes It Easier to Work in Compact Areas; Lightweight Valve Retainer Tool Lessens Hand Fatigue While Replacing and Removing Valve Springs and Servicing Camshafts
- Application: Used to Compress the Valve Springs, Fits for F-ord 3V 4.6L and 5.4L Engines Key Product Features
- OTC Valve Spring Compressor
- Designed to compress valve springs on 3-Valve Ford 4.6L and 5.4L V8 engines
- Rugged materials and robust construction ensure this valve spring compressor will get the job done
- Durable corrosion resistant finish
- Similar to OE No. 303-1039
- 10-PIECE VALVE SPRING SET: This clamp set by Orion Motor Tech includes a wide C clamp, 3 extension rods (3" 4.4" & 4.4"), 5 collet adapters (16 19 23 25 & 30mm), and a 4-inch hand lever
- SAFE & SIMPLE OPERATION: Instructions guide simple use, selecting the best sizes for compressing the valve springs or dealing with cylinder heads safely during removal and installation from almost any automotive, motorcycle, or other small engine
- SOLID DURABLE CONSTRUCTION: Our C clamp and other parts are forged from carbon steel, heat treated and coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs
- EASY STORAGE & TRANSPORT: The reinforced blow-molded case keeps everything organized, easy to carry, and just as convenient to stow away between jobs
- SATISFACTION GUARANTEED: Order knowing that Orion Motor Tech's usual strong warranty and friendly 24/7 customer service ensures these automotive tools and equipment will give you years of helpful service!
- This cam repair tool complete combo kit make your job a lot easier and much time-saving.
- Allows you to replace rocker arms, lash adjusters, and other valve components without removing the camshaft.
- Easy to replace timing kit-camshaft, cam pasher, crankshaft, timing chain and others
- Cam Phaser Lockout Kit Noise solution kit Locks the phasers into a fixed position and the ticking noise stops completely. Eliminate the noise and prevent it from reoccurring in the future.
- Timing Chain Locking Tool: This tool Kit helps you finish camshaft or cam phaser changes without losing chain tension and solve the noise problem. Consists of firm metal rod and hard lemon yellow plastic wedge
- LOCK IT DOWN: Has your 4.6L, 5.6L, or 6.8L gas engine started sounding like a diesel? End those ticking, tapping, and knocking noises once and for all with this cam phaser lockout tool set by Orion Motor Tech.
- EASY TO USE: This cam lock tool set includes a cam phaser lockout tool and all the parts needed to lock your engine's timing so you can get it where it needs to go: a crankshaft holding tool, a timing chain locking tool, an engine valve spring compressor, and a crank pulley bolt. Step-by-step instructions guide quick and easy application so you can reliably get your engine running like new pdq.
- LONG LASTING: These engine tool parts are all made with structural-grade 45# steel heat treated for maximal strength and corrosion resistance.
- WIDE COMPATIBILITY: This cam phaser lockout set is compatible with 2006-2008 Lincoln Mark LTs and a wide range of Ford vehicles: the 2004-2010 5.4L F150; 2005-2009 F250, F350, F450, and F550 Super Duty; 2005-2010 Mustang; 2005-2012 Expedition and Navigator; 2006-2010 Explorer and Mountaineer; 2009 & 2010 4.6L F-150; and more. See above for the full fitment list.
- QUALITY ASSURANCE: These parts have been rigorously tested to provide the finest craftsmanship and most reliable parts on the market. OMT backs these parts with our usual strong warranty and friendly 24/7 customer service, ensuring that you’ll enjoy their use for years to come!
- This Valve Spring Compressor Clamp Tool Set is used to easily and safely compress valve springs for remove or installation, suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment
- Includes 5 adaptors: 16mm, 19mm, 23mm, 25mm & 30mm; suitable for a wide range of vehicles.
- The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression
- All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings
- The forged steel construction of this set provides superior strength and hardness.
- Compatible with Explorer/Mountaineer/Sport TracExpedition/Navigator, F-150, F-Super Duty 250/350/450 /550/650/750 and Mustang (equipped with Ford 4.6 5.4 and 6.8 3V engines)
- Cam Phaser Lockout Kit: Lock the phaser in a fixed position to effectively solve the noise problem.
- Timing Chain Locking Tool: Same as OTC 567617,This tool kit helps you to complete the camshaft or cam phaser replacement and maintain the tension on the timing chain.
- Valve Spring Compressor tool: Compress the engine's valve springs without disassembling the camshaft. It can easily replace rocker arms, valve lash adjusters and other valve components.
- Crankshaft Positioning tool: Easily replace the camshaft or cam phaser on the vehicle without losing chain tension or removing the timing cover.Note: When removing the timing chain and installing the cylinder head, do not rotate the crankshaft and/or camshaft.
- ITEM SPECIFICATIONS: This tool is designed to compress valve springs for quicker and easier camshaft, valve spring, valve seal, and retainer service for Ford, for Lincoln, and for Mercury 2-Valve 4.6L V8 engines, 4.6L 4V engines, 5.4L V8 engines, and 6.8L V10 engines (1991-2004). Compatible with Ford 2V overhead cam engines with direct contact to the valve stem, this tool also works for exhaust valves on 4V engines.
- DESIGN CONSIDERATIONS: This Valve Spring Compressor is made of heavy duty Chrome Molybdenum steel with a rust- and corrosion-resistant Manganese Phosphate coating, so you know it's designed to last, and thanks to precision machined components, you can expect an exact fit every time. Designed to be used with your 3/8-inch breaker bar or ratchet, you can attach your tool of choice to this valve spring compressor from either side depending on your needs.
- COMMON APPLICATIONS: Whether the engine has already been removed or remains installed with the cylinder head on or off, this valve spring compressor will help you service camshafts, valve seals, valve springs and retainers. Please Note: This tool is not intended for use on Triton 5.4 3V or any other 3V or 4V engine.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Valve Spring Compressor, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Our Best Choice: 9U5Z9C915H Evaporative Emissions Vapor Canister Purge Valve Solenoid,Fits for 2009-2018 Ford Fusion Edge Escape Mustang F350 Super-Duty Lincoln Replaces 911-222 CX2626 EVAP Vent Purge Control Valve
[ad_1] Replace Part#:CX2626, 9U5Z9C915H, 9U5Z-9C915-H, 911-222.
Fits for Ford Lincoln Mercury Mazda 2009-2018 with 2.0L 2.5L 3.0L 3.5L 3.7L 5.0L 5.2L 6.2L L4 V6 V8 Engines
2011-2018 Ford Edge
2009-2018 Ford Escape
2011-2017 Ford Explorer
2011-2017 Ford F-150
2013-2018 Ford F-250 Super Duty
2013-2018 Ford F-350 Super Duty
2013-2018 Ford Flex
2010-2018 Ford Fusion
2011-2018 Ford Mustang
2013-2018 Ford Police Interceptor Sedan
2013-2018 Ford Taurus
2014-2018 Ford Transit Connect
2015-2018 Ford Transit-150
2015-2018 Ford Transit-250
2015-2018 Ford Transit-350
2015-2017 Ford Transit-350 HD
2009-2011 Mercury Mariner
2010-2011 Mercury Milan
2010-2011 Mazda Tribute
2017-2018 Lincoln Continental
2013-2016 Lincoln MKS
2013-2018 Lincoln MKT
2013-2018 Lincoln MKX
Please make sure the interchange part number matches the part you are replacing.
Please check our photos and make sure the part shown looks identical to your stock one.
1Pcs Vapor Canister Purge Valve
If you have any questions, please contact us by email, we will reply you within 24 hours and provide you with a solution.
If you are satisfied with our products and services, please give us a five-star rating, thank you!
★ Replace Part#:CX2626,9U5Z9C915H,9U5Z-9C915-H,911-222. Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping.
★ Fits for Ford Escape Fusion Edge Explorer F-150 Lobo Mustang Transit Connect F250 F350 Super Duty F350 Super Duty Taurus Flex Transit-150 Transit-250 Transit-350 HD Police Interceptor Sedan; Fits Lincoln MKS MKX MKT Continental; Fits Mercury Mariner Milan; Fis Mazda Tribute with 2.0/ 2.5/ 3.0/ 3.5/ 3.7/ 5.0/ 5.2/ 6.2 Liter L4 V6 V8 Engine Including Years 09 10 11 12 13 14 15 16 17. Please kindly check the Fitment and Replace Part Number before Ordering, Thanks 🙂
★ Top-quality EVAP Valve,Metal and plastic construction for long lasting durability and reliability. Even though this is not a genuine Ford or Motorcraft original equipment vapor canister purge solenoid, but it works even better and lasts longer at a much lower price.Designed for enduring resistance to harsh road and weather conditions.Helps to reduce atmospheric pollution due to hydrocarbon emissions.
★ Driving anywhere depends on smooth and efficient operation of EVAP System, especially the EVAP Canister Vent Control Solenoid. With this purge valve, you can get rid of troubles such as “Check Engine Light; Error Code Like P1450 P0172 P0175 P0456 code; Car keeps stalling after refueling; Bad Engine Performance and EVAP Emissions High”.Restores on- board diagnosis of the EVAP system.
★ Please check Fitment and Part Number before Ordering!100% Satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!