When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated vinyl plank cutter in 2022 Comparison Table
- Product Type : Tools
- Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick
- Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
- Sturdy High-Quality Steel And Aluminum Construction
- Design for cutting LVP,LVT,VCT,WPC,PVC,Luxury Vinyl Planks. Cutting unapproved materials will void warranty. Not for business; For home indoor DIY installation!
- No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
- 13" cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
- 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service life,man-made damage is not covered by the warranty.
- " L & 凵" cut and Lengthwise cut is suitable for soft flooring. SPC has a stone powder composition, the material is brittle and high in hardness, so it will crack. So these three cutting methods are not suitable for SPC. Replacement Blade: https://www.amazon.com/Sharp-Blade-Flooring-Cutter-LVT-330/dp/B07GF8PWD2?ref_=ast_sto_dp
- Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.
- No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
- Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut (Soluring gve the installation of wall and corner). Clearly marked measuring guide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it!
- 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 5000 square feet except SPC), Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade.
- Replacement Blade; https://www.amazon.com/Sharp-Tungsten-Flooring-CutterLVP-230-affordable/dp/B07GF7XWMZ?ref_=ast_sto_dp
- For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”) wide and 16mm ( 5/8”) thick
- The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank.
- A shear blade , included a 600 Grit oilstone to keep sharp. Replacement blade;
- Straight cut and 45 degree angle cut. Clean and Straight cutting edg.(Fingers away from the sharp blade!). No electricity, no dust, quick, quiet and Easy to use.
- Item weight 23.1 lbs
- Cuts flooring up to 13" (330mm) wide Pergo. LVP, RCV & Laminate
- Lightweight and portable. Made in the USA with Global Materials
- Moveable fence for 45° (up to 8" / 203mm wide) and 90° cuts
- Cuts laminate and vinyl up to 12mm thick, Cuts engineered wood (up to 10mm thick and 1200 Janka
- Robust, metal-jacketed bearings for enhanced durability - Also improved assembly
- Design for cutting LVP, LVT, VCT, WPC, PVC, Vinyl Plank Flooring, Photo and Engineered paper.
- No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
- Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).
- 0-45° Angle Cutting, Translational cutting.Easy to use and to carry around, you will like it!
- Cut Where You Work - Save time walking to and from your saw
- One shear blade outlasts over 20 saw blades
- Quiet Operation / No Electricity - Cut anytime day or night
- DUST FREE cutting provides a healthier job site
- Made in the USA
- Cut Where You Work - Save time walking to and from your saw
- One shear blade outlasts over 20 saw blades. Built in ruler and moveable fence for 45° (Up to 14 in. or 355.6 mm wide) and 90° cuts
- Quiet Operation / No Electricity - Cut anytime day or night
- DUST FREE cutting provides a healthier job site
- Made in the USA
- 13" Cutting capacity
- Sliding extension table supports longer boards (41" Working length)
- Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank, cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
- 28-1/2" Handle for increased leverage
- Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet ($30 value)
- Cutter for laminate floor,LVT/VCT/LVP/PVC/SPC/WPC/ Vinyl Plank.
- Width of Plank Cutting:210, 300 (mm) / 8,12 (inch).
- It can also make "L" Cutting, free angle cuts and lengthwise cuts(For Soft vinyl floor).
- The cutter has a movable V support, which can be used to keep the board level and cut at the same time.
- No dust, No noise, No electricity needed, Easy and Professional , Save time,Much safer than a saw blade.
Our Best Choice: MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate, Carpet tile, Siding,Rigid Core Vinyl Plank and more
[ad_1] 20 in Pro Flooring Cutter,For Carpet tile, Laminate, Engineered flooring,MDF, Fiber cement siding,LVT,VCT,SPC, LVP,WPC,Vinyl Tile Flooring and far more.The max. slicing size: 510 mm (20 “), and max. reducing depth: 16 mm (5/8 “).Straight cut and 45 angle minimize. it will reduce at 45 degrees on a 14 inch plank. No dust, no noice, no energy necessary.
For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and additional, up to 510mm (20”) wide and 16mm ( 5/8”) thick
The max. slicing length: 510 mm (20 “), and max. slicing depth: 16 mm (5/8 “).Angle Reducing: -45,it will lower at 45 levels on a 14 inch plank.
A shear blade , provided a 600 Grit oilstone to hold sharp. Substitute blade
Straight reduce and 45 diploma angle lower. Thoroughly clean and Straight slicing edg.(Fingers away from the sharp blade!). No electric power, no dust, quick, peaceful and Straightforward to use.
Product bodyweight 23.1 lbs
Leave a Reply