When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated wall cutter in 2022 Comparison Table
- ✅ Blade Features: D6A+M2 6 inch bi-metal smooth blade, both sides have inverted teeth to increase the pulling force,three cutting surfaces leads to 50% faster than traditional versatile tooth.
- ✅ Ergonomic Grip Design: Lightweight jab saw with soft grip and slip-resistant handle, ergonomically designed for continuous use with minimal fatigue, larger handle guard for improved safety.
- ✅ Practical & Durable: Sharpened tip with an oblique angle for plasterboard or splint.Precision cross-ground teeth cut in both push and pull directions for fast, clean, and effortless cutting. Deep gullets between saw teeth keeps blade free of material.
- ✅ Applicable Object: Suitable for drywall, wallboard, plywood, cement board, thin paneling and PVC.
- ✅ What's Included: A jab saw with comfortable grip.Professional developed to meet your expectations.If you are not satisfied with the jab saw,never hesitate to contact us . Always need your suggestion to make progress.
- Concrete Cutting Machine - designed to carve into masonry&concrete a small channel to insert a metal or plastic conduit for electrical wiring
- Machine Parameter- Voltage: 110v, Powder: 4800w, Channel width: 1.65"(adjustable)，Channel depth: 0-1.57" (adjustable)，Length the cable: 3m
- Easy use - Machine weight 6.2kg，the handle can be rotated as required. Equipped with infrared locator, you can use infrared positioning in advance drawn line cutting.When the cover on the saw blade is opened, a 90 degree corner can be cut
- Certified Safe - Adopt high power copper electromechanical, Maximum load power 5500w,with leakage protection function. Dust catcher (Need to buy) and the pump both work at the same time,effectively reduce dust in the process of work
- Wide application - This Wall slotting machine can used for decoration and industrial wall/floor grooves.You can cut grooves in concrete, brick, marble, etc
- Faster forming speed: adjustable width and depth for quick and easy.
- One-shot molding, stable and precise: the wall slotting machine is equipped with infrared rays and rollers. When working, it uses the roller to stabilize the propulsion while aiming with infrared rays to make the lines straighter.
- Easy to hold: weight 6.5kg, the handle can be rotated 180 ° left and right, to achieve a person without assistants can also work effort, increase the efficiency of work.
- Safety: All high-power copper machines, power supply voltage 110v, load up to 4000w, , and the machine is not burned; the two devices of vacuum cleaner and water pump work at the same time to reduce the dust during work, taking into account your health; the switch is equipped with a waterproof cover. Protect the power supply from leakage, reduce the risk of leakage, and protect you from harm.
- Multi-purpose use: wall slot machine can cut concrete, marble, granite, lightweight bricks and other materials, can also be used for wall wire line slotting, can adjust the width and depth when cutting, the width can be based on the blade How many adjustments can be made up to 44mm and the depth can be adjusted to 42mm.
Replacement blade ASIN: B083DTNVXM
- Time and cost saving: ready groove in one working step, 110V/50Hz, 6500-rpm carbon-brush motor and up to 4800W engine power is powerful enough to cut marble.
- Diamond channel cutter with 5 diamond blades for bridgeless channel cutting up to 42 mm wide and 40 mm deep.It features a retractable magnesium blade guard that makes tight corner cuts possible.
- 360° slotted without dead ends - 360 degrees cutting feature of the device makes it result much better and straighter.
- Channel equipped with a comfortable D-handle for two-handed operation thanks to ergonomical handle and tool-free adaptation.
- Machine is guided in cutting direction and guarantees ergonomical working position and easy controll of the cutting proceeding. Includes pump, water hose and carrying case.
- Adjustable Electric Wall Slotting 125 MM: This electric concrete slotting machine features a one-time molding for quick and clean cutting of wall chases. And the groove width and depth are adjustable to meet the need of different wall chases. Maximum depth: 41 mm. Maximum width: 42 mm. Saw blade diameter: 125 mm.
- Infrared Design & Moveable Cover: The electric wall cutter machine is designed with an infrared lighting and moveable cover. The infrared rays make positioning and cutting more accurate. The protective cover, which can block dust, is also moveable to achieve no dead angle slotting.
- Water Pump for Dust-Free Environment: Our concrete cutter machine comes with a water pump and a long water pipe, which can be used to control the dust produced so as to protect users' safety. Besides, this grinder wall chaser also supports a vacuum cleaner, not included in our package.
- Excellent Portability & High Efficiency: This wall chaser cutter is highly efficient with two ergonomic handles that are both angle adjustable and a pure copper motor which provides good support for the operation of the machine. Furthermore, it comes with a leakage protector for safety.
- Easy Installation & Wide Application: It is easy to install the saw blades(1 to 8pcs). This electric concrete saw machine is widely used in decoration companies, professional hydropower installation projects, and construction sites, suitable for ceramic cable ties, concrete, red brick, hollow brick, marble, and so on.
- RATED VOLTAGE- 220V/50Hz.(Not support 110V,please make sure you can use it with 220V.Thank you.)
- Magnesium alloy head shell, 4000W high power; Importance: When cutting the vertical groove, the machine head is facing down, so as to prevent the motor from entering the water, causing burnout or leakage.
- 360 ° slotted without dead ends,Suitable for quick and clean cutting of wall chases Groove cutting depth can be set
- Clean slotted, safe to use.Ensure the safety of the users by the electric leakage protector
- Light handle, easy to operate,Slot width adjustable
- Nisorpa Professional Ceramic Tile Cutter can cut floor wall tiles, such as ceramic porcelain marble, Maximum Cutting Thickness 14mm/0.55inch,Effective Cutting Length 630mm/25inch
- The angle can be adjusted from left to right (0~45°). High material utilization and no cutting loss. Separated only once to have a neat incision.
- The graduated scale is precise and uniform in size. Fine measurements can be made when cutting tiles, ensuring that each data of every piece is accurate.
- Easy to install, save time and effort. Free-standing telescopic platform device, no need to use electricity.
- The back nut fixing, better adjustment of machine head, suitable for glass of different thickness. The handle stretches smoothly, improving work efficiency.
- Sufficient to replace: the set contains a total of 2 rectangular slot cutters, each size is about 3.74 x 2.36 x 1.5 inches/ 9.5 x 6 x 3.8 cm, compatible with most cutting tool tools
- Cutting precision: the knife slot will be mounted on the oscillating cutter tool, you can nicely hit the size of the knife slot size of the hole, the knife is pointed, pay attention to safety when using
- Fast and simple to use: owing to rectangular shape, this slot cutter has 4 sides of the blade height consistent, while you are cutting, fast and simple, and the cutting surface is smooth and neat
- Sturdy and stubborn: with quality stainless steel material, this slot cutter is wear-resistant, strong, sturdy, no rust, not easy to break, can serve you for a long time; With fine workmanship and advanced silver, it looks beautiful
- Widely applied: this electrical wall box cutter is suitable for cutting plastic, metal or low voltage electrical box installations; Cut out holes in the wall to make socket installation easier
- 👍 Specifications - Voltage 110v, Power 4800w, rated speed 6200r/min.
- 👍 One Time Molding - Fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases .Without any auxiliary tools and the second process. Cutting groove depth can be randomly controlled.
- 👍 Adjustable - This wall groove cutting machine equipped with 2 handles, on can rotate 180 degrees and the other one can rotate 90 degrees, to meet different work needs. Groove cutting depth can be set. An Angle of 90 degrees can also be cut.
- 👍 Dustproof - There are two dust removal way of this wall slotting machine, water-wet dedusting and wing-absorb dedusting. This wall chaser comes with a water pump, using this pump when slotting, to atomize dust, protect health.
- 👍 Wide Application - This electric grooving machine is for brick, granite moorstone, marble griotte, high standard concrete. Idea for electricians, plumbers and other contractors.
- Multifunction Wall Groove Cutting Machine is 4800w with laser. Its depth is 40mm, and maximum width is 42mm. The advantage is that no dead corners in one molding, water pump dust removal, and vacuum cleaner dust removal.
- 4800W high power wall groove machine, the speed up to 6500r/min, which can improve your work efficiency and labor saving.
- Full copper wire motor, high temperature resistance, prolong service life.
- It is suitable for super-hard wall operations such as concrete pouring walls, black-hearted red bricks, cinder bricks, even can be used on steel bars!
- The two devices of vacuum cleaner and water pump work at the same time to reduce the dust during work in order to protect your health. The switch is equipped with a waterproof cover, Which protect the power supply from leakage, and reduce the risk of leakage.
Our Best Choice: HAUTMEC Professional One-Piece 6 Inch 150mm Junior Hacksaw, Compact Design Small Hand Saw HT0145-HS
Powerful compact A single-piece aluminum body and substantial qualiy blade tensioning screw for professional apps and extensive daily life
Adjustable blade angle provides 6 (6) slicing positions
Ergonomic rubber grip and cushioned head to give a good and comfortable handle, The blade is securely held by a bolt and nut
Contains (1) 6″ (150mm) Hacksaw Blade of Higher Speed Metal
Designed for passion and tiny-venture programs