When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Best water hammer arrester in 2022 Comparison Table
- Piston-type water hammer arrester
- 304 stainless steel arrestor body
- 3/4" female hose thread on branch
- 3/4" male hose thread on trunk
- Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture
- Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine
- Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass
- Trunk: 3/4" male hose thread - Branch: 3/4" female hose thread
- Certified by ASSE to the ANSI/ASSE 1010-2004 standard, AA size cUPC listed to UPC and Canadian codes and standards
- Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-c tested)
- Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems
- Allows for installation in 2 × 4 wall cavity
- Certified by the American society of sanitary engineering to the ANSI/asset 1010-2004 standard
- ✧Application: Watflow Water Hammer Arrestor are designed to eliminate water hammer. It can absorb shock and vibration to prevent water hammer noise.
- ✧Material：Stainless steel hose and lead free brass body, which is solid and rustproof.
- ✧Thread: 3/4"GHT Female x 3/4"GHT Male. It can fit universal washing machine hose.
- ✧Installation: Select a location as close to the source of shock as possible. Use one unit for each hot and cold water line.
- ✧Range: It designed especially for use in light commercial or residential applications on lines up to 250psi working pressure.
- Prevent water hammer noise and absorb shock and vibration，protect your plumbing system
- Connection: 3/4"GHT F x 3/4"GHT M
- Max working pressure: 250psi, temperature range 33 deg F to 180 deg F
- Material：Stainless steel+lead free brass
- Can be installed horizontally, vertically and in any position easily
- Sioux Chief Mfg
- Straight water hammer arrester
- Compatible with press fitting systems such as Viega ProPress and all push fitting systems such as Cash Acme SharkBite
- Sweat connection
- AA size
- 1/2-Inch male connection
- Equipped with 1/2 inch Crimp PEX Inlet and 3/4 inch Male Hose Thread(MHT ) Outlet Connections
- Lead Free 1/4-Turn Hot and Cold Ball Valve with Water Hammer Arresters Installed
- Measures 9.25 inch x 3.5 inch x 8 inch
- Includes a Pre-installed Support Bracket,a Faceplate Cover
- Easy to Install
- Easy to install in horizontal, vertical and other position.
- Reduce the unstable water pressure and noise, protect your toilets..
- Product components:stainless steel 304 tube with piston , lead free brass tee.CUPC and NSF listed.
- Max working pressure: 250 PSI, temperature range: 33 F to 180 F.
- Connection:swivel ballcock nut with 7/8 inch female thread , 7/8 inch male thread.
- Price For: Each Max. Pressure: 150 psi Temp. Range: 33 Degrees to 180 Degrees F Overall Height: 4-5/16" Body Material: Stainless Steel with Brass Adapter Item: Water Hammer Arrestor Factory Set Pressure: 25 to 35 psi Connection Type: MNPT Diameter: 4-13/32" Pipe Size: 1/2" Country of Origin (subject to change): United States
Our Best Choice: Sioux Chief Chief-660-HB 660-HB Water Hammer Hose Arrestor, 3/4-Inch
[ad_1] Sioux chief 660-HB piston-style h2o hammer arresters shall be mounted where expected on washing equipment valves. Water hammer arresters shall be specially sized and have ample volume of air to dissipate the calculated kinetic power produced by closing household washing equipment valves. Arresters shall be mounted on both equally warm and chilly source inlets of washing equipment valves. Arresters shall be accredited for set up with no entry panel necessary.
Piston-type h2o hammer arrester
304 stainless steel arrestor overall body
3/4″ female hose thread on department
3/4″ male hose thread on trunk