When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Are you interested to know more about repairing a garbage disposal? A garbage disposal is considered as an inevitable component of kitchen and helps in reducing clogging problems, repairing a garbage disposal requires adequate and quick attention. It is nothing less than a daunting task. There can be countless reasons why a garbage disposal stops working properly. Here are some of the excellent solutions for garbage disposal repair in the best possible way.
Experiencing an Unusual sound
If your disposal is creating an unusual sound, there is a possibility of some electrical issue. First of all, you have to check that whether it is properly plugged in or not. If you unplug it once and plug-in, then you will not hear any unusual sound again.
Sometimes, the garbage disposal does not grind smoothly and efficiently. Then you must check that whether ample water is running while operating the unit or not. Weakening and breakage of blades or using old blades can also lead to inappropriate grinding. In this case, you can replace the old blades and it will result in smooth functioning of grind.
Leakage in Garbage Disposal
Statistics assert that garbage disposal leakage occurs in bountiful homes. If there is any leakage in the disposal, the connection may be loose. Apart from tightening the connection, you need to replace mounting screws or drain gasket. You have to find the leaking place by turning on water. When the water will flow in sink drain, you can determine the problem. If mounting bolts are loose, you can tighten them. If there is a leakage in dishwater connection, please check and tighten tension of clamp on hose of dishwater. If still the leakage is not stopped, you need to install a new dishwater hose.
Jamming of Disposal Motor
While working in kitchen, jewellery or food items such as potato peels and cornhusks can lead to jamming of disposal motor. As soon as you notice that motor is jammed, you need to clean the motor and remove the occurring substance, which jams the motor. Please check whether the motor is connected with impellers or not.
How to Unclog a Garbage Disposal
Firstly, you need to know where the clog exists. For unclogging the disposal, you need to have a hex wrench or Allen wrench, which is an exceptional tool that comes with the disposal. Furthermore, you can also run plenty of water inside the drain. Additionally, you can also use a wooden spoon to unclog. It is indispensable to tighten up the unit and replace it if needed at any point of time.
Impellers not shredding the food waste
This is a commonly found problem, which can be solved easily. At any point of time, if the impellers do not grind the food waste, it simply indicates that the flywheel needs to get serviced. Once the flywheel is repaired, the garbage disposal will rotate to spin impellers that grind food waste. You need to keep in mind that turning on stuck flywheel for a long time can result in burning of motor.
Choosing Right and Effective Tools
Prior to use any tool for repairing a garbage disposal, it is extremely important to evaluate trustworthiness and strength of the tool. When you see the hole, you need to insert Allen wrench or hex key properly. Then, rotate it in an appropriate manner.
To keep a garbage disposal in top-notch condition, it is necessary to avoid apple seeds, grease, meat, and coconut shells as these are major impediments due to which clogging, jamming and other problems can occur. Apart from this, you can make use of ice cubes, cold water and rock salt inside the garbage disposal. Before using all these, make sure to turn off the device.